Model: SJ3000 2.5kw Rated Frequency ( Hz ): 50 / 60 Rated Voltage ( V ): 110 / 120 / 220 / 230 / 240 Max. Power Output ( KW ): 2.8 / 3.0 Rated Power Output ( KW ): 2.5 / 2.7 Phase: Single Voltage Regulate: AVR Power Factor: 1 Engine Model: SJ170F Bore Stroke ( mm ): 70 54 Compression Ratio: 8.5 : 1 Starting System: Recoil Start Engine Oil Capacity ( L ): 0.6 Fuel Tank Capacity ( L ): 15 Engine Type: Forced Air-Cooled, 4 Stroke, Single Cylinder N.W. / G.W. (KG): 42 / 45 Dimension (LWH): 610 450 465 20FT (set): 240
Model: SJ3500-1 3kw170F Rated Frequency ( Hz ): 50 / 60 Rated Voltage ( V ): 110 / 120 / 220 / 230 / 240 Max. Power Output ( KW ): 3.2 / 3.5 Rated Power Output ( KW ): 3.0 / Phase: Single Voltage Regulate: AVR Power Factor: 1 Engine Model: SJ170F Bore Stroke ( mm ): 70 54 Compression Ratio: 8.2 : 1 Starting System: Recoil Start Engine Oil Capacity ( L ): 1.1 Fuel Tank Capacity ( L ): 25 Engine Type: Forced Air-Cooled, 4 Stroke, Single Cylinder N.W. / G.W. (KG): 62 / 65 Dimension (LÃ?WÃ?H): 695 530 580 20FT (set) : 13 0
Model: SJ5500 5kw Rated Frequency ( Hz ): 50 / 60 Rated Voltage ( V ): 110 / 120 / 220 / 230 / 240 Max. Power Output ( KW ): 5.5 / 6.0 Rated Power Output ( KW ): 5.0 / 5.5 Phase: Single Voltage Regulate: AVR Power Factor: 1 Engine Model: SJ190F Bore Stroke ( mm ): 90 64 Compression Ratio: 8.3 : 1 Starting System: Recoil Start Engine Oil Capacity ( L ): 1.1 Fuel Tank Capacity ( L ): 25 Engine Type: Forced Air-Cooled, 4 Stroke, Single Cylinder N.W. / G.W. (KG): 84 / 86 Dimension (LWH): 695 530 580 20FT (set) : 130
Single cylinder, forced air cooling,4-stroke gasoline engine Model: GX160 5.5hp Displacement: 163 (cc) Bore Stroke: 68mm 45mm Rated Power Output: 4.6HP (3.4)KW / 3600rpm Max. Power Output : 5.5HP (4.0)KW / 3600rpm Torque (N.M): 11 / 2500 Compression Ratio: 8.5 : 1 Fuel Tank Capacity: 3.6 (L) Engine Oil Capacity: 0.6 (L) Engine Type: Forced Air-Cooled, 4 Stroke, Single Cylinder Ignition System: Transistor Magneto Starting System: Recoil Start N.W. / G.W. (KG): 15 / 17 Dimension (LWH): 400 370 375 20FT (set): 520
Single cylinder, forced air cooling,4-stroke gasoline engine Model: GX200 6.5hp Displacement: 196 (cc) Bore Ã? Stroke: 68mm Ã? 54mm Rated Power Output: 5.5HP (4.0)KW / 3600rpm Max. Power Output : 6.5HP (4.8)KW / 3600rpm Torque (N.M): 13 / 2500 Compression Ratio: 8.5 : 1 Fuel Tank Capacity: 3.6 (L) Engine Oil Capacity: 0.6 (L) Engine Type: Forced Air-Cooled, 4 Stroke, Single Cylinder Ignition System: Transistor Magneto Starting System: Recoil Start N.W. / G.W. (KG): 15 / 17 Dimension (LÃ?WÃ?H): 400 Ã? 370 Ã? 375 20FT (set): 520
Model: SJ3200 2.8kw Rated Frequency ( Hz ): 50 / 60 Rated Voltage ( V ): 110 / 120 / 220 / 230 / 240 Max. Power Output ( KW ): 3.0 / 3.2 Rated Power Output ( KW ): 2.8 / 3.0 Phase: Single Voltage Regulate: AVR Power Factor: 1 Engine Model: SJ170F Bore Stroke ( mm ): 70 54 Compression Ratio: 8.5 : 1 Starting System: Recoil Start Engine Oil Capacity ( L ): 0.6 Fuel Tank Capacity ( L ): 15 Engine Type: Forced Air-Cooled, 4 Stroke, Single Cylinder N.W. / G.W. (KG): 43 / 46 Dimension (LWH): 610 450 465 20FT (set) : 240
Model: SJ7000 6.5kw with recoil starter Rated Frequency ( Hz ): 50 / 60 Rated Voltage ( V ): 110 / 120 / 220 / 230 / 240 Max. Power Output ( KW ): 6.5 / 7.0 Rated Power Output ( KW ): 6.0 / 6.5 Phase: Single Voltage Regulate: AVR Power Factor: 1 Engine Model: SJ190F Bore Stroke ( mm ): 90 64 Compression Ratio: 8.3 : 1 Starting System: Recoil Start Engine Oil Capacity ( L ): 1.1 Fuel Tank Capacity ( L ): 25 Engine Type: Forced Air-Cooled, 4 Stroke, Single Cylinder N.W. / G.W. (KG): 85 / 88 Dimension (LWH): 695 530 580 20FT (set) : 130
Model: SJ7500E 7.5kw Rated Frequency ( Hz ): 50 / 60 Rated Voltage ( V ): 110 / 120 / 220 / 230 / 240 Max. Power Output ( KW ): 8.0 Rated Power Output ( KW ): 7.5 Phase: Single Voltage Regulate: AVR Power Factor: 3 Engine Model: SJ192FE Bore Stroke ( mm ): 92 66 Compression Ratio: 8.3 : 1 Starting System: Recoil Start & Electric Start Engine Oil Capacity ( L ): 1.1 Fuel Tank Capacity ( L ): 25 Engine Type: Forced Air-Cooled, 4 Stroke, Single Cylinder N.W. / G.W. (KG): 90/93 Dimension (LWH): 710540595 20FT (set) : 130
