Capacitive sensor, high temperature sensor, inductive sensor, photoelectric sensor, proximity sensor, ultra small sensor.
Pressure sensor, temperature sensor, level sensor, linear position sensor.
Inductive proximity sensor, capacitive sensor, photoelectric sensor and wireless sensor.
Sensor.
Digital information system, digital sensors.
Metal threaded body, m30, flushed/non-flushed, 10-30vdc, sn:10mm/15mm, npn/pnp, no/nc, cable /connector connection/reverse polarity, surge, overload and short-circuit protection, yellow led indicator, ip67 M30*43, m30*55
Inductive Sensor M6.5 standard packing Plastic bag
DC Inductive Sensor M5 standard packing Plastic bag
Details: Mounting f nf Sn 10mm 15mm Power supply 10-30vdc/90-250vac Housing size m30*43 m30*55 Thread size m30*1.5*43 Output npn/pnp no/nc Temperature drift ¤10% Hysteresis 120% Repeat accuracy 3% Load current 200ma Residual voltage 2.5v Consumption current 10ma Protection circuit surge, overload, short-circuit, reverse polarity Indicator yellow led Ambient temp. -2570 Ambient rh 35-95% Frequency 500 hz 300 hz Protection degree ip67 Housing material nickel plated brass Connection pur cable 2m/m12 connector Standard packing plastic bag
Model: ghpp6250 Package: sop14 Pressure range: 20kpa - 250kpa Pressure type: absolute pressure Applications: compressed natural gas pressure (cng) / engine control Remark: for more details, pls contact me(sennie) directly. Export cartons
Signal-type wiegand sensor wg214 Wiegand sensor Signal type wiegand sensor supplier Features No need the power supply when it works. Bipolar excitation working mode, the sensor outputs a pair of positive and negative electrical pulse signal when the magnetic field polarity changes for a circle. Only when the external magnetic field polarity changes, and magnetic strength reaches the excitation threshold, the sensor will outputs a pulse signal, so the vibration won, t happen. The operation is stable and reliable. The signal amplitude has nothing to do with the magnetic field changing speed, and it can work at the speed near to zero. The output signal can be remote transmitted by the signal lines, so it, s suitable for lan management. No mechanic contact, no spark, is a kind of intrinsic safety devices. Wide operating temperature ran ge, strong environmental adaptability. Principle outline Zero power consumption sensor wg112 ( it also be called wiegand sensor) is a kind of new type magnetic component that is made based on wiegand effect. It can initiative generate energy, no need external power when it works. It can give a sharp voltage pulse signal. The sensor consists of a special processed alloy wire and induction coil which winds on the outside of wire , framework and pins etc. The alloy wire owns double magnetic structure, its core is soft magnet, and the shell is hard magnet. To utilize the magnetic difference between the alloy wire, s inside and outside, under excitation by suitable strength of alternating magnetic field, the core magnetization direction everted in a moment, the direction became same or opposite with that of shell, and make the magnetic field around alloy wire changed suddenly, then a group of positive and negative pulse generated in the induction coil. The pulse amplitude is only regard with strength of the excitation field, and it has nothing to do with the field changing speed. It realized , zero speed counting detection.
Linear hall sensor ah3509 Hall sensor Hall switch features Rated working voltage 4.5 v ~ 6 v, Operating temperature range: -40 ~ 125; Rail to rail voltage output, rated output current : 6 ma , Variety of package forms and outer packings for your choice. No mechanical contact, no spark, switch signal stability, no shaking moment, high reliability and safety; Products meet the eu rohs instruction 2011/65 / eu and reach regulations 1907/2006 / eu requirements Outline The sensor will pass linear area /nonlinear area/ saturation area during the magnetic induction increases. When there is no magnetic field that applies in sensor (b=0), when the output voltage of sensor is only half of vcc (vcc/2); when n pole faces mark surface of sensor, and be closed to it gradualy (b-, the output voltage begins to decrease, and the voltage doesnt reduce with the increased magnetic field; when the s pole of magnet faces the mark surface of the sensor and is closed to sensor gradualy b+, the output voltage of sensor begins to increase, and it doesnt increase with the increased magnetic field after it reaches saturation voltage.
Latch type hall sensor ah4059 Hall sensor Hall switch Features Rated working voltage 4.5 v ~ 24 v, the limit voltages as low as 3.5 v; Operating temperature range: -55 ~ 150; Â rated output current (sink) : 300 ma, it can directy drive the coils of dc motor (fan ). Special design make the sensor owns imunity to logic race condition, short switch time and good switch sensitivity. No mechanical contact, no spark, switch signal stability, no shaking moment, high reliability and safety; Products meet the eu rohs instruction 2011/65 / eu and reach regulations 1907/2006 / eu requirements. Ah4059 bipolar two ends complementary output switch type hall sensor, when the pole faces the sensors mark surface and is closed to sensor (b?bopoutput terminal vo1 outputs low level, and the output terminal vo2 outputs high level; when the pole aces senosors mark surface and is closed to sensor , b?brpoutput terminal vo1 outputs high level, the output terminal vo2 output low level. Stable h
Micropower Omnipolar Hall Sensor AH3663 Hall Sensor Hall Switch Features Micropower designing; Rated supply voltage �2.4 V ~ 5.5 V; Omnipolar operating, no N or S pole in excitation magnetic field, high magnetic sensitivity, highly symmetry in positive and negative magnetic switch point; Built-in dynamic imbalance voltage compensition circuit, high temperature stability, Small temperature drift in switch point, resistant to mechanical stress and thermal stress, the power consumption is only 8W when the power supply is 2.75V; Products meet the EU RoHS instruction 2011/65 / EU and REACH regulations 1907/2006 / EU requirements.
