Heat Exchangers: We Manufacture Shell and Tube Fixed Heat Exchangers, Also U Tube Heat Exchangers With Tube Plate, Shell, Baffles, Tie Rods, Header Etc, for Heat Transfer Applications Used in Chemical Industries, Thermal Plants With Steel and Stainless Shells and Tubes if Steel, Copper and Aluminum Tubes to Tema Standards.
Tube OD: 25-73mm. Tube Thk: 3.0-6.0mm. Fin Thk: 1.5-4.0mm. Fin Pitch: 9.0-30.0mm. Fin Height: 15.0-45.0mm. Square Fins are welded on 1 steel base tubes. We call it H Fin Type Tubing. Square Fin Tube with 90 Degree Bends, Rectangular Finned Tubes with 90 Degree Bends. Max. Working Temperature: 300 �°C. Atmospheric Corrosion Resistance: OK. Mechanical Resistance: Good. Fin Material: Copper, aluminum, carbon steel, stainless steel. Base Tube materials: Any material available, such as carbon steel Tube, ASTM A179, ASTM A192, ASTM A210, stainless tube ASTM A269, ASTM A213 T5 T11 T22 304 316. PRODUCTS DESCRIPTION: Features: HFin Tube is formed on both sides of the straight channel, can achieve good blowing effect.The space is compact, theoverall weight is reduced greatly, reduce cost H type fin can flow space uitilization effectively, keep the fin area and fin is larger thanthe thickness of the fin; can choose according to need any abrasion; fins are parallel to each other and independent, no effect of helxangle, which is convenient to ash. "HTYPE Fined tube can not only improve the windward side near the stagnation point speed, increase the axial purging.can increasethe leeward surface reflux disturbance again.The velocity distribution characteristics make H finned tubes is not easy to dust.
Amber colored low cost mixed bed for EDM and other general purposeuses.Portable Exchange Deionization (PEDI) provides flexible configurations and rapid deployment of ion exchange systems without the need to handle potentially dangerous chemicals or to deal with acidic and basic regeneration wastewaters. Portable exchange can be used for selective removal of targeted contaminants as well as for bulk deionization and polishing the effluent from other treatment processes. Suzhou X Chemical manufactures a wide variety of mixed bed and separate component resins specifically for the portable exchange industry. They are available regenerated (ready to use) and in exhausted forms (suitable for long term storage). Ion exchange resins for portable exchange use are available in high purity and low TOC versions suitable for pharmaceutical and semi-conductor applications
Specialized and Global Supplier of Fully Washed Original Titanium Sheets, Scrap, and Heat Exchangers.
Ss 316 Tube Type Heat Exchanger With Titanium Tubes In Ss 316 Grade
Material: copper and aluminum Surface treatment: anodizing Machining can assure 0.01mm Inspection tools: 2.5D Measuring Projector Strong ability on CNC Skived,CNC machining , FSW, Punching, Soldered, Brazing, production assembly Customized specifications and designs are accepted Optional for OEM Vansim (Dongguan) Hardware Products Co., Ltd locates in Chashan Town, Dongguan City. We are a professional manufacturer combines design, producing and sales for high-power heatsink and different Precision parts. Our products include cooler, Liquid cold plate, heatsink modules,heat pipe, skiving, extrusion,die casting heatsink, auto parts,cavities, extrusion aluminum parts,CNC machined parts,Precision CNC machining parts . All these products are widely used on high power supply ,Converter ,laser,Smart driving,refrigeration equipment,medical facilities, wind driven generation , New energy vehicleï¼?electronic communication facilities,different automatic equipment etc. We are open to OEM service as well as design & produce precision parts to meet customerâ??s requirements.
