Plates & Gaskets For Heat Exchanger 1.Raw material purchases from the same factory with famous brands like Alfa Laval, GEA, Funke etc. 2.Plates produced by precision molds and advanced press machine that detect & correct regularly. 3.Adpot same production and technology with Gislaved Gummi to ensure gasket quality. Plates material: SS304, SS316, SS316L, Titanium, Ti-Pd, Hastelloy-C276, Nickel, 254 SMO, 904L. Plates thickness: 0.5mm - 1.2mm Gaskets material: NBR, EPDM, HNBR, HT-NBR, HEPDM, VITON/FKM, FDA sanitary Hanging method: Glued, Hang on, Clip on, Snap in, Paraclip, Sonderlock. *Other materials may be available on request.
Product principle The plate and shell heat exchanger adopts a circular corrugated heat exchanger plate that welded into a heat exchanger lathed bundle and combined with the structure of the pressure vessel shell. It also has a high heat transfer efficiency,compact structure and resistant to high temperature & pressure like shell tube heat exchanger. The plate and shell heat is durable under high temperature & pressure,large temperature difference and thermal shock, which is in a leading position in the industry. Maximum volume:2500m3/h; Maximum design pressure:100bar Maximum temperature:450 celsius degree; Minimum difference in temperature:0.5-1celsius degree Nozzle diameter:DN25~DN500; Plate thickness:0.8mm - 1.2mm Gasket material:NBR, EPDM, HNBR, HT-NBR, HEPDM,CR,VITON/FKM Fixed and movable plate material: Carbon Steel, Stainless Steel, and others on request. Plate material:AISI304, AISI316L, Titanium,Ti-Pa,Hastelloy C276,254SMO,Nickel, AISI904L. Features Plate Shell Heat Exchanger Safe and reliable Unique and durable lathed bundle structure: It can resist pressure shock and thermal shock very well; round plate and circular ring welding, stress distributes evenly; no welding between lathed bundle and shell, and it can withstand various thermal expansion (deformation ).The tubular shell structure is a strong, durable and safe pressure vessel; it can be installed in any position without being affected from outside; the solid protective shell will not leak or burst, and there is no danger of leakage to the environment.
Plates & Gaskets For Heat Exchanger 1.Raw material purchases from the same factory with famous brands like Alfa Laval, GEA, Funke etc. 2.Plates produced by precision molds and advanced press machine that detect & correct regularly. 3.Adpot same production and technology with Gislaved Gummi to ensure gasket quality. Plates material: SS304, SS316, SS316L, Titanium, Ti-Pd, Hastelloy-C276, Nickel, 254 SMO, 904L. Plates thickness: 0.5mm - 1.2mm Gaskets material: NBR, EPDM, HNBR, HT-NBR, HEPDM, VITON/FKM, FDA sanitary Hanging method: Glued, Hang on, Clip on, Snap in, Paraclip, Sonderlock. *Other materials may be available on request.
The semi welded plate heat exchanger is composed of a pair of plates, and each of the two plates is laser welded to form a pair of plates. It is sandwiched between the fixed pressing plate and the movable pressing plate in a superimposed manner Product introduction Semi welded plate heat exchanger The semi welded plate heat exchanger is composed of a pair of plates, and each of the two plates is laser welded to form a pair of plates. It is sandwiched between the fixed pressing plate and the movable pressing plate in a superimposed manner. The mesh contacts are formed between adjacentplates and supported by each other, and the rigidity of the plates is remarkably enhanced. Our semi welded plate heat exchanger adopts advanced laser welding technology, which has the advantages of small welding deformation, small residual stress and high quality.Qingdao Ruipute has advanced welding technology, especially for the first time to achieve the welding technology of special materials such as titanium, we are at the domestic leading level in developing and manufacturing semi-welded titanium plate heat exchange equipment. The cavity of the pair of plates forms a pass of a medium; the two pairs of plates are sealed by a sealing gasket which is resistant to corrosion, high temperature and high pressure, and constitutes another medium pass; the two mediums flow evenly in a countercurrent way in the adjacent channels to complete the sufficient heat exchange process. This structure ensures the stability of the welded plate pairs, providing easy maintenance of each pair of plates. It has the characteristics of high safety, high heat transfer efficiency, long service life and easy maintenance. It is suitable for cooling and chemical treatment. It is the ideal alternative equipment to shell and tube heat exchanger and all welded plate heat exchanger.Especially suitable for evaporation and condensation of ammonia coolants,as well as chemical treatment of corrosive liquids. Maximum volume:5000m3 /h; Maximum design pressure:25bar Maximum temperature:150 celsius degree; Minimum difference in temperature:0.5-1celsius degree Nozzle diameter:DN15~DN500; Plate thickness:0.5mm - 1.2mm Gasket material:NBR, EPDM, HNBR, HT-NBR, HEPDM,CR,VITON/FKM Fixed and movable plate material: Carbon Steel, Stainless Steel, and others on request. Plate material:AISI304, AISI316, AISI316L, Titanium,Ti-Pa,Hastelloy C276,254SMO, Nickel, AISI904L. Characteristics The semi welded heat exchanger has the general characteristics with shell and tube heat exchanger, and yet have other features like
