Curtain Bracket
Galv. Malleable Wire Rope Clip Din 1142 Material: Body with malleable cast, Heavy duty Type, U-BOLT with mild steel. Finished: Galv. Packing: Gunny Bags and then on pallets. Minimum order quantity: 200pcs for one size. Code: DS-GMWC42 Size: 5-40mm
Essential details Finish:ZINC Application:General Industry, Industry Studs type:Metric studs b1=1.25d Customized support:OEM Material:Steel Surface treatment:Zinc Plated Packing:Cartons+plastic Bags Supply Ability Supply Ability:5000 ton per Month Packaging & delivery Lead time: Quantity(pieces) 1 - 10000 10000 Lead time (days) 45 To be negotiated
Metric Thread: Item No. WLL/T Thread M Technical parameter/mm Tightening Torque/Nm Weight/kg L A B C D F K H S DS888-M8 0.5 M8 1.25-6g 12 50.5 37 76 14 101.5 49.5 38 8 30 0.8 DS888-M10 0.7 M10 1.5-6g 16 50.5 37 76 14 101.5 49.5 38 8 60 0.8 DS888-M12 1 M12 1.75-6g 18 50.5 37 76 14 101.5 49.5 38 8 100 0.8 DS888-M14 1.5 M1 2.0-6g 21 50.5 37 76 14 101.5 49.5 38 8 120 0.8 DS888-M16 2 M16 2.0-6g 24 50.5 37 76 14 101.5 49.5 38 8 150 0.8 DS888-M18 2.5 M18 2.5-6g 40 73 54 105 20 145 77 48 12 200 1.9 DS888-M20 3 M20 2.5-6g 40 73 54 105 20 145 77 48 12 250 2 DS888-M22 3 M22 2.5-6g 40 73 54 105 20 145 77 48 12 250 2.1 DS888-M24 4.5 M24 3.0-6g 40 73 54 105 20 145 77 48 12 400 2.5 DS888-M27 5 M27 3.0-6g 40 98.5 73 149 30 201.5 103.5 68 17 450 5.5 DS888-M30 7.3 M30 3.5-6g 45 98.5 73 149 30 201.5 103.5 68 17 500 5.5 DS888-M33 8 M33 3.5-6g 50 98.5 73 149 30 201.5 103.5 68 17 800 5.5 DS888-M36 10 M36 4.0-6g 54 98.5 73 149 30 201.5 103.5 68 17 1000 5.5 DS888-M39 10 M39 4.0-6g 58 98.5 73 149 30 201.5 103.5 68 17 1200 6 DS888-M42 12.5 M42 4.5-6g 63 98.5 73 149 30 201.5 103.5 68 17 1500 6 DS888-M45 15 M45 4.5-6g 63 98.5 73 149 30 201.5 103.5 68 17 1800 6 DS888-M48S 16 M48 5.0-6g 63 98.5 73 149 30 201.5 101.5 70 17 2000 6.5 DS888-M48B 20 M48 5.0-6g 68 120 93 182 36 249 125 84 19 2000 11.5 DS888-M52 20 M52 5.0-6g 68 120 93 182 36 249 125 84 19 2000 12 DS888-M56 25 M56 5.5-6g 78 120 93 182 36 249 125 84 19 2100 12 DS888-M60 25 M60 5.5-6g 90 120 93 182 36 253 125 88 19 2200 13 DS888-M64S 32 M64 6.0-6g 90 120 93 182 36 253 125 88 19 2200 13 DS888-M64B 33 M64 6.0-6g 100 186 144 278 58 395 195 136 36 6000 42 DS888-M72 4 35 M72 4.0-6g 110 186 144 278 58 395 195 136 36 7000 43 DS888-M72 6 35 M72 6.0-6g 110 186 144 278 58 395 195 136 36 7000 43 DS888-M80 40 M80 6.0-6g 120 186 144 278 58 395 195 136 36 8000 44.5 DS888-M90 45 M90 6.0-6g 135 186 144 278 58 395 195 136 36 9000 46.5 DS888-M100 50 M100 6.0-6g 150 186 144 278 58 395 195 136 36 10000 49
Material: Cast malleable steel. Made by Cast. Finished: Galv. self-color. Packing: Gunny bags and then on pallets. (customer are available) Feature: Made by Cast Steel. Advantage: Price cheaper then forged Steel. Benefit: General Using, widely. All commonly purpose Brand:DAWSON/OEM Code:DS-TMCT Size:100-3000kg
High Quality Furniture accessories Stainless steel, Aluminum sofa leg in different shapes Round, Square Size: 4" Material: Stainless steel Model: BL-2 and BL-3 Color: SS, BA
Ananka Group is India's leading & growing manufacturer brand of Fasteners. We have Carbon Steel Fasteners, Stainless Steel Fasteners, Alloy Steel Fasteners, Inconel Fasteners, Monel Fasteners, and Titanium Fasteners.
