(1) the spiral wound tube heat exchanger is highly efficient and saves energy (steam). Internal unique reverse winding spiral coil structure, heat exchange in a current way, make fully condensing steam in the heat exchange tube bundle, do not need a second heat exchange, so it can save a lot of steam;
(2) spiral wound tube heat exchanger is stainless steel welding, it can bear high temperature and high pressure. Because the heat exchange tube bundle and shell are all made of stainless steel material, with uniform expansion coefficient, the maximum pressure is1.6 MPa, the highest heat-resistant is 400 â??,it will not cause deformation of the heat exchanger because of pressure and temperature; so there is no need to prepare the equipment to reduce the pressure and temperature. (3) its structure is compact, with small size, saving infrastructure investment; Lightweight and easy to install, the equipment can be connected directly to the pipe, reducing installation cost.
(4) the heat exchanger with Michael's (OWEN) turbulent buffeting frequency standard principle, the heat exchange tube bundle adopts the minimum clearance design, effectively eliminates the turbulent chattering phenomenon, prolongs the service life of the heat exchanger.
(5) the heat exchanger is low in scale with a low maintenance cost, with unique structure, unique surface treatment technology, and on both sides of the counterflow heat exchange medium, not only improving the integrated heat transfer coefficient but also with self-cleaning function and low scale tend. The method of chemical descaling can be used to clean the heat exchanger, which can save time, power, cost and effect.
Shell and tube heat exchanger is made to transfer energy from high fluid heat transfer to the lower temperature fluid, the fluid temperature can reach the indexes of the flow rules, so as to meet the needs of process conditions, as well as one of the main equipment of improving energy efficiency. The heat exchanger industry deals with nearly 30 kinds of industries, such as HVAC, pressure vessel, and medium water treatment equipment, which form the industrial chain. The Shell and tube heat exchanger industry in china has achieved remarkable results in energy saving and efficiency, increasing heat transfer efficiency, reducing heat transfer area, lowering pressure drop, and improving thermal strength of a plant. Based on petroleum, chemical, electric power, metallurgy, shipbuilding, machinery, food, pharmaceutical, and other industries to stable demand growth of the heat exchanger.
Morish India designs and manufactures â??Shell & Tube Heat Exchangersâ?? which are the most widely and commonly used Heat Transfer Equipment in many industries. TYPE-Fixed Tube Sheet, Removable tube Bundle CAPAICITY- As per user requirements SHELL DIA- 4 Inch To 50 Inch SHELL LENGTH- Max 120 Inch TUBES-Plain, Corrugated, Integrally Finned
Material Aluminum Grade AISI Color Silver Voltage 220V Power 1-3kw Driven Type Electric Warranty 1 Year Automation Grade Automatic
We supply specialized  manufactured Shell amp Tube Heat Exchangers amp Pressure Vessels Delivering superior quality products in minimum delivery time MOC we can supply in copper brass carbon steels stainless steels like SS304 SS310 SS316L copper alloys such as cupro nickel Admiralty amp Aluminum Brass and many other materials We can supply Heat Exchangers amp Pressure Vessels up to 40 Tons The product range includes the proprietary plate fin tube heat exchanger oil coolers inter coolers after coolers marine heat exchangers oil cooling systems condensers chillers economizers super feed heat exchangers receivers and surge drums This products are extensively used in oil and gas refineries air separation plants chemical steel refineries pharmaceutical industries air conditioning amprefrigeration plants heat treatment shops marine engines amp gear boxes induction furnaces machine tools diesel engine generating sets compressors power plant installations transformers hydraulic power packs food processing vegetable oil refining amp sugar industry etc We are supplying this with certifications such as U R amp NB Stamp from ASME ISO 90012008 quality certificates from LRQA and certifications from DGQA IRS NSIC etc This are all manufactured in Nondestructive testing such as Visual Inspection Liquid penetrant testing Radiographic testing Tube to Tube sheet Weld radiography Ultrasonic testing for raw material and welds Helium leak testing Bubble Leak testing Magnetic particle testing
