Find Verified Temperature Scanners Suppliers, Manufacturers and Wholesalers

Zinc is a bluish-white, lustrous metal. It is brittle at ambient temperatures but is
malleable at 100 to 150C. It is a reasonable conductor of electricity, and burns in air
at high red heat with evolution of white clouds of the oxide. Plating thin layers of zinc
on to iron or steel is known as galvanizing and helps to protect the iron from corrosion.

Zinc Ash - Zn min. 62%
Packing: 1MT Jumbo bags or loose into container
Inspection: 3rd party at loading (SGS/ CCIC)

Please contact for more info.

Quick details:
Place of origin: baku, azerbaijan
Material: hdpe
Thickness: 2.7-12.5 mm
Item: three-layer fiber glass pprc
Rating: ip65
Certification: iso9001
Color: white
Standard: ohsas 18001
Specification: as your requirement
Od: 16-75 mm
Length: as your requirement
Packaging & delivery:
Depends on your order.
Description:
Pipes made of “random polypropylene” are widely used in modern life. Being light and very durable, this thermoplastic is resistant to solvents, acids and alkali. Pipes made of this material are used at temperatures from -40°? to +95°?. Elasticity of pipe prevents crack formation, when water is frozen inside. We use high quality polypropylene from known manufacturers, such as sabic etc.In the production of fiber pipes.These pipes are produced in the equipments of well-known german companies. We offer to our customers high quality pipes with reasonable prices.
Advantages of pipes:
• Quality: raw materials used in our factory are mostly produced in europe and correspond the requirements of din, tse, iso 9001 standards.
• Reliability: systems assembled from these pipes have high temperature and pressure resistance.
• Pipes service life: garantee of these pipes is 50 years and it can be changed depending on used temperature.
• Corrosion and chemical resistance: pipes are corrosion and aggressive environment resistant.
• Flow rate: due to the smooth inner surface these pipes has increased flow rates
• Ecological cleanness: operation polypropylene does not enter into the reaction with water, thereby does not add foreign flavor to water. Its inner surface is lubricous, therefore, formation of bacteria, organic and non-organic sludge is not observed.
• Durability: middle layer of high temperature linear expansion of fiberglass prevents pipe bending and significantly increases pressure resistance.

Quick details:
Place of origin: baku, azerbaijan
Material: hdpe
Thickness: 1.9-15 mm
Item: polypropylene ppr pipesprotection rating: ip65
Certification: iso9001
Color: white
Standard: ohsas 18001
Specification: as your requirement
Od: 20-90.0 mm
Type: pn-10, 16, 20
Length: as your requirement
Packaging & delivery:
Depends on your order.
Description:
Advantages of pipes:
• Quality: raw materials used in our factory are mostly produced in europe and correspond the requirements of din, tse, iso 9001 standards.
• Reliability: systems assembled from these pipes have high temperature and pressure resistance.
• Pipes service life: garantee of these pipes is 50 years and it can be changed depending on used temperature.
• Corrosion and chemical resistance: pipes are corrosion and aggressive environment resistant.
• Flow rate: due to the smooth inner surface these pipes has increased flow rates
• Ecological cleanness: operation polypropylene does not enter into the reaction with water, thereby does not add foreign flavor to water. Its inner surface is lubricous, therefore, formation of bacteria, organic and non-organic sludge is not observed.

Due to its special thermal treatment, tempered glass boasts higher impact strength and freeze-thaw resistance compared to regular glass. All tempered glasses are subject to mandatory edge pre-treatment. If broken, such glass falls apart to small fragments with uncut edges.

The glass tempering has the following effects::

impact strength rises 5-10 fold
flexing strength rises 2-3 fold
operating temperature range increases to -150 to +300°C
The tempered glass has quite a broad range of applications: glass panes, multilayer glasses with different properties, all-glass partitions, staircases, stairs, hand rails, car windows etc. The tempered glass can withstand hard blows perpendicular to its plane. Despite its improved properties, however, tempered glass is still a fragile material. It is especially susceptible to end loads, so such glass should be installed with extreme care.