Principle A plate and frame heat exchanger as known as gasketed plate heat exchanger is a high efficiency heat exchanger that assembled from metal sheets with corrugated pattern and different kind of gaskets. Plate heat exchangers are the ideal equipment for heat exchange between liquid-liquid and liquid-vapor.In the case of the same pressure loss, the heat transfer coefficient is 3-5 times higher than that of the tube heat exchanger, but the floor space is one-third of the tube heat exchanger, and the heat recovery rate can be as high as 90% or more. Maximum volume: 5000m3 /h;Maximum design pressure: 25bar Maximum temperature: 200 celsius degree; Minimum difference in temperature: 0.5-1 celsius degree Nozzle diameter: DN15~DN500;Plate thickness: 0.4mm - 1.2mm Gasket material:NBR, EPDM, HNBR, HT-NBR, HEPDM, CR,VITON/FKM Fixed and movable plate material: Carbon Steel, Stainless Steel, and others on request. Plate material:AISI304, AISI316, AISI316L, Titanium,Ti-Pa,Hastelloy C276,254SMO,Nickel, AISI904L. Plate heat exchanger High heat transfer coefficient The design of the plate corrugation is aimed at the high thermal conductivity. The special flow path are formed by the plate corrugation causing strong disturbance flow at a very low flow rate, which is called turbulent flow. And the disturbance flow can be self-cleaning to prevent fouling and thus the heat transfer efficiency is high. Plate heat exchanger Large logarithmic temperature difference The temperature difference at the end is small, and the plate heat exchanger is mostly a cocurrent or countercurrent type of flow. In addition,there's no bypass flow. Plate heat exchanger Small footprint and easy maintenance The plate heat exchanger has a compact structure, and the heat exchange area per unit volume is 2-5 times that of the shell-and-tube type, and the floor area of the plate heat exchanger is about 1/2-1/3 of the shell - tube heat exchanger when achieving same heat exchange capacity .
Plate And Shell Heat Exchanger Plate Pack ATW40 ATW50 ATW100 ATW150
The double wall plate heat exchanger plate is welded integrally with two thin plate pieces along the corner hole of each pair of plates. When the plate leaks, for example, the perforation caused by long time working will be easily detected from outside. Thereby it stops mixing between two materials.And at the same time, they plays very important roles towards warning internal leakage. Combined with the double seal of the gasket, the possibility of mixing two materials is avoided, and it is suitable for applications with high sanitary requirements or high safety and reliability of industrial production. Since the two sheets are welded to form a sheet, the heat transfer coefficient is inevitably lowered, but the highest safety is achieved in preventing materials mixing.
Wide Runner (Free Flow) Plate Heat Exchanger Maximum treatment capacity: 5000 cubic meters/hour Maximum design pressure: 40 bar Maximum temperature resistance: 200â?? Minimum temperature differenceï¼?0.5-1â?? Tube diameter: DN15~500 Plate thickness: 0.4mm - 1.2mm Gasket material: NBR, EPDM, HNBR,HT-NBR,HEPDM,CR,VITON/FKM Plate material: 304, 316, 316L, titanium, titanium palladium, hastelloy C276, 254SMO, nickel, 904L, etc. Large mean logarithmic temperature difference 02 Large log-averaged temperature difference Plate heat exchanger is mostly parallel or counter-current flow mode. Select the number of processes and channels, the initial selection of cold, hot fluid flow and the number of channels, and thus calculated flow rates. Cold, hot fluid in the plate heat exchanger flow parallel to the heat transfer surface, no bypass, thus making the end temperature difference is small, the logarithmic mean temperature difference is large .
Product Model APV model T4 Q055E M107 R5 TR9GN B205 H12 Q055D M092 R8 TR9GL B158 H17 Q080E M060 R8GI SR6GL B134 N35 Q080D J060 R10 SR6AG B110 N25 A055 J092 R14 SR2(R2) B063 N50 A085 J107 TR9AL SR3 P190 Q030E A145 J185 TR9AV SR9 P105 Q030D K71 K55 K34
We are a China based plate heat exchanger manufacturer, and we specialize in plate type heat exchanger, all kinds of plates and gaskets producing. 500+ moulds are with us, and we can replace the most applied plates and gaskets for Alfa Laval Gea, APV, Tranter, Sondex, Funke, Thermowave etc. Thereâ??s no difference when comparing our products with genuine ones. And through the past 13 years, we have been selling them to all over the world, especially in European and American markets. The GEA brand, plates and gaskets we can produce and replace is: NT50T NT50M NT50X NT100TNT100M NT100X NT150L NT150S NT250S NT250M NT250L NT350S NT350M Our plate material 304, 316L, Titanium, Hastelloy C-276 254SMO 904L; Our gasket and ring gasket material NBR, EPDM, VITON, HNBR, CR;
