Find Verified Beverages Suppliers, Manufacturers and Wholesalers

Aspartame
Aspartame is a non-carbohydrate artificial sweetener, as an artificial sweetener, aspartame has a sweet taste, almost no calories and carbohydrates. Aspartame is 200 times as sweet sucrose, can be completely absorbed, without any harm, the body metabolism. aspartame safe, pure taste. currently, aspartame was approved for use in more than 100 countries, it has been widely used in beverage, candy, food, health care products and all types. Approved by the FDA in 1981 for spreading dry food, soft drinks in 1983 to allow the preparation of aspartame in the world after more than 100 countries and regions are approved for use, 200 times the sweetness of sucrose.

Xanthan gum is a popular food additive that's commonly added to foods as a thickener or stabilizer. When xanthan gum powder is added to a liquid, it quickly disperses and creates a viscous and stable solution. This makes it a great thickening, suspending and stabilizing agent for many products
APPLICATION
For food:Xanthan gum can improve the texture, consistency, flavor, shelf life and appearance of many foods.
It's used frequently in gluten-free cooking since it can provide the elasticity and fluffiness that gluten gives traditional baked goods
Personal Care Products:Xanthan gum is also found in many personal care and beauty products. It allows these products to be thick, but still flow easily out of their containers. It also allows solid particles to be suspended in liquids
Industrial Products:Xanthan gum is used in many industrial products due to its ability to withstand different temperatures and pH levels, cling to surfaces and thicken liquids, all while maintaining good flow.

Sucralose is a non-caloric, high-intensity sweetener that is 600 times sweeter than sucrose. Sucralose retains its sweetness over a wide range of temperatures and storage conditions in variety of applications. Because of its extended shelf-life stability, food manufacturers use Sucralose to create great tasting new foods and beverages in categories such as canned fruit, low-calorie fruit drinks, baked goods, sauces and syrups. Sucralose also can be used as a sweetener in nutritional supplements, pharmaceuticals, vitamins, and mineral supplements.

Innovative sweetening ingredients can help reduce calorie content in foods, while meeting consumer taste expectations.

It has about 600 times the sweetness of sugar and, depending upon the application, can be used to replace nutritive sweeteners such as sugar or glucose syrup.

Sucralose is heat stable in cooking and baking and works well in a broad range of food and beverage systems including low-pH environments and in the presence of live cultures.

Food and beverages formulated with sucralose elicit a lower blood glucose response thansimilar products with sugar.

Unlike sucrose and glucose, sucralose has the added benefit of maintaining tooth mineralization and is non-cariogenic.

Creamer (non-dairy creamer) comes in various specifications, primarily distinguished by three dimensions: application field, fat content, and packaging form. In simple terms, you can choose based on what product it will be used in, what kind of taste and texture you want, and the quantity required.

Classified by application field

The formulas of different types of creamer (such as fat and protein ratios, emulsification stability) are adjusted according to specific application scenarios to ensure optimal results.

For coffee: Representative models include K40, K60, K28, etc. The fat content is usually between 28% and 35%. It can significantly enhance the richness and whiteness of coffee, as well as boost its aroma.
For milk tea: Representative models include 30C, 32A, 35B, C40, T40, T50, T90, etc. The fat content is usually between 30%-35%. It provides a smooth and rich milky flavor and is one of the core ingredients in milk tea shops.
Special for baking/cold drinks/confectionery: Representative models include B60, 60A, etc. The fat content ranges widely, typically from 30% to 75%. It is used to enhance the crispiness and texture of pastries and biscuits, and is also commonly used in ice cream to add a creamy texture.
For solid beverages: Representative models include K30, etc. The fat content is relatively low, ranging from 20% to 35%. It is used in instant oatmeal, nutritional powder, etc., primarily to enhance flavor and lubricity while reducing costs.

Divided by fat content

Fat content is crucial for influencing the taste and cost of a product, and the fat content of creamer can be adjusted flexibly, ranging from 5% to 82%. This can cater to different needs:

Low-fat type: about 5% - 20%.
Medium-fat type: about 20% - 50% (The fat content of creamer specifically for coffee and milk tea, which is approximately 28%-35%, usually falls within this range).
High-fat type: about 50% - 82%.

The C series products from Nestle, for instance, are categorized based on their fat content: the C/40 type has a fat content ranging from approximately 31.1% to 38.0%, while the C/50 type has a fat content ranging from approximately 17.5% to 21.3%.

By packaging type

The most common standard specification on the market is 25kg/bag, with inner packaging mostly being food-grade plastic bags and outer packaging being cardboard boxes or woven bags. For convenience in daily use or sample testing, there are also smaller packaging specifications on the market, such as 1kg/pack 20 packs/unit or 25kg/bag.

Model: Sprint 5S

Technical Specifications:
1. Dimensions: height 545mm, width 385mm, depth 440mm
2. Net Weight: 27kg
3. Electrical Supply: 220V-240V / 110V-120V 50Hz / 60Hz
4. Power Supply: 1.95kw
5. Water Supply: Both internal and external connection of water supply
Fitting connection: 3/4"
6. User Interface: 8 selection push buttons and 32 digit alphanumeric display
7. Canisters:
4S version: 4 instant canisters.
5S version: 5 instant canisters of which 1 double.
6S version: 6 canisters.

Choice devices:
1. Base cabinet (height: 920mm) as table as table and / or for purified water barrel and disposable paper cups.
2. Coin acceptors with high distinguishing modulus can identify all coins around the world.
3. Water pump is available for purified water barrel.

180 cup fully automatic tabletop vending machine, available in espresso and instant version.

Features:

Electrical Supply: 220V-240V / 110V-120V 50Hz / 60Hz
Power: 1800W
Big Coffee bean capacity: 1200g
Dimension (mm): 670*465*540
8 product selections
1 coffee bean canister, 4 instant powder canisters for sugar, milk, chocolate etc.

Equipped with a grinder-doser that allows a constant dosing and grinding of the coffee,
as well as a long life of the grinder blades.