Unipolar type hall sensor ah3144 Hall sensor Hall switch Features Rated working voltage 4.5 v ~ 24 v, the limit voltages as low as 3.5 v; Operating temperature range: -40 ~ 150; Rated output current(sink) : 25 ma, the maximum output current(sink): 50 ma; Switch response time is about 1s, the operating frequency dc ~ 100 khz; Small temperature drift between operating point and release point; There are variety of packages and out packing options; No mechanical contact, no spark, switch signal stability, no shaking moment, high reliability and safety; Products meet the eu rohs instruction 2011/65 / eu and reach regulations 1907/2006 / eu requirements. Outline When the s, pole of magnet faces thbrp, the sensor outputs high level. When the n, pole faces the mark surface, the sensor is no response. Stable hysteresis(, bh= |bop- brp|, ensure the stable sensors switch status.
Flow-sensors Flow meter Flow meter sensor, flow sensors Product description Medium flow solution Food grade material, it can be worked in the water which temperature is 100, c. Wide operating voltage range Stable square wave signal No need external circuit, No need customer to install magnetic field General application: Teaset, supply equipment etc for civil use, and appliance for commercial use. Feature: The through type hall effect flo w sensor ah-001 is based on hall effect element, and it's very simple to use, the output signal is square wave, and it's accurate and reliable, the customer can use it by connect it as per the operating note, it can be applied in the digital circuit and mcu simply. The food grade material make it can be applied in different occasions, the operating temperature can reach 100, c.
Gear sensor Gear sensor china, gear sensor manufacturer Company relies on its advanced technology strength, rich industrial experiences and veracious market visibility, it established abroad strategic cooperation relations with top professional manufacturers of ic designing, manufacturing, package and testing in the united states and taiwan and home, and the company all along exerts the most advanced designing and manufacture technology to ensure the product and technology in the highest flight, and furthest ensure the coherence and reliability and stability of the products. The products of , nanjing ah electronic science & technology co., ltd , includes ah series unipolar hall switch ic, ah series bipolar hall ic, ah series latch hall switch ic, ah series linear hall ic, wg series zero power consumption magnetic sensor, and all kinds of customized products.
Linear hall sensor ah3507 Hall sensor Hall switch Features Rated working voltage 4.5 v ~ 6 v; Operating temperature range: -40, ~ 125, Rail to rail voltage output, rated output current : 6 ma; Variety of package forms and outer packings for your choice; No mechanical contact, no spark, switch signal stability, no shaking moment, high reliability and safety; Products meet the eu rohs instruction 2011/65 / eu and reach regulations 1907/2006 / eu requirements. Ah3507 is a kind of analog signal output hall ic, the output voltage changes with the changes of magnetic field. The sensor chip has built-in reverse voltage protection, voltage regulators, temperature compensation circuit, hall-voltage generator, signal amplifier, and other circuit unit etc. Excellent voltage regulator and temperature compensation circuit ensure the sensor stab le operates ove r a wide voltage range and temperature range, and the reverse voltage protection circuit avoids the sensor to be damaged by reverse voltage.
Micropowr hall sensor ah3662 Hall sensor Hall switch Features Micropower designing; Rated supply voltage , 2.4 v ~ 5.5 v; Omnipolar operating, no , nor , spole in excitation magnetic field, high magnetic sensitivity, highly symmetry in positive and negative magnetic switch point; Built-in dynamic imbalance voltage compensition circuit, high temperature stability, small temperature drift in switch point, resistant to mechanical stress and thermal stress, the power consumption is only 8, w when the power supply is 2.75v; Built-in pull-up resistor; Products meet the eu Rohs instruction 2011/65 / eu and reach regulations 1907/2006 / eu requirements. Outline Ah3662 is a kind of high sensitivity omnipolar micropower hall sensor. The special designing circuit enable the sensor has omnipolar (no , sor , npole) magnetic field excitation function, excellent positive and negative switch symmetry, and bitty average power consumption current. When the magnet (no , sor , npole) is closed to sensor, , , the sensor outputs low level; when the magnet is far away from sensor the sensor outputs high level.
Hall effect encoder Coder sensor Code sensor manufacturer Company relies on its advanced technology strength, rich industrial experiences and veracious market visibility, it established abroad strategic cooperation relations with top professional manufacturers of ic designing, manufacturing, package and testing in the united states and taiwan and home, and the company all along exerts the most advanced designing and manufacture technology to ensure the product and technology in the highest flight, and furthest ensure the coherence and reliability and stability of the products. The products of , nanjing ah electronic science & technology co., ltd includes ah series unipolar hall switch ic, ah series bipolar hall ic, ah series latch hall switch ic, ah series linear hall ic, wg series zero power consumption magnetic sensor, and all kinds of customized products.