Coolant - antifreeze KL-A40M" intend for using in cooling system of petrol engine and diesel engine internalcombustion engine of all types vehicle. It is preserve necessary for operating envelope of temperature from 400C to + 1100C. Coolant - KL-A40M characterized by high performance attributes and represents optimal composition first-class monoetylenglikol highpurity, demineralized water and by unique complex anti-foam additives and additives-inhibitors, which averted rust formation and metal corrosion (copper, steel, aluminium, cast iron, brass, solder). High-efficient additives antifreeze parcel KL-A40M provides cooling system protection from incrustation, corrosion, heightened depreciation, cavitation, prevent from rubber swelling. Product not carries phosphates, amines, nitrites.

Quick details:
Place of Origin: Baku,Azerbaijan
Specification: Depends on your requirement
Size: Depends on your requirement
Model Number: HDPE
Thickness: Depends on your requirement
Color: Black
Material: PE
Standard: OHSAS 18 001
Types: Elbows 30-45-60-90 dgr.,T-Joints 90 dgr.,Cross T,Y Pieces 45-60 dgr.
Packaging & delivery:
Depends on your order.
Description:
PE 100 brand welded polyethylene fittings are adaptor fittings for PE100 high-density polyethylene pipes. These fittings are manufactured by connecting pipe sections by welding. Released PE 100 brand welded polyethylene fittings have the following configurations and types: 15°, 30°, 45°, 60° and 90°. These fittings are designed for pipe connections at the areas, where pipeline directions (turns and branches) and diameter change.
PE 100 brand welded polyethylene fittings are connected to pipes by exactly lining-up and welding ends with the help of a special welding set.
PE 100 brand welded polyethylene fittings have increased chemical resistance, temperature changes and deformations. These fittings are not subjected to oxidation, and do not decompose for a long time. Operating life of these PE 100 brand welded polyethylene fittings is 50 years which ensures long-term, continuous use of your pipes.

Quick details:
Place of Origin: Baku,Azerbaijan
Specification: Depends on your requirement
Size: Depends on your requirement
Model Number: HDPE
Thickness: Depends on your requirement
Color: Black,White
Material: PE
Standard: OHSAS 18 001
Types: Elbows 45,90 dgr., Tee T-Joints 90 dgr., Tee Reducing T-Joints 90 dgr., Pipe Caps, Reducing couplings, Flange Adaptor.
Packaging & delivery:
Depends on your order.

Description:

Cast fittings - pipe fittings are manufactured by molding of polyethylene (PE100) under pressure and temperature. Cast fittings are used in cases when you want to change the direction of tubing, tee off, or switch to a different diameter. A significant advantage of cast fittings is their relatively low cost associated with the ease of manufacture. Installation is carried out by butt welding, which reduces the financial costs because practically no consumables required at the same time relatively simple installation. Elbows, flange bushings, reducers, tees and caps, are used in gas and water pipes made of PE100 from 63 to 315 mm.

Quick details:
Place of origin: Baku,Azerbaijan
Material: HDPE
Thickness: 1.25-7.5mm
Item: Single-Layer Corrugated Pipes
Protection Rating: IP65
Structure: Bellows inside and outside
Certification: ISO9001
Color: Outer wall: red (electricity), blue (telecommunication), black (others). Inner wall: white, yellow
Standard: OHSAS 18001
Specification: AD7.0MM-AD106.0MM
OD: 7.0-106.0mm
Length: As your requirement
Type: Flexible and Durable

Packaging & delivery:
Depends on your order.

Description:
Our polymeric product factory produces new type of single-layer corrugated polyethylene pipes with hard surface and light weight. These pipes ensure safety of power and telecommunication lines.

Single layer corrugated pipes outside have a profile in forms of corrugations. Their inside is tubular hollow channels. The corrugated surface to withstand heavy loads. Single layer corrugated pipes varies with their wall thickness and diametres. The more is the thickness, more durable the pipes are. Higher thickness ones used for installation of pipes under the pouring of concrete, cement screed, or under the ground. Single layer corrugated pipes light series are used in all other cases or during outer installations. Our single layer corrugated pipes are made from HDPE material.