Optional Accessories:
1. Base cabinet (height: 920mm) as table for purified water barrel.
2. Coin acceptor and Contact less IC card system as well as free vend are optional.
3. Water pump is available for purified water barrel.
4. Branding option is acceptable.

Tang Drinking Powder

6X2.5KG

$40.00 FOB Jebel Ali

Flavours

Lemon

Mango

Orange

Pineapple

Wholesale Glass Beverage Dispenser with Stand

Pacetgreen supplies glass beverage dispensers for homeware retailers, importers, wholesalers and private-label programs.

Our beverage dispensers combine a clear glass container with practical dispensing taps and optional metal stands, making them suitable for water, juice, lemonade, iced tea and other cold beverages.

Product Features:

â?¢ Food-grade soda-lime glass
â?¢ Clear glass body with different patterns and shapes available
â?¢ Available in approximately 3Lâ??8L capacities
â?¢ ABS or stainless-steel tap options
â?¢ Metal stand available
â?¢ Wide-mouth opening for easy filling and cleaning
â?¢ Suitable for water, juice, lemonade and iced beverages
â?¢ Regular export packing or customized color box
â?¢ EPE protective insert available
â?¢ Logo, packaging and private-label customization supported
â?¢ OEM & ODM service available

Reference Product:

3.8L Glass Beverage Dispenser
Packaging: Color Box
Tap: ABS
Reference FOB Price: USD 1.98 / Piece

MOQ: 500 Pieces per item

Trade Term: FOB Qingdao, China

Samples: Available

Packaging Options:
Standard export carton, customized color box, EPE protective packing and retail-ready packaging.

Suitable for:
Homeware retailers, kitchenware stores, supermarkets, wholesalers, importers and private-label brands.

Please send us your preferred capacity, tap material, stand requirement, quantity and packaging requirement for quotation.

Pacetgreen supplies wholesale glass beverage dispensers with spigots for juice, lemonade, iced tea and party drinks.

Made from durable soda lime glass, these dispensers are designed for household, retail and lifestyle markets.

Features:
- Clear glass body for attractive beverage presentation
- Convenient spigot design for easy serving
- Suitable for juice, lemonade, iced tea and infused water
- Multiple capacities available
- OEM and ODM service supported
- Customized packaging and private label available

Material:
Soda Lime Glass

Minimum Order Quantity:
500 pieces

Trade Term:
FOB Qingdao

Place of Origin:
Shandong, China

We welcome inquiries from importers, wholesalers, distributors, supermarkets, homeware retailers and private-label brands.

Name:Butylparaben
Appearance: White crystalline powder
Melting point: 68-71 �ºC
CAS NO.: 4247-02-3
Loss on drying: â?¤0.5%

Butyl Paraben widely used in Pharmacy industry (Chinese herbal medicine/patent drug; medical instruments sterilization); Food industry(dairy products, pickles, beverage, fruit juice/jelly, confectionery); textile industry (dry goods, cotton yarn, chemical fibers), as well as antiseptics in cosmetics, feedstuffs, daily-chemicals.

Sodium carboxymethyl cellulose (CMC) has a variety of functions in foods such as thickening, suspension, emulsification, stabilization, shape retention, film formation, expansion, preservation, acid resistance and health care. It can replace guar gum, gelatin, The role of agar, sodium alginate and pectin in food production is widely used in modern food industry, such as lactobacillus drinks, fruit milk, ice cream, sherbet, gelatin, soft candy, jelly, bread, fillings, pancakes , Cold products, solid beverages, condiments, biscuits, instant noodles, meat products, paste, biscuits, gluten-free bread, gluten-free pasta, etc. Used in food, it can improve the taste, improve the grade and quality of the product, and extend the shelf life.

For Food industry:
Food grade for dairy drinks and seasonings, CMC can thicken, stabilize and improve taste. In addition, CMC is also used in ice cream, bread, cake, biscuit, instant noodle and fast paste food for product molding, taste improvement, water retaining and tenacity strengthening.

For Detergent Industry:
Effectively prevent washes from becoming contaminated after being washed by synthetic detergent. Also make washing liquid more viscous and the effect of washing more stable

All kinds of frozen vegetables, such as peas, asparagus, spinach, broccoli, etc.

What is Xanthan Gum?
Xanthan gum is a popular food additive that's commonly added to foods as a thickener or stabilizer.Though Xanthan gum sounds like it was created in a science lab, it's an entirely natural product. Made from fermented corn sugar that has been broken down by a plant bacteria called Xanthomonas campestris, the remaining residue is then dried and turned into a powder known as the food additive xanthan gum.

Xanthan gum has become a vital ingredient in gluten free baking. It helps goods made from gluten-free flours like almond flour and buckwheat flour bind together and develops elasticity-a job commonly completed by gluten. For individuals with celiac disease or gluten sensitivity, this ingredient plays a vital role in recreating traditionally gluten-full treats sans gluten.

These binding properties create goods with similar textures that hold together during the baking process. Many gluten free recipes don't bind well without xanthan gum and result in baked goods that crumble. Xanthan gum recreates gluten's stickiness while ensuring that the recipe remains gluten free.When xanthan gum powder is added to a liquid, it quickly disperses and creates a viscous and stable solution. This makes it a great thickening, suspending and stabilizing agent for many products.

Xanthan gum description:
Xanthan gum is an extracellular acidic heteropolysaccharide produced by the fermentation of xanthomonas campestris bacterium. Made from corn starch and other carbohydrates through the processes of cluturing, extracting, evaporating and grinding, it is widely used in industries such as food, oil, ming and textile.
Function:
Widely used as salt/acid resistant thickener, high efficient suspension agent and emulsifier, high viscosity filling agent in
various food and beverage. It can not only enhance the performance of water-keeping and shape-keeping, but also improve the freeze/thaw stability and taste of food and beverage products.