Model SJ10000 Rated Frequency ( Hz ) 50 / 60 Rated Voltage ( V ) 110 / 120 / 220 / 230 / 240 Max. Power Output ( KW ) 10.0 / 11.0 Rated Power Output ( KW ) 8.5 / 9.0 Phase Single Voltage Regulate AVR Power Factor 1 Engine Model SJ2V78F Bore Ã? Stroke ( mm ) 78 Ã? 72 Compression Ratio 8.3 : 1 Starting System Electric Start Engine Oil Capacity ( L ) 1.4 Fuel Tank Capacity ( L ) 25 Engine Type V-TWIN-Cylinder,Forced Air-Cooled, 4 Stroke N.W. / G.W. (KG) 158 / 165 Dimension (LÃ?WÃ?H) 92? 69? 780 20FT (set) 48
15 years experienced sauna generator and heater manufacturer in shenzhen, china. Contact freely whenever you need.
Packaging: Export wooden packageBrand: Saihu, OEMTransportation: Ocean,Land,AirPlace of Origin: Zhejiang, ChinaCertificate: ISO9001, SGS, CE, ASME
Model No.: SJM-1/8-SJM-300/8Usage: OxygenPurpose: Gas separationParts: Adsorption TowerNoise Level: LowCertification: SGS, CE, ISO
Specifications: CBN Type PSA Nitrogen generator Flow: 5-3000Nm3/h Purity: 95%-99.999% Dew-point temperature: -40° C or -60 ° C Pressure: 0.1-0.8Mpa
VPSA Oxygen station 1. Compenents of VPSA Oxygen station 1.1 Air Fan and Vacuum Pump Air fan provide air source for the whole system. Based on VPSA oxygen generator design condition and customer requirements, fan with proper outlet air pressure is to be provided. Vacuum pump ensures correct system operation and keeps the system in ideal vacuum state, which ensures equipment constantly adsorb nitrogen and produce oxygen. 1.2 Temperature Regulating System Air temperature regulating system is made up of a water cooler and an electric heater. The temperature of air compressed by fan is around 65oC-70oC, passing the water cooler, its temperature is reduced to meet the requirements of process operation. Then it is sent into the adsorption towers. In winter, the temperature of air is to be increased by the electric heater and reaches the requirements of process operation. 1.3 Adsorption System The adsorption system mainly consists of two towers filled with zeolite molecular sieve adsorbents and piping valves etc. Air enters into the bottom of one tower, when passing through the adsorbent layer,N2, Coxygen, Vapor are adsorbed by molecular sieve and oxygen passes through the adsorbents and gathers at the top of tower, flowing out as produced gas, meanwhile the other tower is in the process of regeneration. When the adsorbing tower almost reaches saturation, by the operation of control system, the processing air flows into the regenerated tower and begins to produce oxygen.Two towers alternately adsorb and constantly produce oxygen . 1.4 Oxygen Buffer Tank Compared with three-tower process, oxygen generator with two towers can not produce consecutive oxygen, therefore, a buffer tank with large volume is needed for stable oxygen output. 1.5 Control System 1.5.1 System process is achieved by DOS control system. In this system, valves switches are independently controlled by PLC (Programmable Logic Controller). Analog signals of test sensors communicate with the main control system through specific communication protocols. Relevant data of specific unit can be sent to main control system and remote control signals of main control system can be accepted by specific unit. 1.5.2 In order to ensure safe oxygen supply, functions of interlink, protection, alarm, print, record etc can be provided. 1.5.3 The output variation of oxygen supply can be adjusted by DCS control system. System operating parameters can be adjusted to save energy. 1.5.4 The main control system adopts industry computer, provided with specific software and convenient human-machine touching screen, Start/stop and operating parameter collection can be realized on control panel. Remote monitor and print of running status record can be easily achieved.