We are available with wide range of Plate Heat Exchangers: Alfa Laval A-10HBM M-10BW AM-10 A-10BFM M-10MFM AM-20HBM A-15HBM M-10BFM AM-20BFM A-15BFM M-15BFM MX-25BFM A-15BW M-15MFM AX-30HBM A-20HBM M-20M AX-30BFM A-20BFM M-3 P-252 AK-20FM M-30FM P-31 M-6M AK-20 P-32 M-6MW MK-15BW P-2 Contact Goyam Marine for further details
Product Model APV model T4 Q055E M107 R5 TR9GN B205 H12 Q055D M092 R8 TR9GL B158 H17 Q080E M060 R8GI SR6GL B134 N35 Q080D J060 R10 SR6AG B110 N25 A055 J092 R14 SR2(R2) B063 N50 A085 J107 TR9AL SR3 P190 Q030E A145 J185 TR9AV SR9 P105 Q030D K71 K55 K34
Heat Exchanger
We at JC Equipments in coimbatore offer world class heat exchanger particularly shell type. We offer all types of shell and tube heat exchanger for all industrial applications. where ever the pressure and temperature is available its required our heat exchanger. In heat exchanger industry the most important type of usage in oil industries and chemical process. This shell and tube heat exchanger having two parts. One is Shell side and another one is Tube side. JC Equipments Offer the below types of shell and tube heat exchangers: JC Fixed Tube Sheet Heat Exchanger JC Removable Tube Bundle Heat Exchanger JC Vertical Shell and Tube Heat Exchanger JC Stainless Steel Shell and Tube Heat Exchanger JC U Tube Bundle Type Heat Exchanger
We are manufacturers of all types of heat exchangers in Coimbatore India. We design and manufacture Double Plate Type, Shell and Tube, Air Cooled Heat Exchanger, Air Cooled Condenser, etc.
(1) the spiral wound tube heat exchanger is highly efficient and saves energy (steam). Internal unique reverse winding spiral coil structure, heat exchange in a current way, make fully condensing steam in the heat exchange tube bundle, do not need a second heat exchange, so it can save a lot of steam; (2) spiral wound tube heat exchanger is stainless steel welding, it can bear high temperature and high pressure. Because the heat exchange tube bundle and shell are all made of stainless steel material, with uniform expansion coefficient, the maximum pressure is1.6 MPa, the highest heat-resistant is 400 â??,it will not cause deformation of the heat exchanger because of pressure and temperature; so there is no need to prepare the equipment to reduce the pressure and temperature. (3) its structure is compact, with small size, saving infrastructure investment; Lightweight and easy to install, the equipment can be connected directly to the pipe, reducing installation cost. (4) the heat exchanger with Michael's (OWEN) turbulent buffeting frequency standard principle, the heat exchange tube bundle adopts the minimum clearance design, effectively eliminates the turbulent chattering phenomenon, prolongs the service life of the heat exchanger. (5) the heat exchanger is low in scale with a low maintenance cost, with unique structure, unique surface treatment technology, and on both sides of the counterflow heat exchange medium, not only improving the integrated heat transfer coefficient but also with self-cleaning function and low scale tend. The method of chemical descaling can be used to clean the heat exchanger, which can save time, power, cost and effect.
Shell and tube heat exchanger is made to transfer energy from high fluid heat transfer to the lower temperature fluid, the fluid temperature can reach the indexes of the flow rules, so as to meet the needs of process conditions, as well as one of the main equipment of improving energy efficiency. The heat exchanger industry deals with nearly 30 kinds of industries, such as HVAC, pressure vessel, and medium water treatment equipment, which form the industrial chain. The Shell and tube heat exchanger industry in china has achieved remarkable results in energy saving and efficiency, increasing heat transfer efficiency, reducing heat transfer area, lowering pressure drop, and improving thermal strength of a plant. Based on petroleum, chemical, electric power, metallurgy, shipbuilding, machinery, food, pharmaceutical, and other industries to stable demand growth of the heat exchanger.
Complete Set with Stainless steel AISI 316/ 316L plates. Suitable NBR, HNBR, EPDM, Viton, FKM, Special gasket Set.
