Jet A1 fuel-10 Lack barrel in Houston
Available Russian EN590 Directly with refineries. Best Price. TRANSACTION WORKING PROCEDURE FOB ROTTERDAM/HOUSTON 1. Seller's representative issues SCO and Buyer sends ICPO, CP and Tank Storage Agreement (TSA) as proof of storage availability. 2. Seller verifies TSA and issues Commercial Invoice for the available quantity. Buyer signs and returns the CI within 48 hours. 3. Seller issues to Buyer the transaction documents: - Product Origin Certificate - Statement of Availability of Product - Commitment to Supply - Authorization to verify via call or emails only. 4. After receipt of the certified copy of the transaction documents, buyer provides the seller with ATV, which must be previously approved by its Tank Storage company. 5. Upon receipt of the ATV and after successful inspection of buyerâ??s tank facilities by the technical team, seller issues the full POP documents below: - Fresh SGS Report - Seven (7) days Unconditional DTA - Loading Port Injection Report - Authorization to Sell and Collect (ATSC) 6. Upon complete verification of the POP documents, Buyer orders SGS to Conduct Dip Test of the product in Sellerâ??s Tanks at buyerâ??s expense. 7. Following the completion of the Dip Test with results consistent to the specifications on the CI, Buyer provides their TSR and ATI and Seller injects fuel into Buyer's leased storage tanks. Seller submits the full Injection report to the Buyer. 8. Buyer makes 100% payment by MT 103 TT wire transfer for the total product and Seller pays commission to all Intermediaries involved in the transaction within 24 hours after confirmation of the Buyerâ??s payment. 9. Seller issues draft SPA to Buyer to review for Roll & Extension monthly deliveries. 10. The subsequent delivery shall commence according to the terms and conditions of the contract, and intermediaries will receive their commissions according to monthly deliveries TRANSACTION PROCEDURE TABLE TALK MEETING (TTM) 1. Buyer confirms SCO and issue official ICPO with banking detail. 2. Sellers verify ICPO and issue Draft Contract open for amendments to Buyer. 3. Buyer review Draft Contract signs and returns with Buyer's international passport copy and NCNDA+IMFPA to seller. 4. Seller and Buyer legalized the signed Contract with the Ministry for approval and sends the scan copy of the Approved Draft Contract via secured e-mail to buyer.
Available Jet a1, very good prices directly with refineries. TRANSACTION WORKING PROCEDURE FOB ROTTERDAM/HOUSTON 1. Seller's representative issues SCO and Buyer sends ICPO, CP and Tank Storage Agreement (TSA) as proof of storage availability. 2. Seller verifies TSA and issues Commercial Invoice for the available quantity. Buyer signs and returns the CI within 48 hours. 3. Seller issues to Buyer the transaction documents: - Product Origin Certificate - Statement of Availability of Product - Commitment to Supply - Authorization to verify via call or emails only. 4. After receipt of the certified copy of the transaction documents, buyer provides the seller with ATV, which must be previously approved by its Tank Storage company. 5. Upon receipt of the ATV and after successful inspection of buyerâ??s tank facilities by the technical team, seller issues the full POP documents below: - Fresh SGS Report - Seven (7) days Unconditional DTA - Loading Port Injection Report - Authorization to Sell and Collect (ATSC) 6. Upon complete verification of the POP documents, Buyer orders SGS to Conduct Dip Test of the product in Sellerâ??s Tanks at buyerâ??s expense. 7. Following the completion of the Dip Test with results consistent to the specifications on the CI, Buyer provides their TSR and ATI and Seller injects fuel into Buyer's leased storage tanks. Seller submits the full Injection report to the Buyer. 8. Buyer makes 100% payment by MT 103 TT wire transfer for the total product and Seller pays commission to all Intermediaries involved in the transaction within 24 hours after confirmation of the Buyerâ??s payment. 9. Seller issues draft SPA to Buyer to review for Roll & Extension monthly deliveries. 10. The subsequent delivery shall commence according to the terms and conditions of the contract, and intermediaries will receive their commissions according to monthly deliveries TRANSACTION PROCEDURE TABLE TALK MEETING (TTM) 1. Buyer confirms SCO and issue official ICPO with banking detail. 2. Sellers verify ICPO and issue Draft Contract open for amendments to Buyer. 3. Buyer review Draft Contract signs and returns with Buyer's international passport copy and NCNDA+IMFPA to seller. 4. Seller and Buyer legalized the signed Contract with the Ministry for approval and sends the scan copy of the Approved Draft Contract via secured e-mail to buyer.