Advantages and properties:
- They do not rot and corrosion;
- Resistant to chemicals;
- Resistant to external loads and shock resistance;
- Waterproof and resistant to moisture;
- Non-conductive, so they eliminate the risk of electric shock if cable damaged;
- They provide protection against mechanical damage;
- Long life of at least 50 years;
- They retain their characteristics and properties during the entire lifetime;
- They have a wide operating temperature range;
- They can be laid open and a closed manner;
- These types of cables are flexible and do not need additional coupling fittings;
- These types of cables equipped with broaching, which simplifies and accelerates the installation of wires and cables;
- For the installation they do not require special skills and special equipment;
- They are lightweight, easy to carry, for loading/unloading, handling and storage;
have a low cost;
- They have environmentally friendly and safe material.
Material HDPE
Application Areas:
1.Protection of high and low-voltage conductors from mechanical impacts
2.Protects environment from aggressive impacts when cabling under ground
3.Concealed mounting inside of concrete and installation
4.Sewage, ground and storm water disposal
Working temperature: From -40ºC till+90ºC
Color: Outer wall: red (electricity), blue (telecommunication), black (others).
Inner wall: white, yellow
Pipe wall color can be changed with the consent of consumer.

Electromechanical console uncoiling machine for rolled metal products with a load capacity of 7 tons (load capacity of 10 tons optional); the uncoiling machine is equipped with sensors that monitor metal loops which are used to coordinate the unwinding speed of the roll with a speed of profiling block. It is the CONSOLE TYPE of an uncoiling machine that allows for an easy change of rolled metal products, which saves up to 30 pct of the time in use;
a rolling mill for profiling (shaping) rolled metal products into suitably shaped (branded) metal profiles;
A stamp device for application of “steps”;
An oil station;
Grooved guillotine shears for the dimensional cutting of tile effect roofing;
A stacker for receiving finished products;
An ACS of the line for specification of the number and the length of received products.

General Specifications:

Installed power of the lines: 14 kW
Rolling speed: from 8 to 12 lin m/min
Accuracy of rolling along the length: ± 2 mm per 6 m
Quantity of reduction mills: from 14 to 17 pieces
Lifting capacity of the uncoiling machine: 7 tons (10 tons)
Attendants: 1 person
Maximum overall dimensions of the used roll:
Width: 1,250 mm;
Outer diameter: 1,600 mm;
Inside diameter: 500…600 mm.
Receiving stacker length: 6 m
Space required to accommodate the manufacture of tile effect roofing (LxWxH): 30,000×10,000×4,000 mm.
Working temperature range for equipment operation: from +2 to +40 o

Quick details:
Place of Origin: Baku,Azerbaijan
Specification: Depends on your requirement
Size: Depends on your requirement
Model Number: HDPE
Thickness: Depends on your requirement
Color: Black,White
Material: PE
Standard: OHSAS 18 001
Packaging & delivery:
Depends on your order.
Description:
Until recently in the construction of sewage wells used only concrete and iron structure. However, it is much better to use plastic manholes.
Plastic wells used in the networks of household, storm sewage and lubricant. Plastic wells are also used for arranging industrial technological channels. Wells provide access to drains, shut-off and control valves and measurement technology. In addition, they can be used as drainage, rain receivers and inspection chambers.
Plastic wells nesomnitelnymi have the following advantages compared to other types of wells (concrete, cast iron, brick)
• a small proportion (compared with concrete)
• easy installation, transportation and storage
• easy maintenance
• long service lines and trouble-free operation
• high impact resistance material
• connection leaks
• resistance to mechanical damage, corrosion resistance
• ductility of the material, its resistance to low temperatures, abrasion, UV radiation.
• resistance to aggressive chemical environments
• blocking leakage of sewage into the soil
• high strength of the well shaft
• lack of height restrictions
• complete sealing of all joints and penetrations
• Products are not afraid of frost and mechanical loads.
Offered by our company options polyethylene manholes are used for a variety of purposes sama, subdivided into:
• Inspection
• Stormwater
• Drainage
• For measuring devices and valves
• In order to establish the electrical, instrumentation and automation
Also polymer wells divided by functionality:
Sight - allowing to carry out maintenance work, which are used in floatable, household and storm water channels.
Heavy - intended to collect rainwater, often with sand trap.
Perepadnaya - allowing you to connect a channel on a mark above the bottom of the tray portion of the well.
Cable plastic well to order - for laying the cabling in the electrical connection.
Distribution of plastic wells - sharing household and sewer racks for several tanks settling.