Frozen Pot Stickers and Spring Rolls are premium ready-to-cook food products prepared from high-quality ingredients, including fresh vegetables, meat, seafood, and wheat flour wrappers. Produced under strict hygiene standards and Individually Quick Frozen (IQF) technology, they retain their authentic flavor, texture, and nutritional value. Ideal for restaurants, hotels, supermarkets, catering companies, and frozen food distributors, these products offer convenience, consistent quality, and long shelf life, making them an excellent choice for domestic and international B2B food markets.

Key Specifications
Product Type: Frozen Pot Stickers / Spring Rolls
Main Ingredients: Wheat Flour, Vegetables, Chicken, Beef, Pork, Seafood (varies by product)
Processing: Prepared, Filled, Individually Quick Frozen (IQF)
Filling Options: Vegetable, Chicken, Beef, Pork, Shrimp, Mixed
Shape: Roll, Crescent, Customized
Storage Temperature: -18 Degree C or below
Shelf Life: 18 -24 Months
Packaging: Retail and bulk packs available
Cooking Methods: Frying, Baking, Air Frying, Steaming

Frozen Dumplings/Baozi are premium ready-to-cook food products made from high-quality wheat flour and carefully selected fillings such as vegetables, chicken, beef, pork, seafood, or mixed ingredients. Prepared under strict hygienic conditions and Individually Quick Frozen (IQF) to preserve freshness, flavor, and texture, they offer convenience and consistent quality. These products are widely supplied to restaurants, hotels, supermarkets, catering companies, and frozen food distributors, providing authentic taste and long shelf life for domestic and international B2B markets.

Key Specifications
Product Type: Frozen Dumplings / Baozi
Main Ingredients: Wheat Flour, Meat and/or Vegetable Fillings
Processing: Prepared, Steamed (where applicable), Individually Quick Frozen (IQF)
Filling Options: Chicken, Beef, Pork, Seafood, Vegetable, Mixed
Shape: Round, Crescent, Bun (Baozi), Customized
Storage Temperature: -18 Degree C or below
Shelf Life: 18 - 24 Months
Packaging: Retail and bulk packs available

Soybean oil is a fatty oil extracted from the seeds of the legume soybean (Glycine soya Bentham). It is actually a mixture of glycerides of various acids, which are mainly linoleic acid, linolenic acid, oleic acid, palmitic acid, and stearic acid, with other acids present in trace amounts.

[Physical Properties]This product is a pale yellow clear oily liquid; it has a slight special odor and a faint taste. It is miscible with ether, chloro forroleum ether, and is slightly soluble in ethanol. Specific Gravity: The specific gravity (Appendix VI A) of this product shall be 0.915-0.923. Refractive Index: The refractive index (Appendix VI F) of this product shall b 1.472-1.475. Acid Value: It shall not exceed 0.6 (Appendix VII H). Saponification Value: It shall be 18795 (Appendix VII H). Iodine Value: It shall be 108-128 (Appendix VII H).
[Storage]Protect from light, seal, d store in a cool place.
[Chemical Composition] This product is a fatty oil prepared from the germ of Zea mays seeds by the hot pressing method.

Paper cup, paper bowl

Hot paper cup/bowl, cold paper cup & bowl, various capacity is available, 4 oz, 6 oz, 8 oz, 10 oz, 12 oz, 16 oz, 20 oz, etc. Offset printing and flexo-printing are ok.

We can supply single wall paper cup, double wall paper cup, ripple wall paper cup, vending cup,ice cream paper cup, salad bowl, soup cup, popcorn bucket.

Item: Paper Cup Fan, Paper Cup Sheet, Paper Cup Roll
Material: 100 % virgin wood pulp
PE coating: Single PE or Double PE
Printing: Flexo-graphic Printing, Offset Printing
Type: Net fan, Sheet, Roll
Color: Black, Red, White, Yellow or customized as artwork.
Application Area: Family, Office, Party, Meeting, Restaurant, Entertainment, Advertisement, etc.
Size: 2.5 OZ, 3 OZ, 4 OZ, 6 OZ, 7 OZ, 8 OZ, 9 OZ, 10 OZ, 12 OZ, 16 OZ, 20 OZ, 24 OZ or customized.
Feature: Disposable, Eco Friendly, Biodegradable, waterproof, economic.
Purpose: Disposable Paper Cup, for coffee, milk, tea, water, ice cream, fruit juice, etc.

Item: PE Coated Paper Cup Stock, Raw Material Roll, Paper Cup Bottom Roll, Paper Cup Paper
Material: 100 % virgin wood pulp
PE coating: Single PE or Double PE
Printing: Flexo-graphic Printing, Offset Printing or without
Color: Black, Red, White, Yellow or customized as artwork.
Application Area: Family, Office, Party, Meeting, Restaurant, Entertainment, Advertisement, etc.
Feature: Disposable, Eco Friendly, Biodegradable, waterproof, economic.
Purpose: Disposable Paper Cup, for coffee, milk, tea, water, ice cream, fruit juice, etc.
Place of Origin: China

Stabilizer; Thickener; Emulsifier; Dispersant; Gelling Agent; Coating Agent; Suspending Agent. It is used in ice cream and cold spots in Japan to improve the shape retention and make the tissue fine. The dosage is 0.1% to 0.4%. When making fillings, it can impart cohesiveness, and its dosage is 0.1% to 0.7%. Because it is a hydrophilic polymer, it has strong hydration properties, which makes it difficult to form ice crystals from the water absorbed by the stabilizer.

Used in the United States for pie fillings, meat sauces, gravy, frozen foods, chocolate, butter flavored hard candy, cold spot gels, jelly gums, syrups, emulsions, etc. The dosage is 0.1%~ 0.5%. In beer production, it is used as a solidification remover of copper, and at the same time it is removed after agglomeration together with protein and tannin. It can be made into film for anti-sticking packaging of candy.