We work Directly with Refineries in the Russian Federation, NO long Chains!! Easy Procedures, Fast Transactions for Buyers Who Follow Procedures and Have Funding in Place. One of our refinery Group comprises one of the Largest Firms of its Kind, Allowing us to offer custom Pricing for select Clients! ONLY Buyer who can follow refinery procedures Need to Apply! Your client will need to choose these procedures and create an ICPO, cutting and pasting the Procedures into the new ICPO with it and address the ICPO to : REFINERY AGENT. Once the Refinery gets your buyers ICPO and SCO will follow. PROCEDURES FOB (DIP & PAY/ SPOT)-TRADING PROCEDURE 1. Buyer issues ICPO, company registration certificate, and data page of buyer's Passport or any I.D. 2. Seller issues Commercial Invoice (CI) Buyer signs and returns back to the seller with completed NCNDA / IMFPA. 3. Buyer issues Proof of funds (POF: Promissory Note) via swift MT799 to seller's nominated bank (bank to bank) to guarantee performance. 4. Seller issues below Partial POP materials to Buyer/Buyer's bank through email/ courier: a) TSA, TSR& SGS REPORT, b) REGISTRATION CERTIFICATE, c) STATEMENT OF PRODUCT AVAILABILITY, d) PRODUCT STORAGE LOCATION/GPS COORDINATES, e) AUTHORITY TO SELL & COLLECT, f) ATTESTATION TO VERIFY, g) INJECTION REPORT, h) UNCONDITIONAL DIP TEST AUTHORIZATION (UDTA). 5. Buyer conducts Dip test on the product and makes the payment for the total value of product injected into the tanks through the means of MT103/23 and final payment via MT103 or TT-Wire upon transfer of the Title of Ownership to the Buyer. 6. Seller pays all intermediaries involved in the transaction, upon successful lift, monthly extended shipments continue upon success and satisfactory by sides. If your clients don't want mt799, they can provide an attorney attestation letter to guarantee to close with ICPO. Then replace MT799 with mt199(cost-free) Only Refinery Procedures will be used on any deal, no exceptions! Please contact me with any questions and additional procedures.
Product: Aviation Kerosene Colonial grade JP54/ JPA1 Min Quantity: 500,000 BBL. Price: Gross$ 28/ Net $26 Per BBL Delivery: FOB- Rotterdam- Netherlands. ------------------------------------- Products: Russia Virgin D6 Fuel Oil Minimum QTY: 15.000.000 Gallons ---------------------------------------------- PRODUCT: RUSSIAN LIGHT CYCLE OIL [LCO] MIN QUANTITY: 20,000 MT Trial Shipment CIF Price: $170 GROSS / $160 NET ---------------------------------------------- PRODUCT: RUSSIAN EXPORT BLEND CRUDE OIL (REBCO)/ESPO MIN QUANTITY: 500,000 BBLS Trial Shipment CIF Price: $25 GROSS / $23NET PER BBL ----------------------------------------------- PRODUCT: LIQUIDIFIED NATURAL GAS [LNG] MIN QUANTITY: 20,000 MT Trial Shipment CIF Price: $220 GROSS / $210 NET ------------------------------------------------ PRODUCT: RUSSIAN ENâ??590 PPM (ULSD) MIN QUANTITY: 20,000 MT Trial Shipment CIF Price: $210 GROSS / $200 NET PER MT
Jet Fuel is used in aviation and was formerly known as Kerosene. It is suitable for most jet aircraft, and it is the principal fuel used for jet turbine engines. It is also used in general aviation for compatible diesel engine planes. It meets stringent international requirements with a minimum flashpoint of 38'C and a maximum freezing point of -47C. Contact Us for more details & costs