Quick details:
Place of Origin: Baku,Azerbaijan
Specification: Depends on your requirement
Size: 78*78-325*380
O.D: 50-100 mm
Model Number: HDPE
Thickness: Depends on your requirement
Color: White
Material: PE
Standard: OHSAS 18 001
Types: Clamps,Elbows 45°,Elbows 90°,Couplings, Reducing couplings,T-Joints 45°,T-Joints 90°,Cross T 45°.
Packaging & delivery:
Depends on your order.
Description:
Installation of pipes to the interval sewer network uses from PPH “Homogen polypropylene” fitings .High physical-mechanical properties make these fittings resistant to corrosive environment. These properties can be applied both to internal as well as external surfaces of sewage Fittings. As distinct from PVC Fittings, they have high impact resistance.
Our offers fittings made of PPH for waste piping, which can be applied in construction of buildings, including residential houses, cottages, offices, hospitals, laboratories, industrial establishments, as well as farming industry.
Taking into consideration biological neutrality of material, fittings can also, be used in food manufacturing industry. Sewage fittings and their socket details are made of high quality white or gray colored granulated propylene.
Process of production is carried out in accordance with the requirements of ISO 9001:2000.
Technical parameters:
Polypropylene sewage fittings are 15 – 20 times lighter than similar cast iron fittings. They are resistant to impact of detergent agents and also, there is no need to paint the fittings. Availability of socket helps to connect them easily. Warranty period is over 50 years
• Resistance to hot water flows at +95°C temperature(in some cases even up up to +100°C)
• Resistance to chemicals, agricultural and industrial waste water containing various types of corrosive materials and substances
• Resistance to hydraulic friction
• Leak connections by sealing rubber rings
• Ease of pipes and fittings facilitates transportation and installation work.
• As opposed to metal and PVC pipes, PPR pipes during water flow absorbs sound and vibration
• Condensate does not occur due to the low thermal conductivity on the outer surface of pipe

Quick details:
Place of origin: Baku,Azerbaijan
Material: HDPE
Thickness: 1.8-4.9 mm
Item: Sewage polypropylene pipes PPH
Rating: IP65
Certification: ISO9001
Color: White
Standard: OHSAS 18001
Specification: As your requirement
OD: 50-200 mm
Length: 250-3000 mm
Packaging & delivery:
Depends on your order.
Description:
Pipes made of PPH “homogeneous polypropylene” are used for the construction of internal sewer network. High physical-mechanical properties make these Pipes resistant to corrosive environment. These properties can be applied both to internal as well as external surfaces of sewage Pipes. As distinct from PVC Pipes, they have high impact resistance.Our offers Pipes made of PPH for waste piping, which can be applied in construction of buildings, including residential houses, cottages, offices, hospitals, laboratories, industrial establishments, as well as farming industry.Taking into consideration biological neutrality of material, Pipes can also, be used in food manufacturing industry. Sewage Pipes and their socket details are made of high quality white or gray colored granulated propylene. Process of production is carried out in accordance with the requirements of ISO 9001:2000.
Technical characteristics
Polypropylene sewage Pipes are 15 – 20 times lighter than similar cast iron Pipes. They are resistant to impact of detergent agents and also, there is no need to paint the Pipes. Availability of socket helps to connect them easily. Warranty period is over 50 years.
• Resistance to hot water flows at +95°C temperature(in some cases even up up to +100°C)
• Resistance to chemicals, agricultural and industrial waste water containing various types of corrosive materials and substances
• Resistance to hydraulic friction
• Leak connections by sealing rubber rings
• Ease of pipes and fittings facilitates transportation and installation work.
• As opposed to metal and PVC pipes, PPR pipes during water flow absorbs sound and vibration
• Condensate does not occur due to the low thermal conductivity on the outer surface of pipe