Cryogenic Air Separation Plant 1. Model: KDN-100 2. MOQ:1 set 3. Warranty:1 year 4. Delivery:5-7 months
Capacity: 1-1000 Nm3/hr Purity: 99.5% Outlet pressure:0.2 - 0.4 bar Crygenic oxygen plant -
Automatic lighting surge generator (or lighting surge immunity) sg61000-5 is used to assess the power cord and connect the internal switch stood in line to connect the internal switch to provide a common basis for switching the natural world and lightning caused by the high-energy transient interference performance. Performance fully meets the iec 61000-4-5, en61000-4-5 and gb/t17626.5 standards. Specifications: Product modelSg61000-5Sg61000-5tSg61000-5h12Sg61000-5h Output voltage (open)1.2/50µs±20%1.2/50µs±20%1.2/50µs±20%1.2/50µs±20% Output current (short)8/20µs±20%8/20µs±20%8/20µs±20%8/20µs±20% Output impedance2o2o2o and 500o2o and 500o Output voltage range0~6kv±10%0~6kv±10%0~12kv±10%0~10kv±10% Output current range0~3ka±10%0~3ka±10%0~6ka±10%0~5ka±10% Surge repetition1~9999 times1~9999 times1~9999 times1~9999 times Interval time20~9999s20~9999s20~9999s20~9999s PolarityPositive, negative or positive/negative automatic Phase shiftAsynchronous, synchronization 0°~ 360° or specific angle Coupling/decoupling network (cdn)Includes a 16a single phase cdnIncludes a 20a 3phases cdnIncludes a 30a 3phases cdnBuilt-in 20a 3phases cdn Dimensions (wxdxh)44x45x35cm44x45x55cm56x69x165cm56x69x155cm Gross weightAbout 30kgAbout 48kgAbout 300kgAbout 270kg Touch screen with super big lcd and built-in windows ce
Our factory can supply the whole range of gasoline generatores with power from 3KW to 5KW up to 10KW, and with voltage between 220V and 380V optional. Our gas generators feature high performance, easy operation and easy maintenance and good prices and have been exported to many countries. Interested Buyers please contact with us for full details. You want diesel generators? No problem. They are right in our product line. Please have a check and find them.
ZYWS hypochlorous acid water generator ZYWS hypochlorous acid water generator is a hypochlorous acid-based water generator specially developed by our company for water channel sterilize and diagnosis and treatment of oral comprehensive treatment tables. Features 1.Colorless transparent liquid, non-toxic, non-irritating, non-residue, broad-spectrum sterilize, rapid, easy to use. 2.Concentration control by different levels is adopted, and one machine can be used for two purposes, completely solving the water sterilize and diagnosis and treatment water of the comprehensive treatment table, and effectively reducing microbial pollution. 3.It adopts PLC intelligent control and touch screen man-machine interface, which is easy to operate and can detect various water quality indicators online to ensure that the produced water is qualified. 4.Multiple uses, can replace compound borax gargle, and is suitable for sanitation of hands, skin and mucous membranes, general object surfaces and environmental surfaces, and sterilize of textile items.
Product Description SPE-300 hydrogen generator SPE-300 hydrogen generator adopt technology-top tech in the world. full name is Proton Exchange Membrane. Also called SPE technology ( solid polymer electrolyte).QL series hydrogen generator is our patented products, which are light , highly effective , energy-saving and of environmental protection , producing extremely pure hydrogen (99.999%) through the electrolysis of pure water (without adding alkali). Application of SPE-300 hydrogen generator: 1.Total Hydcarbon analyzer support gas 2.GC (gas chromatography) fuel gas and carrier gas(replace h2 cylinder) 3.Chromatography Make Up gas 4.ELCD (conductivity detector) reaction h2 gas(replace h2 cylinder) 5.AED (atomic emission detector) of the reaction h2 gas(replace h2 cylinder) 6.Pure h2 gas supply for fuel cell 7.Other pure h2 using field SPE-300 300ml/Min 4bar Pressure Automatically Hydrogen Generator SPE-300 300ml/Min 4bar Pressure Automatically Hydrogen Generator Technical Parameter of SPE-300 hydrogen generator Type SPE-300 Output Volume (ml/min) 0~300 Output Pressure 0.15~0.4 H2 purity (%) 99.999 Protective Pressure 0.46 Power Voltage (V) Input power (W)