FOB Rotterdam PROCEDURE (TANK TO TANK) 1. Buyer submits ICPO, TSA and Company Registration Certificate. 2. Seller releases Commercial Invoice. 3. Buyer signs the CI and return to Seller. 4. Seller releases The following PPOP documents to the buyer secure channel: a. Refinery Commitment and Guarantee to Supply the product b. Statement of availability of the Product c. Tank Storage Receipt - TSR d. Product Passport 5. Upon receipt of the above PPOP documents, within 48 hours buyer present their Tank Storage Receipt - TSR as proof of storage availability. 6. Upon confirmation, seller sends Unconditional Dip Test Authorization (DTA) 7. Buyer conducts dip test in Sellers tanks and Lift the Product. 8. Buyer makes payment via MT103 or Wire transfer By MT103 for the total product available. 9. Buyer Lift the product and Seller pays all the intermediaries involved in the Transaction 10. Seller and Buyer proceed to sign contract for 12 month or more. FOB APPROVED PROCEDURE (TANK TAKE-OVER) 1. Buyer submits (ICPO) and Company Profile (CP). 2. Seller issues Commercial Invoice (CI). 3. Buyer signs the CI and returns to Seller 4. Seller issues The following PPOP documents to the buyerâ??s secure channel: a. Refinery Commitment and Guarantee to Supply the product b. Statement of availability of the Product c. Tank Storage Receipt - TSR d. Product Passport 5. Upon receipt of the above PPOP documents, within 48 hours Buyer proceed to contact the seller tank farm company and extend the tank for three (3) days. 6. Buyer conducts dip test in Seller's tanks and Lift the Product. 7. Buyer makes payment via MT103 for the total product injected into its tank as agreed and Seller issues to Buyer Title Transfer & Change of Ownership Certificate of the product. 8. Seller pays intermediaries involved within 48 hours after receipt and confirmation of the product payment. 9. Upon satisfaction by Buyer, both Buyer and Seller sign contract for month delivery with rolls and extension. If the procedures are suitable for you, please do not hesitate to contact us for further details. ICPO should be addressed to: End Seller via Gulliver Group Ltd.
The tarmac air craft tiedown system (tacts) was designed to give the land-based end user an option to use a field maintainable, self-sealing, superior tiedown system for securing aircraft. Existing systems are outdated and lend themselves to numerous and sometimes costly problems such as tripping and particle hazards. Constant retention of water causes rust and concrete degradation. Concrete chips from damaged concrete being chipped away by the tie down deck fitting hooks are common. If large particles or chips are not removed prior to aircraft engine operation, this could be extremely dangerous and costly. Should the tie down dowel need replacing, the entire area around the anchor needs to be cut out, fresh concrete poured, tested, and certified.
The platform air craft tiedown system (pacts) was designed to give the marine / offshore end user an option to use a field maintainable, self-sealing, superior tiedown system for securing aircrafts. Existing systems lend themselves to numerous and sometimes costly problems such as tripping hazards and corrosion from water retention.
Pallet dolly Proper protection, as per customer's requirements
Materials: 55cs The head of the snaps: 50crvc Thickness of cutter; 0.8-1.2 mm Packing: bulk, slide card packing
DC ground power units
Iridium, adblue, urea, copper, petroleum derivatives (en 590, jet a1, jp54, d6, d2).
Hi, I am closely connected to the seller mandate and can supply aviation kerosene Jet A1 fuel upto 5 mill barrel / month. Please contact me if you have any requirements for purchasing. I look forward to discussing further.
JET A-1 is an aviation fuel formerly known as "kerosene" which is suitable for most jet aircraft. It meets stringent international requirements, particularly those of the latest versions of the AFQRJOS, the British DEF STAN 91-91 standard, the ASTM D1655 standard, and the NATO F-35 specification. It has a minimum flashpoint of 38C and a maximum freezing point of -47C. JET A-1 is the principal fuel used for jet turbine engines. It is also used in general aviation for compatible diesel engine planes.