CETEARYL ALCOHOL cas 67762-27-0 Basic information:
Cetearyl alcohol is a white granular or flake solid with special smell. Insoluble in water, soluble in ethanol, ether, and other organic solvents, with the universality of alcohols.
Cetearyl alcohol is obtained from esterification, hydrogenation and fractionation of natural oils. Fatty alcohols are used in cosmetics, plastics, leather, textile, synthetic detergents and other industries. They are suitable for all kinds of cosmetics, and are especially suitable for cream and lotion. Cetearyl alcohol in medicine can be directly used in w / O emulsifier, cream, ointment matrix, hair care and skin care. Cetearyl alcohol also used as raw material of textile auxiliaries in industry.

Commodity: Sodium Hydrosulfite
Other name: Synonyms: Sodium Hydrosulphite; Sodium Dithionite; Dithionous acid, Disodium salt; Sodium Sulfoxylate
CAS No.: 7775-14-6
Molecular Weight: 174.10
Chemical Formula: Na2S2O4

Product Description
Appearance: White, crystalline powder.

Product Feature
Odor: Slight irritative.
Specific Gravity: Unavailable
Solubility: Soluble in water.
Density: 2.19
pH: 6-7
pH Test-Method: PH test paper.
% Volatiles by volume @ 21C (70F): 0
Boiling Point: Not applicable.
Melting Point: >300 C Decomposes.
Vapor Pressure (mm Hg): No information found.
Bulk Density: ~0.9
Evaporation Rate (BuAc=1): No information found.

Application
1. Widely used in textile industry for vat dyeing, reduction cleaning, printing and stripping, textile textile bleaching .
2. bleaching paper pulps , especially mechanical pulps, its the most fittable bleaching agent in pulps.
3. bleaching kaolin clay, fur bleaching and reductive whitening, bleaching of bamboo products and straw products,
4. in mineral, the compound of thiourea and other sulphides.
5. as reducing agent in chemical industry.
6. Sodium hydrosulfite food additive grade is used in foodstuffs, as bleaching agent and preservative dried fruits, dried vegetable, vermicelli, glucose, sugar, rock sugar, caramel, candy, liquid glucose, bamboo shoots, mushrooms and canned mushrooms.

Packaging 50kg/100kg net in iron drums with double PVC bags

Product Specification/Models
NDEX 90%, 88%, 85%. FOOD ADDITIVE
Na2S2O4, 90%, 88%, 85%, Fe 20ppm ZincZnOther heavy metal
calculated as Pb, 1ppm
Water Insolubles05%
Shelf Life(month)12

Commodity: Sodium Metabisulphite
Molecular formula:Na2S2O5
Molecule Weight:190.10
H.S code:28321000
CAS:7681-57-4

Product Features
Appearance : White Or Light Yellow Crystal Powder
Odour: Sulfur Dioxide
Taste : Salty
Melting Poing : 150
Specific Density1.48
Ph : 4.0-4.6
Solubility : Soluble In Water ,insoluble In Alcohol

Application:
1. For industry
Mordant of printing and dyeing; Dechlorinate of textile after bleaching;
Sulphonated agent and reducer of chemical industry and pharmacy;
Bleach of paper pulp, bamboo and timber bleach of stapk; Treatment agent of waste water; Rubber solidifying agent ;Perfume industry is served as hydrocarbon perfume aldehyde ;
The hide profession employ to do to molt dose and pliable dose and wearproof dose ,The sensitize industry is served as the developing agent reductant and the protection of fixing bath dose and so on; sewage treatment.
2.For food additive
Bleach agent (e.g.candies, cake, bamboo shoots, etc);Loose agent (e.g.bread, cracker etc);Antiseptic and germicide (e.g.fruit juice, tinned foodbrews, the cereals food is defended storage etc);Inhibitor and freshen agent (e.g.day lily, seafood, fruit and vegetable etc)

Specifications:
Na2S2O5 97% min
SO2 65% min
Fe 0.0015% max
water-Insoluble 0.01% max
As 0.0001% max
PH 4.0-4.6

Packing and Storage
Knitted bags lined polyethylene plastic bags double packaging, Weighing 25Kg/50KG/1000Kg/1200kg. Transportation-and harsh rain. Stored in a cool, ventilated, dry place.

Model: Monaco 3S

Technical Specifications:
1. Dimensions: Height 575mm / width 450mm / depth 280mm
2. Net Weight: 22kg
3. Electrical Supply: 220V-240V / 110V-120V 50Hz / 60Hz
4. Power Supply: 2.5kw
5. Water Supply: Both internal and external connection of water supply
Fitting connection: 3/4"
6. User Interface: 5 selection push buttons offer diversified drink, potato slush and hot water
7. Canisters: 2S version: 2 instant canisters of which 2 double
3S version: 3 instant canisters of which 1 double

Choice devices:
1. Base cabinet (height: 920mm) for purified water barrel and disposable paper cups.
2. Water pump is available for purified water barrel.
3. External programmer.

Taian Henson Metal Co lTD 420J2 Stainless Steel Strip For Razor Blade
201 j3 stainless steel strip
CR Stainless Steel Coil Stainless Steel Strip
201 stainless steel strip price
Sus ss420 420j1 ss420j2 stainless steel strip
ASTM SS 201 202 301 304 304L 309S 316 316L 409L 410S 410 420J2 430 440 Stainless Steel Strips/band/Belt/Coil
Factory Price 420j1 420j2 Stainless Steel Coil Strip Factory In Stock For Sale
420J2 1mm Thickness Stainless Steel Strip
Bright Mirror Finished Surface 420j2 Stainless Steel Coil/Sheet/Strip for Blade Razor
Modified 420 420J2 Stainless Steel Divider Strip For HDD Components
Stainless Steel strap02mm 4mm Thick 14404 420j2 309s Brush BA Price Stainless Steel Strip For Razor Blade 401 406 410 420J2 good price
ASTM 201 202 301 302 304 304L 309S 316 316L 2304 254Mo 409L 410S 410 420J2 430 440 Stainless Steel Strips/band/Belt/Coil