Crude oil flowing from wells contain fair amount (often 20-30%, sometimes up to 60-65%) of water with dissolved salts from basis point up to 1-2%. This significantly increases viscosity of crude oil, generates stable emulsion and makes the oil inadequate for refining and transportation. Water produced together with oil is usually in very unusual state, i.e. it is spread in oil in the form of droplets (emulsified form). Less the size of droplets, more stable the emulsion. One of the main reasons of emulsion stability is also the presence of resin, pyrobitumen, paraffin, and other oil admixtures like glycerine, microcrystal of paraffin, ceresin in crude oil. These substances generate quite firm and thick (protective films) on the surface of water and solid particles thus preventing merging of water drops and solid particles and their spontaneous segregation from oil. At present physical, thermal, physico-chemical, electrical and combined methods of oil emulsion breaking are used for oil dehydration and oil desalting. One of the widelyused and most effective methods is physicochemical combined method using chemical reagents demulsifiers. Demulsifiers are substances with high surface activity. They are concentrated in interfacial areas of oil emulsion, break protective films covering solid particles, water droplets and neutralise their electric charges. After this, small droplets will merge into bigger drops under the influence of mutual attraction, loosen and segregated from oil.Oil demulsifying is carried out in oil field and oil refinery plants.

At present “KARVAN-L” company tries to provide integrated work cycle: – development production supply and implementation of produced demulsifiers together with consumer. Demulsifier Karvan-200 is designed for oil dehydration and desalting in gathering system and oil treatment plant. Reagent can also inhibit corrosion processes.Demulsifier Karvan-201 is designed for separation of both light and heavy crude emulsion. This reagent is the composition of macroglycols and nitrogen-bearing surfactants in organic solvent environment
Demulsifier discharge per 1 ton crude is 10-60gr. Dosage depends on emulsion stability, treatment temperature, water separation period and desired depth of oil processing. Optimum dosage and demulsifier application process ensuring necessary results can only be defined as per test results carried out in practical use sites.

Packaging:
0.9 kg plastic container 12
4 kg plastic container 1
15 kg plastic container 1
175 kg drum -

TECHNOL LITOL-24 is a multipurpose lithium grease formulated with high quality mineral base oils and a lithium soap thickener. It is suitable for use in plain and rolling bearings, sliding surfaces, friction units of wheeled and tracked vehicles, industrial, agricultural, and construction equipment and marine machinery for various purposes under extreme operating conditions. This grease possesses high viscosity and exhibits outstanding resistance to oxidation, wear, corrosion, and rust. It has been formulated to provide excellent protection against high temperatures, extreme pressure, and shock loads. It is recommended for use in the temperature range from -40 C to 120 C.

Apple: GOST 656-79
Ingredients: natural apple juice, clarified. Nutritional value per 100g: carbohydrates - 9.1g, vitamins: PP-0.1mg, C-20mg, B1-0.01mg. Calorie-38 kcal.
Storage: temperature 0-25 C, relative humidity no more than 75%. Avoid direct sunlight. 0.2% natural precipitation is allowed. 11 Bx
Sterilized. Shelf life: 2 years after date of issue.

Quince: AZS 106-2003
Composition of nectar: quince juice, quince puree, sugar syrup. Nutritional value per 100g: carbohydrates - 12g, vitamins: beta carotene - 0.5mg, B1-0.01mg, B2-0.01mg, PP-0.1mg, C-5.5mg. Calorie-48 kcal.
Storage: temperature 0-25 C, relative humidity no more than 75%. Avoid direct sunlight. 13 Bx
Sterilized. Shelf life: 2 years after date of issue.

Rosehip: AZS 106-2003
Composition of nectar: rosehip juice, sugar syrup. Nutritional value per 100g: carbohydrates - 11g, vitamins: beta carotene - 0.5mg, C-0.15mg. Calorie-44kcal.
Storage: temperature 0-25 C, relative humidity no more than 75%. Avoid direct sunlight.
0.15% natural precipitation is allowed. 16 Bx
Sterilized. Shelf life: 2 years after date of issue.