What is a spiral wound tube heat exchanger? Spiral wound tube heat exchanger, also known as threaded tube heat exchanger, turbulent heat exchanger, double bellows heat exchanger. It is a new type of shell and tube heat exchanger. Each heat exchange tube is evenly wound in the heat exchanger shell according to a certain rule. According to the different interface structure, it is divided into L type and Y type. According to whether it can be disassembled, it can be divided into detachable type and non-detachable type. Type: Y type,T type,detachable,double tubesheet, cold trap, gas-liquid separation etc. Material:austenitic stainless steel 316L, double-phase stainless steel 2205, 2507, pure titanium, zirconium, Hastelloy alloy, etc. Tube type:Spiral wound tube/parallel tube/U type tube Tube: �¦8ï¼?�¦10ï¼?�¦12, �¦14ï¼?�¦16,�¦19ï¼?�¦25etc. Maximum working pressure:4Mpa Heat exchanger area:0.1-1000 square meters working temperature:-20-300 degree celsius (customizable) Applicable fluids:steam, circulating water, frozen brine, glacial refrigerant, glycol;. installation type:Horizontal/Vertical Function:Heater, cooler, condenser, evaporate, distillation, rectification Application:Distillation reflux system, concentration system, distillation system, waste gas and heat recovery system, traditional Chinese medicine extraction system, instantaneous sterilization at high temperature, CIP cleaning system, civil HVAC system,heating and cooling of process materials Customization:According to the technical requirements of customers, we can accurately customize the winding tube heat exchangers with various spacing. Package:Standard export wooden box,can be packaged according to customer requirements. Advantages: 1.High heat transfer coefficient :Unique wound tube bundle optimizes the flow state of the fluid on both sides 2.Long service life spiral :The elastic tube bundle can effectively absorb stress and vibration, prolong the service life of the heat exchanger 3.Low scaling tendency :Thereâ??s no dead angle in the heat exchanger, and the tube side and shell side can be emptied; the high flow rate design of the shell side can effectively reduce the probability of scaling on the surface of the heat exchange tube 4.small floor space: Compact structure,about 1/5 of the traditional heat exchanger 5.Low operating cost : Under heat conditons ,it can save the steam ;under the condensation conditions,it can improve the recovery rate. � Shandong Qinglei Environmental Technology Co.,Ltd is an equipment manufacturer integrating design, production and assembly. Our products include heat exchangers, heat exchange units, pressure vessels, storage tanks, TCU temperature control systems, reactors, distillation towers, VOCS purification and recovery systems, vacuum frying machine. If you need any of them,please donot hesitate to let me know,I will reply you ASAP.
Supplier: Heat exchanger, spiral wound tube heat exchanger, shell and coil heat exchanger, tubular heat exchanger, double tube heat exchanger, intelligent temperature control system, waste heat recovery system, tank
Services: Import & export
Buyer: Steel
A spiral heat exchanger refers to a pair of flat surfaces that are coiled to form the two channels in a counter-flow arrangement. Each of the two channels has one long curved path. The main advantage of this device is its highly efficient use of space.
Specifications Stainless steel pipe/tube 1.Grade:304, 304l, 316, 316l, 321, 317l, 310s, 904l and so on. 2. Standards: astm, jis, din, gb and so on. Standard export packing
Design Features & Benefits The spiral plate heat exchanger is made by rolling two long metal plates around a center core to form two concentric spiral flow passages, one for each fluid. The plate edges are welded shut so that each fluid stays within its own passage and there is no flow bypassing or intermixing. Channel plate width and spacing (gap between plates) are optimized for the specified duty, maximum heat transfer, and ease of access. The plate gap is maintained by welded spacer studs although some designs do not require them. Due to its inherent circular design and large surface area to volume ratio, the spiral heat exchanger offers unique advantages over other types of heat exchangers like the shell and tube. High Thermal Efficiency Single and long curving flow passages with a uniform rectangular cross-section ensure superior flow distribution, intense turbulence, and high heat transfer coefficients (50-100% greater than shell & tubes). Self-Cleaning Passages The spiral's single-flow passages induce high shear rates that scrub away deposits as they form. This self-cleaning effect reduces fouling and makes spiral heat exchangers ideal for handling tough fluids such as process slurries, sludge, and media with suspended solids or fibers. Countercurrent or Co-current Spiral heat exchangers normally operate in true countercurrent flow for close approaches and temperature crosses. Occasionally a co-current flow design has major benefits, especially in cooling or heating fluids prone to gelation, burn-on, freezing or similar skin temperature related fouling. Small Footprint & Easy Access The spiral heat exchanger is compact and requires minimal space for installation and servicing. Removable covers provide easy access to interior heat transfer surfaces for field inspections, routine maintenance, or manual cleaning if required.