Taian Henson Metal Co lTD 420J2 Stainless Steel Strip For Razor Blade
201 j3 stainless steel strip
CR Stainless Steel Coil Stainless Steel Strip
201 stainless steel strip price
Sus ss420 420j1 ss420j2 stainless steel strip
ASTM SS 201 202 301 304 304L 309S 316 316L 409L 410S 410 420J2 430 440 Stainless Steel Strips/band/Belt/Coil
Factory Price 420j1 420j2 Stainless Steel Coil Strip Factory In Stock For Sale
420J2 1mm Thickness Stainless Steel Strip
Bright Mirror Finished Surface 420j2 Stainless Steel Coil/Sheet/Strip for Blade Razor
Modified 420 420J2 Stainless Steel Divider Strip For HDD Components
Stainless Steel strap02mm 4mm Thick 14404 420j2 309s Brush BA Price Stainless Steel Strip For Razor Blade 401 406 410 420J2 good price
ASTM 201 202 301 302 304 304L 309S 316 316L 2304 254Mo 409L 410S 410 420J2 430 440 Stainless Steel Strips/band/Belt/Coil

Taian Henson Metal Co lTD 420J2 Stainless Steel Strip For Razor Blade
201 j3 stainless steel strip
CR Stainless Steel Coil Stainless Steel Strip
201 stainless steel strip price
Sus ss420 420j1 ss420j2 stainless steel strip
ASTM SS 201 202 301 304 304L 309S 316 316L 409L 410S 410 420J2 430 440 Stainless Steel Strips/band/Belt/Coil
Factory Price 420j1 420j2 Stainless Steel Coil Strip Factory In Stock For Sale
420J2 1mm Thickness Stainless Steel Strip
Bright Mirror Finished Surface 420j2 Stainless Steel Coil/Sheet/Strip for Blade Razor
Modified 420 420J2 Stainless Steel Divider Strip For HDD Components
Stainless Steel strap02mm 4mm Thick 14404 420j2 309s Brush BA Price Stainless Steel Strip For Razor Blade 401 406 410 420J2 good price
ASTM 201 202 301 302 304 304L 309S 316 316L 2304 254Mo 409L 410S 410 420J2 430 440 Stainless Steel Strips/band/Belt/Coil

Avobenzone is an oil-soluble ingredient used in sunscreen products to absorb the full spectrum of UVA rays.Avobenzone was patented in 1973 and was approved in the EU in 1978. Its use is approved worldwide.
Pure avobenzone is a whitish to yellowish crystalline powder with a weak odor, dissolving in isopropanol, dimethyl sulfoxide, decyl oleate, capric acid/caprylic, triglycerides and other oils. It is not soluble in water.

Avobenzone absorbs both UV-(380-315 nm that is associated with long term skin damage) and UV-B (315-280 nm that causes sunburn) rays. Avobenzone is known as one of the most effective sunscreen ingredients.

Product Name: Isopropyl myristate
Synonyms: Isopropyl Myristate, 96% 25GR; IPM 100; IPM-EX; IPM-R; Radia 7730 (IPM); Isopropyl myristate Vetec(TM) reagent grade, 98%; MYRISTIC ACID ISOPROPYL ESTER MINIMU; ISO-PROPYL N-TETRADECANOATE
CAS: 110-27-0
MF: C17H34O2
MW: 270.45
EINECS: 203-751-4
Melting point ~3 �°C (lit.)
Boiling point 193 �°C/20 mmHg (lit.)
density 0.85 g/mL at 25 �°C (lit.)
vapor pressure <1 hPa (20 �°C)
FEMA 3556 | ISOPROPYL MYRISTATE
refractive index n20/D 1.434(lit.)
Fp >230 �°F
storage temp. 2-8�°C
solubility <0.05mg/l
form Liquid
Specific Gravity 0.855 (20/4�ºC)
color Clear
Odor odorless


Application

Isopropyl myristate (IPM) is a fatty acid ester which is used as solvent in water-in-oil emulsion, oils and fatty based ointments. The use of IPM is recommended in the Sterility Test chapter of the European, Japanese and United States Pharmacopoeia (EP, 2.6.13, JP, 4.06 and USP, 71) as diluent for oils and oily solutions, as well as for ointments and creams. Indeed, its solvent properties improve the filterability of these samples.
Isopropyl myristate is known as a penetration enhancer for topical preparations. It is a water clear, low viscous oily liquid with a very good spreading capacity on the skin. Isopropyl Myristate is mainly used in cosmetics as an oil component for emulsions, bath oils and as a solvent for active substances.

4-Chloro-3,5-dimethyl is a white crystalline powder. Melting point 115-116 C, boiling point 246 C. At 20 C, 1g can be dissolved in 3L water, 1 part of 95% alcohol, ether, benzene, terpenes, non-volatile oils. It has a slight smell and can volatilize with water vapor. Stable in hot water.

1. Used as a paper sizing agent in the papermaking industry to enhance the water resistance and impermeability of paper;
2. After being dissolved in water, it can cause small particles and natural colloidal particles in the water to condense into
large flocs, which can be removed from the water. Therefore, it is used as a coagulant for water supply and wastewater;
3. Used as a turbid water purifier, as well as a precipitator, color fixative, filler, etc. Used as a raw material (astringent)
for anti sweat cosmetics in cosmetics;
4. In the fire protection industry, foam extinguishing agent is composed of baking soda and foaming agent;
5. Analytical reagent, mordant, tanning agent, oil decolorizing agent, wood preservative;
6. Stabilizers for albumin pasteurization (including liquid or frozen whole eggs, protein or egg yolk);
7. It can be used as raw material to produce artificial gemstones, high-grade ammonium alum and other aluminate;
8. In the fuel industry, it serves as a precipitator in the production of chrome yellow and lake dyes, while also serving as afixing and filling agent.

About uses of Monel400 alloy: various heat exchange equipment, boiler feed water heaters, pipelines, containers, pumps, valves, shafts, etc. in petroleum and chemical processing, seawater desalination equipment, salt production equipment, propeller shafts, gasoline and water tanks, etc.


