Electromechanical console uncoiling machine for rolled metal products with a load capacity of 7 tons (load capacity of 10 tons optional); the uncoiling machine is equipped with sensors that monitor metal loops which are used to coordinate the unwinding speed of the roll with a speed of profiling block. It is the CONSOLE TYPE of an uncoiling machine that allows for an easy change of rolled metal products, which saves up to 30 pct of the time in use; a rolling mill for profiling (shaping) rolled metal products into suitably shaped (branded) metal profiles; A stamp device for application of “steps”; An oil station; Grooved guillotine shears for the dimensional cutting of tile effect roofing; A stacker for receiving finished products; An ACS of the line for specification of the number and the length of received products. General Specifications: Installed power of the lines: 14 kW Rolling speed: from 8 to 12 lin m/min Accuracy of rolling along the length: ± 2 mm per 6 m Quantity of reduction mills: from 14 to 17 pieces Lifting capacity of the uncoiling machine: 7 tons (10 tons) Attendants: 1 person Maximum overall dimensions of the used roll: Width: 1,250 mm; Outer diameter: 1,600 mm; Inside diameter: 500…600 mm. Receiving stacker length: 6 m Space required to accommodate the manufacture of tile effect roofing (LxWxH): 30,000×10,000×4,000 mm. Working temperature range for equipment operation: from +2 to +40 o