SOFT CORPORATE OFFER ATTENTION TO BUYER/BUYER REPRESENTATIVES. Here by issue this Soft Corporate Offer with presented term conditions and confirm our irrevocable corporate and legal responsibility, under penalty of perjury that we are ready, willing and able to supply the below mentioned products herein and issue a draft Contract then Sales Purchase Agreement upon acceptance of our term and conditions stipulated herein. The term and procedures stipulated herein is in accordance with the term and procedures of procuring Oil & Gas products from Russia Federation Terms of Negotiation Origin: Russia Federation Performance Bond : (Pb) 2% of the First Month Shipment Value Destination Aswp Incoterms: Fob / Cif / Tto Loading Port: Novorossiysk / Primorsk / Vladivostok / Rotterdam Ports Payment Terms: Irrevocable Lc, T/t Telegraphic Transfer, Bg or Sblc Mt760, Mt103/23, Mt103 Inspection: Sgs, Ciq or Similar Insurance: Paid by Seller, Covering 110% of Shipment Value Aviation Kerosene Jet Fuel Ja1/jp54/ts1 Minimum Liftable Quantity: 1,000,000 Bbl. Maximum 3,000,000 Bbl. Monthly Pricce Cif: Gross Usd $42.00/usd $40.00 Net Cif Price F.o.b: Gross Usd $38.00 Bbl Net: Usd $36.00 Bbl Origin: Russia Loading Port: Primorsk / Ust-luga/ Rotterdam CI DIP AND PAY FOB ACCEPTED TERMS AND PROCEDURE 1. Buyer sends ICPO with full banking details CP, Passport Copy and Company registration. 2. Seller issues CI to Buyer. 3. Buyer Sign/endorse CI within 48 hours. 4. Seller issue to Buyer following Transaction Documents: Tank Storage Receipt (TSR Valid 48 hours) Authorization to inspect (DTA Valid 48 hours) Authority to Verify (ATV) 5. Buyer upon receipt of the PPOP documents, buyer contact Tank farm for confirmation of the product and dip test within 48 hours. NOTE (BUYERâ??S FAILURE TO MAKE DIP TEST WITHIN 48 HOURS, BUYER WILL BEAR THE COST OF FURTHER EXPENSES) 6. Upon successful inspection, Buyer release payment for total product value. 7. Seller Transfer title and Trans-loading commence and issues NCNDA/IMFPA for commission payment.
Quantity MINIMUM 500,000 MAXIMUM 5,000,000Barrels x 12 months Delivery: CIF/F0B- Spot. CIF Price: USD Gross $56Net $54 per Barrel, FOB Price: Gross $44 / Net $42 USD per Barrel Commission: USD 2.00 seller side, USD 2.00 Buyer side Per Barrel
We are able to supply multiple kind of petroleum product. Please read the procedure before you have send any inquiry. Buyer issues ICPO with banking details, corporate registration certificate and profile, passport copy of authorised representative and proof of fund. Seller issues draft contract for Buyer to countersign upon acceptance of the terms and conditions which shall be returned immediately. Buyer triggers Proof of Fund (MT199) to Sellerâ??s fiduciary bank which shall be acknowledged by return SWIFT (MT199). Within 5 days upon receipt of POF, Seller provides partial proof of product (PPOP) to Buyer for verification; a) Product Passport (dip test report) b) Authorisation-to-Sell & Collect (ATSC) c) Statement of Product Availability d) Refinery Commitment to Supply Product e) Certificate of Product Origin Buyer verifies PPOP and issue SBLC (MT700/760/799-Blocked) to Seller nominated bank account within five (05) days as guarantee for the product. In the event of default in the issuance of DLC / BG / SBLC within the grace period, Buyer shall be liable for charges of Storage Tank(s). Within 5 days upon receipt of payment guarantee, Seller proceed with the Act of Transfer (Change of Ownership Title) from Sellerâ??s name to Buyerâ??s name as legal title-holder of the product with the Ministry of Energy. Simultaneously, Seller appoints and executes charter party agreement (CPA) with the shipping company and sends full proof of product (POP) and shipping documents to Buyer via Bank-to-Bank; a) Approval to Export (issued by the Ministry of Justice) b) Tank Storage Receipt c) Certificate of Conformity d) Full set of Bill of Lading (03 original copies) e) Vessel Notice of Readiness (NOR) f) Vessel Estimated Time of Arrival (ETA) g) Marine Insurance Certificate h) Material Safety Data Sheet (MSDS) i) Vessel Q88 Document j) Vessel details k) Ullage Report l) Cargo Manifest m) Corporate Invoice Upon arrival of cargo and after successful SGS/CIQ at discharge port, Buyer makes payment for product delivery to Sellerâ??s Bank via SWIFT Telegraphic Transfer (MT103) within 72 hours. Seller pays commission to intermediaries as per MFPA within 50 hours.