Name

MONEL400 Stainless Steel Coil

Standard

JIS, AISI, ASTM, GB, DIN, EN, BS

Material

MONEL400

Surface Treatment

BA/2B/NO.1/NO.4/4K/HL/8K/EMBOSSED or according to customer requirements,etc.

Width

100mm-2500mm or as required

Thickness

0.1mm-12mm or as required

Length

As customer's request

Inspection

Fully accept all the third party to test before shipment.

Packing

Standard Export Seaworthy Package.Suit for all kinds of transport,or as required.

Payment Terms

L/C, T/T ETC.



Stainless steel coils are imported and domestic products, divided into hot-rolled and cold-rolled. According to the needs of different users, we can also order a variety of special-shaped steel materials.In order to ensure that the yield strength, tensile strength, elongation and hardness of various stainless steel coils meet the requirements, the stainless steel coils must undergo heat treatment such as annealing, solution treatment, and aging treatment before delivery.

Warehouse Storage

Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project.

Name

Stainless Steel Coil

Standard

JIS, AISI, ASTM, GB, DIN, EN, BS

Material

201, 301 304L, 309S, 316L 310S 321 410, 430 2205 , 2507 , 904L , INCOLOY Alloy , HASTELLOY MONEL etc.

Surface Treatment

BA/2B/NO.1/NO.4/4K/HL/8K/EMBOSSED or according to customer requirementg,etc.

Width

100mm-2500mm or as required

Thickness

0.1mm-12mm or as required

Length

As customer's request

Inspection

Fully accept all the third party to test before shipment.

Packing

Standard Export Seaworthy Package.Suit for all kinds of transport,or as required.

Payment Terms

L/C, T/T ETC.



Stainless steel coils are imported and domestic products, divided into hot-rolled and cold-rolled. According to the needs of different users, we can also order a variety of special-shaped steel materials.In order to ensure that the yield strength, tensile strength, elongation and hardness of various stainless steel coils meet the requirements, the stainless steel coils must undergo heat treatment such as annealing, solution treatment, and aging treatment before delivery

Warehouse Storage

Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project.

430 stainless steel coil is used for building decoration, fuel burner parts, household appliances and household appliances. 430F is a steel with free cutting property added to 430 steel, mainly used for automatic lathes, bolts and nuts. 430LX adds Ti or Nb to 430 steel to reduce the content of C, which improves the processability and welding performance. It is mainly used in hot water tanks, hot water supply systems, sanitary appliances, household durable appliances, bicycle flywheels, etc.

Name

430 Stainless Steel Coil

Standard

JIS, AiSi, ASTM, GB, DIN, EN

Material

430

Surface Treatment

BA/2B/NO.1/NO.4/4K/HL/8K/EMBOSSED or according to customer requirements,etc.

Width

100mm-2500mm or as required

Thickness

0.1mm-4mm or as required

Length

As customer's request

Inspection

Fully accept all the third party to test before shipment.

Packing

Standard Export Seaworthy Package.Suit for all kinds of transport,or as required.

Payment Terms

L/C, T/T



Stainless steel coil is a thin steel plate supplied in coils, also called strip steel. There are imported and domestic products, divided into hot-rolled and cold-rolled. According to the needs of different users, we can also order a variety of special-shaped steel materials.In order to ensure that the yield strength, tensile strength, elongation and hardness of various stainless steel coils meet the requirements, the stainless steel coils must undergo heat treatment such as annealing, solution treatment, and aging treatment before delivery.

304L stainless steel coil is mainly used in automobile accessories, hardware tools, tableware, cabinets, medical appliances, office equipment, weaving, handicrafts, petroleum, electronics, chemicals, textile, food, machinery, construction, nuclear power, aerospace, military and other industries.


Name

304L Stainless Steel Coil

Standard

JIS, AiSi, ASTM, GB, DIN, EN

Material

304L

Surface Treatment

BA/2B/NO.1/NO.4/4K/HL/8K/EMBOSSED or according to customer requirements,etc.

Width

100mm-2500mm or as required

Thickness

0.1mm-4mm or as required

Length

As customer's request

Inspection

Fully accept all the third party to test before shipment.

Packing

Standard Export Seaworthy Package.Suit for all kinds of transport,or as required.

Payment Terms

L/C, T/T ETC.



Stainless steel coil is a thin steel plate supplied in coils, also called strip steel. There are imported and domestic products, divided into hot-rolled and cold-rolled. According to the needs of different users, we can also order a variety of special-shaped steel materials.In order to ensure that the yield strength, tensile strength, elongation and hardness of various stainless steel coils meet the requirements, the stainless steel coils must undergo heat treatment such as annealing, solution treatment, and aging treatment before delivery.

Packing and shipping

Our products are exported to multiple overseas countries and regions such as Europe, America, South Asia, Southeast Asia, Africa, and Latin America, and have won the trust and support of customers with excellent quality and service.
During the supply process, the company can timely use sufficient funds to adjust the production variety and model of the steel plant, ensuring the use needs during the peak construction period.

310S stainless steel coil is widely used in kiln, high-temperature furnace, boiler, furnace liner high-temperature equipment, such as kiln car, boiler liner, high-temperature furnace, high-temperature furnace tube, combustion machine liner, etc. It can be used for high-temperature equipment. The product is resistant to high temperature and heat. 310s stainless steel plate has good creep strength and can work continuously under high temperature. The working temperature of 310S stainless steel is 1200, and it can work continuously at 1100. It is mainly used to manufacture high temperature exhaust pipe, high temperature furnace, high temperature furnace liner, crematory furnace and other steel grades requiring heat resistance, as well as high temperature and high temperature contact parts.



Name

310S Stainless Steel Coil

Standard

JIS, AiSi, ASTM, GB, DIN, EN

Material

310S

Surface Treatment

BA/2B/NO.1/NO.4/4K/HL/8K/EMBOSSED or according to customer requirements,etc.

Width

100mm-2500mm or as required

Thickness

0.1mm-4mm or as required

Length

As customer's request

Inspection

Fully accept all the third party to test before shipment.