We are a China based plate heat exchanger manufacturer, and we specialize in plate type heat exchanger, all kinds of plates and gaskets producing. 500+ moulds are with us, and we can replace the most applied plates and gaskets for Alfa Laval Gea, APV, Tranter, Sondex, Funke, Thermowave etc. Thereâ??s no difference when comparing our products with genuine ones. And through the past 13 years, we have been selling them to all over the world, especially in European and American markets. The GEA brand, plates and gaskets we can produce and replace is: NT50T NT50M NT50X NT100TNT100M NT100X NT150L NT150S NT250S NT250M NT250L NT350S NT350M Our plate material 304, 316L, Titanium, Hastelloy C-276 254SMO 904L; Our gasket and ring gasket material NBR, EPDM, VITON, HNBR, CR;
Weâ??re a China based plate heat exchanger manufacturer, and we specialize in plate type heat exchanger, all kinds of plates and gaskets producing. 500+ moulds are with us, and we can replace the most applied plates and gaskets for Alfa Laval Gea, APV, Tranter, Sondex, Funke, Thermowave etc. Thereâ??s no difference when comparing our products with genuine ones. And through the past 13 years, we have been selling them to all over the world, especially in European and American markets. The GEA brand, plates and gaskets we can produce and replace is: VT04 VT10 VT20 VT205 VT20P VT40 VT40(M) VT405P VT405 VT80 VT80(M) VT805 VT2508 Our plate material 304, 316L, Titanium, Hastelloy C-276 254SMO 904L; Our gasket and ring gasket material NBR, EPDM, VITON, HNBR, CR;
Wide Runner (Free Flow) Plate Heat Exchanger Maximum treatment capacity: 5000 cubic meters/hour Maximum design pressure: 40 bar Maximum temperature resistance: 200â?? Minimum temperature differenceï¼?0.5-1â?? Tube diameter: DN15~500 Plate thickness: 0.4mm - 1.2mm Gasket material: NBR, EPDM, HNBR,HT-NBR,HEPDM,CR,VITON/FKM Plate material: 304, 316, 316L, titanium, titanium palladium, hastelloy C276, 254SMO, nickel, 904L, etc. Large mean logarithmic temperature difference 02 Large log-averaged temperature difference Plate heat exchanger is mostly parallel or counter-current flow mode. Select the number of processes and channels, the initial selection of cold, hot fluid flow and the number of channels, and thus calculated flow rates. Cold, hot fluid in the plate heat exchanger flow parallel to the heat transfer surface, no bypass, thus making the end temperature difference is small, the logarithmic mean temperature difference is large .
Plate And Shell Heat Exchanger Plate Pack ATW40 ATW50 ATW100 ATW150
The double wall plate heat exchanger plate is welded integrally with two thin plate pieces along the corner hole of each pair of plates. When the plate leaks, for example, the perforation caused by long time working will be easily detected from outside. Thereby it stops mixing between two materials.And at the same time, they plays very important roles towards warning internal leakage. Combined with the double seal of the gasket, the possibility of mixing two materials is avoided, and it is suitable for applications with high sanitary requirements or high safety and reliability of industrial production. Since the two sheets are welded to form a sheet, the heat transfer coefficient is inevitably lowered, but the highest safety is achieved in preventing materials mixing.
The semi welded plate heat exchanger is composed of a pair of plates, and each of the two plates is laser welded to form a pair of plates. It is sandwiched between the fixed pressing plate and the movable pressing plate in a superimposed manner Product introduction Semi welded plate heat exchanger The semi welded plate heat exchanger is composed of a pair of plates, and each of the two plates is laser welded to form a pair of plates. It is sandwiched between the fixed pressing plate and the movable pressing plate in a superimposed manner. The mesh contacts are formed between adjacentplates and supported by each other, and the rigidity of the plates is remarkably enhanced. Our semi welded plate heat exchanger adopts advanced laser welding technology, which has the advantages of small welding deformation, small residual stress and high quality.Qingdao Ruipute has advanced welding technology, especially for the first time to achieve the welding technology of special materials such as titanium, we are at the domestic leading level in developing and manufacturing semi-welded titanium plate heat exchange equipment. The cavity of the pair of plates forms a pass of a medium; the two pairs of plates are sealed by a sealing gasket which is resistant to corrosion, high temperature and high pressure, and constitutes another medium pass; the two mediums flow evenly in a countercurrent way in the adjacent channels to complete the sufficient heat exchange process. This structure ensures the stability of the welded plate pairs, providing easy maintenance of each pair of plates. It has the characteristics of high safety, high heat transfer efficiency, long service life and easy maintenance. It is suitable for cooling and chemical treatment. It is the ideal alternative equipment to shell and tube heat exchanger and all welded plate heat exchanger.Especially suitable for evaporation and condensation of ammonia coolants,as well as chemical treatment of corrosive liquids. Maximum volume:5000m3 /h; Maximum design pressure:25bar Maximum temperature:150 celsius degree; Minimum difference in temperature:0.5-1celsius degree Nozzle diameter:DN15~DN500; Plate thickness:0.5mm - 1.2mm Gasket material:NBR, EPDM, HNBR, HT-NBR, HEPDM,CR,VITON/FKM Fixed and movable plate material: Carbon Steel, Stainless Steel, and others on request. Plate material:AISI304, AISI316, AISI316L, Titanium,Ti-Pa,Hastelloy C276,254SMO, Nickel, AISI904L. Characteristics The semi welded heat exchanger has the general characteristics with shell and tube heat exchanger, and yet have other features like