We are able to supply multiple kind of petroleum product. Please read the procedure before you have send any inquiry. Buyer issues ICPO with banking details, corporate registration certificate and profile, passport copy of authorised representative and proof of fund. Seller issues draft contract for Buyer to countersign upon acceptance of the terms and conditions which shall be returned immediately. Buyer triggers Proof of Fund (MT199) to Sellers fiduciary bank which shall be acknowledged by return SWIFT (MT199). Within 5 days upon receipt of POF, Seller provides partial proof of product (PPOP) to Buyer for verification; a) Product Passport (dip test report) b) Authorisation-to-Sell & Collect (ATSC) c) Statement of Product Availability d) Refinery Commitment to Supply Product e) Certificate of Product Origin Buyer verifies PPOP and issue SBLC (MT700/760/799-Blocked) to Seller nominated bank account within five (05) days as guarantee for the product. In the event of default in the issuance of DLC / BG / SBLC within the grace period, Buyer shall be liable for charges of Storage Tank(s). Within 5 days upon receipt of payment guarantee, Seller proceed with the Act of Transfer (Change of Ownership Title) from Seller's name to Buyer's name as legal title-holder of the product with the Ministry of Energy. Simultaneously, Seller appoints and executes charter party agreement (CPA) with the shipping company and sends full proof of product (POP) and shipping documents to Buyer via Bank-to-Bank; a) Approval to Export (issued by the Ministry of Justice) b) Tank Storage Receipt c) Certificate of Conformity d) Full set of Bill of Lading (03 original copies) e) Vessel Notice of Readiness (NOR) f) Vessel Estimated Time of Arrival (ETA) g) Marine Insurance Certificate h) Material Safety Data Sheet (MSDS) i) Vessel Q88 Document j) Vessel details k) Ullage Report l) Cargo Manifest m) Corporate Invoice Upon arrival of cargo and after successful SGS/CIQ at discharge port, Buyer makes payment for product delivery to Seller's Bank via SWIFT Telegraphic Transfer (MT103) within 72 hours. Seller pays commission to intermediaries as per MFPA within 50 hours.
Properties Flash point, Co Distillation: 50% recovered, Co 90% recovered, Co 95% recovered, Co Kinematic Viscosity at (40 Co), mm2/s Ash, %mass Aromatic Content, Vol % Sulfur Content, %mass Copper Strip Corrosion Rating (3h at a minimum control temperature) Cetane Index Cloud Point, Co Ramsbottom Carbon Residue on 10% Distillation Residue, %mass Colour Water, %mass Density (15 Co), kg/m3 Lubricity HFRR@ 600 C, micron Specification Min 57 Max 300 Max 355 Max 370 1.9 - 4.1 Max 0.01 Max 35 Max 0.05 Max No. 1 Min 45 Max 12 Max 0.3 Max 3.0 Max 0.05 Report Max 520 Test Method ASTM D93 OK ASTM D86 OK ASTM D445 OK ASTM D7042 ASTM D482 OK ASTM D1319 ASTM D2622 ASTM D5453 OK ASTM D130 OK ASTM D976 ASTM D4737 ASTM D2500 ASTM D524 OK ASTM D1500 OK ASTM D95 ASTM D1298 OK ASTM D4052 OK ASTM D6079 O