Packing

Standard Export Seaworthy Package.Suit for all kinds of transport,or as required.

Payment Terms

L/C, T/T ETC.


Stainless steel coil is a thin steel plate supplied in coils, also called strip steel. There are imported and domestic products, divided into hot-rolled and cold-rolled. According to the needs of different users, we can also order a variety of special-shaped steel materials.In order to ensure that the yield strength, tensile strength, elongation and hardness of various stainless steel coils meet the requirements, the stainless steel coils must undergo heat treatment such as annealing, solution treatment, and aging treatment before delivery

Use of 2205 stainless steel coil: 1. The heater is generally used in the oil refining unit; 2. Chemical plant equipment pipeline; 3. Fast cooling cylinder for solid solution used in textile industry; 4. Seamless steel pipe for heat exchanger and condenser. 5. High pressure seamless steel pipe for food (gb-2000) is a high-quality carbon structural steel and alloy steel seamless steel pipe suitable for chemical equipment and pipes with working temperature of - 40~400 C and working pressure of 10~30ma. 6. Seamless steel pipes for geological drilling and oil drilling control. 7. Cracking pipe for petrochemical industry is used to transport high-temperature and high-pressure fluid on fertilizer equipment.


Name

2205 Stainless Steel Coil

Standard

JIS, AISI, ASTM, GB, DIN, EN, BS

Material

2205

Surface Treatment

BA/2B/NO.1/NO.4/4K/HL/8K/EMBOSSED or according to customer requirements,etc.

Width

100mm-2500mm or as required

Thickness

0.1mm-12mm or as required

Length

As customer's request

Inspection

Fully accept all the third party to test before shipment.

Packing

Standard Export Seaworthy Package.Suit for all kinds of transport,or as required.

Payment Terms

L/C, T/T ETC.





Stainless steel coils are imported and domestic products, divided into hot-rolled and cold-rolled. According to the needs of different users, we can also order a variety of special-shaped steel materials.In order to ensure that the yield strength, tensile strength, elongation and hardness of various stainless steel coils meet the requirements, the stainless steel coils must undergo heat treatment such as annealing, solution treatment, and aging treatment before delivery.

2507 stainless steel coil is used in oil and natural gas industry; Offshore stone skyshatter oil platform (heat exchanger pipe, water treatment and water supply system, fire protection system, water spraying system, water stabilization system; petrochemical equipment; desalination (desalination) equipment (and high-pressure pipe and seawater pipe in the equipment). Mechanical and structural components that require both high strength and high corrosion resistance: fuel (waste) gas purification equipment.



Name

2507 Stainless Steel Coil

Standard

JIS, AISI, ASTM, GB, DIN, EN, BS

Material

2507

Surface Treatment

BA/2B/NO.1/NO.4/4K/HL/8K/EMBOSSED or according to customer requirementg,etc.

Width

100mm-2500mm or as required

Thickness

0.1mm-12mm or as required

Length

As customer's request

Inspection

Fully accept all the third party to test before shipment.

Packing

Standard Export Seaworthy Package.Suit for all kinds of transport,or as required.

Payment Terms

L/C, T/T ETC.



Stainless steel coils are imported and domestic products, divided into hot-rolled and cold-rolled. According to the needs of different users, we can also order a variety of special-shaped steel materials.In order to ensure that the yield strength, tensile strength, elongation and hardness of various stainless steel coils meet the requirements, the stainless steel coils must undergo heat treatment such as annealing, solution treatment, and aging treatment before delivery

Warehouse Storage

Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project.

201 stainless steel coil is mainly used for decorative tubes, industrial tubes and some shallow stretched products.



Name

201 Stainless Steel Coil

Standard

JIS, AiSi, ASTM, GB, DIN, EN

Material

201

Surface Treatment

BA/2B/NO.1/NO.4/4K/HL/8K/EMBOSSED or according to customer requirementg,etc.

Width

100mm-2500mm or as required

Thickness

0.1mm-4mm or as required

Length

As customer's request

Inspection

Fully accept all the third party to test before shipment.

Packing

Standard Export Seaworthy Package.Suit for all kinds of transport,or as required.

Payment Terms

L/C, T/T ETC.



Stainless steel coil is a thin steel plate supplied in coils, also called strip steel. There are imported and domestic products, divided into hot-rolled and cold-rolled. According to the needs of different users, we can also order a variety of special-shaped steel materials.In order to ensure that the yield strength, tensile strength, elongation and hardness of various stainless steel coils meet the requirements, the stainless steel coils must undergo heat treatment such as annealing, solution treatment, and aging treatment before delivery.

Warehouse Storage

Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project

Hastelloy C-276 alloy is one of the few materials that can be used in hot concentrated sulfuric acid solution It is mainly resistant to wet chlorine, various oxidizing chlorides, chloride solutions, sulfuric acid and oxidizing salts, and has good corrosion resistance at low and medium temperatures. Therefore, in the past 30 years, it has been widely used in harsh corrosive environments, such as chemical industry, petrochemical industry, flue gas desulfurization, pulp and paper making, environmental protection and other industrial fields.



Name

Hastelloy C-276 Stainless Steel Coil

Standard

JIS, AISI, ASTM, GB, DIN, EN, BS

Material

Hastelloy C-276

Surface Treatment

BA/2B/NO.1/NO.4/4K/HL/8K/EMBOSSED or according to customer requirements,etc.

Width

100mm-2500mm or as required

Thickness

0.1mm-12mm or as required

Length

As customer's request

Inspection

Fully accept all the third party to test before shipment.

Packing

Standard Export Seaworthy Package.Suit for all kinds of transport,or as required.

Payment Terms

L/C, T/T ETC.



Stainless steel coils are imported and domestic products, divided into hot-rolled and cold-rolled. According to the needs of different users, we can also order a variety of special-shaped steel materials.In order to ensure that the yield strength, tensile strength, elongation and hardness of various stainless steel coils meet the requirements, the stainless steel coils must undergo heat treatment such as annealing, solution treatment, and aging treatment before delivery

904L stainless steel coil (super austenitic stainless steel) is a high alloyed austenitic stainless steel with very low carbon content. It has good corrosion resistance in dilute sulfuric acid and is specially designed for environments with severe corrosion conditions. It has high chromium content and sufficient nickel content. The addition of copper makes it have strong acid resistance, especially high resistance to chloride interstitial corrosion and stress corrosion cracking. It is not easy to appear corrosion spots and cracks. Its pitting resistance is slightly better than that of other steels. It has good processability and weldability, and can be used for pressure vessels.


Name

904L Stainless Steel Coil

Standard

JIS, AiSi, ASTM, GB, DIN, EN

Material

904L

Surface Treatment

BA/2B/NO.1/NO.4/4K/HL/8K/EMBOSSED or according to customer requirementg,etc.

Width

100mm-2500mm or as required

Thickness

0.1mm-4mm or as required

Length

As customer's request

Inspection

Fully accept all the third party to test before shipment.

Packing

Standard Export Seaworthy Package.Suit for all kinds of transport,or as required.

Payment Terms

L/C, T/T ETC.



Stainless steel coil is a thin steel plate supplied in coils, also called strip steel. There are imported and domestic products, divided into hot-rolled and cold-rolled. According to the needs of different users, we can also order a variety of special-shaped steel materials.In order to ensure that the yield strength, tensile strength, elongation and hardness of various stainless steel coils meet the requirements, the stainless steel coils must undergo heat treatment such as annealing, solution treatment, and aging treatment before delivery.

Warehouse Storage

Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project.

Packing and shipping

Our products are exported to multiple overseas countries and regions such as Europe, America, South Asia, Southeast Asia, Africa, and Latin America, and have won the trust and support of customers with excellent quality and service.
During the supply process, the company can timely use sufficient funds to adjust the production variety and model of the steel plant, ensuring the use needs during the peak construction period.

316L stainless steel coil is commonly used in pulp and paper making equipment, heat exchanger, dyeing equipment, film processing equipment, pipes, materials used for the exterior of buildings in coastal areas, as well as watch chains and case of advanced watches.

Name

316L Stainless Steel Coil

Standard

JIS, AiSi, ASTM, GB, DIN, EN

Material

316L

Surface Treatment

BA/2B/NO.1/NO.4/4K/HL/8K/EMBOSSED or according to customer requirements,etc.

Width

100mm-2500mm or as required

Thickness

0.1mm-4mm or as required

Length

As customer's request

Inspection

Fully accept all the third party to test before shipment.

Packing

Standard Export Seaworthy Package.Suit for all kinds of transport,or as required.

Payment Terms

L/C, T/T ETC.



Stainless steel strip is a thin steel plate supplied in coils, also called strip steel. There are imported and domestic products, divided into hot-rolled and cold-rolled. According to the needs of different users, we can also order a variety of special-shaped steel materials.In order to ensure that the yield strength, tensile strength, elongation and hardness of various stainless steel coils meet the requirements, the stainless steel coils must undergo heat treatment such as annealing, solution treatment, and aging treatment before delivery

Eucalyptus oil is one of the most commonly used essential oils. With the growing popularity of sweets and chewing gum, one of the main uses of eucalyptus oil is as a food additive. The new influence and clean appeal of synthetic fragrances has had a great impact on the cosmetics industry (such as toothpaste and oral cleaning products) and other household cleaning products, as well as the fragrance of perfumes. Eucalyptus oil is also used in the pharmaceutical industry as an antibacterial agent, especially in the treatment of respiratory infections and other similar diseases.

Cleaned and selected bulk material, suitable for roasting (snack processing) and sunflower oil extraction.
Stable quality with uniform size and natural color.
TKW 180g-220g(or over 200g for the finest)

Uniformity rate: over 90% of kernels fall within the same size grade, ensuring a consistent and premium look
, plumpness rate> 95%
broken rate: 1.5 %
moisture content 8-10%
Color Contrast: Distinct Black and white stripes with a bright, glossy appearance

Thickness Tolerance+/-0.01mm
Width Tolerance+/-0.05mm
Surface nature, blue, yellow, white, polished, white polished, bright, black
Coils weight as your request
MOQ 1 Ton
Monthly capacity 500 Tons
Package Standard Seaworthy Package
Payment L/C, Western Union, D/P, D/A, T/T, Trade assurance
Application
band saw blade, rolling shutter spring, bricklayer trowel, plaster trowel, putty knives, scraper, power trowel blade, lawn trowel
blade, shoe insole, flat spring, toy spring, spring baskets etc.

Caprylic acid/capric acid triglycerides are clear to light yellow, high clarity and odorless oils, and are derivatives of palm oil or coconut oil. Widely used in industries such as food, medicine, and cosmetics, it can be used as a base material for moisturizing factors, a stabilizer for cosmetics, an antifreeze, and a homogenizer.

tert-Butylhydroquinone(TBHQ) CAS1948-33-0


TBHQ Mainly used as inhibiter for polyvinyl chloride. In food industry it is used as antioxidation for vegetable oil and fat, roasted food, fried food and meat products. It also used as stabilizer for insecticide, as well as intermediate for dye and pharmaceutical.

Tertiary Butyl Hydroquinone (TBHQ) is the synthetic food grade antioxidant, used in stabilizing various vegetable oils, fats and food against oxidative deterioration, thus retarding development of rancidity in these products and extending their storage life.

INCI: Alkyl Acrylate Crosspolymer Carbomer Carbopol N2

Description: Multi-functional emulsifier, capable of stabilizing and thickening emulsions even at low dosage, Cold process, No need to calculate the HLB value. It can emulsify silicone to create semi-transparent cream. Provides moisturizing and weightless sensory for cream.
High viscosity formulation: THEMAX N1
Low viscosity formulation: THEMAX N2
Recommend Dosage: 0.1-0.4%
Features:
Emulsify a variety of oils and grease
Excellent emulsion stability
Suitable for a cold mix process