We produce all kinds of glass hardware, auto parts, pump and valve parts, marine hardware and other investment castings.
Stainless Steel Fasteners Nickel Alloy 200 Fasteners Monel 400 Fasteners Inconel 600 Fasteners Inconel 625 Fasteners Incoloy 800 Fasteners Incoloy 825 Fasteners Titanium Gr2 Fasteners Hastelloy C276 Fasteners Duplex Steel 2205 Fasteners Super Duplex 2507 Fasteners Stainless Steel Nut Square Nuts, Heavy Hex Nut, Hexagon Thin Nuts, Hex Head Nut, Hexagon Nuts, Hexagon Coupling Nuts, Self Locking Nut, Hex Nut, Hexagon Domed Cap Nuts, Dome Nuts, Hexagon Castle Nuts Stainlesss Steel Bolt Foundation Bolts, Bolts, Counter sunk Bolt, H Bolts, Anchor Studs, Hex Bolt, Square Bolt, Anchor Bolts, Eye Bolts, U-Bolts, J Bolts, Lag Bolt, T- Head Bolts, Wing Screw Bolts,Mushroom Head Square Neck Bolts, Structural Bolts, Stud Bolts, Threaded Bolts, Stud Bolt, Hex Head Bolts Stainless Steel Screw Threaded Screw, Concrete Screw, CSK Screw, Socket Head Cap Screw, Anchor Screw, Socket Set Screws, Machine Screw, Socket Set Screw, Anchore Screw, Cap Screw, Shoulder Screw, Hex Screw, Grub Screw, Blind Rivet, Hex Head Screw, Panel Screw Stainless Steel Washer Star Washers, Square Washer, Plain Big & Small Washers, Sealing Washer, Split Washer, Tooth Washers, Tab Washer With One & Two Tab, Spring Washers Heavy Duty, Machine Washer, Flat Washer, Slot Washer, Plain Washer, Spring Lock Washers
Hex Head Bolts, Hex Head Screws, Heavy Hex Head Screws, Heavy Hex Nuts, Thin Hex Lock Nut, Prevailing Torque Nut, Plain Washers, Spring Washers, Direct Tension Indicator Washer, Heavy Ear washers, J-Type Bolts, L-Type Bolts, Threaded Rods, Heavy Hex Nut, Hex Jam Nut, I-Type Bolt
Dimensions, Weight and Performance Data Marzoli Peg High quality spare parts for Marzoli machines manufacture, importers and suppliers in India. We use the most advanced technology and graded raw materials to manufacture the Textile Machinery Marzoli Spare Parts like Marzoli Rings, Peg etc. We have been regularly supplying this "Marzoli Spare Parts" to many contractors and associated people in this Field across India. We would request to you to please send to us your enquiries for the same so that we can send to you more details and our commercial offer for the same.
Marzoli Rings Dimensions, Weight and Performance Data Machine Width With Doffer Max. 1420 mm Ring Diameter 36 - 54 mm Application Staple fibres up to 60 mm Tube Length 180 - 260 mm Spindle Gauge 70 - 75 mm Twist Range 4,0 - 80 Tpi (160 - 3150 Tpm) Material Cotton, man made fibres and blends Yarn Count 3,0 - 150 Ne (Nm 5,0 - 250). Ring Diameter 36 - 54 mm Tube Length 180 - 260 mm Spindle Gauge 70 - 75 mm Maximum yarn quality in all working conditions High drafts up to 80 fold. Optimum spindle speed at every phase of bobbin build up thanks to an inverter drive. Independent spindles, ring rail and drafting system drives. Extremely reliable and fast doffing system with no trailing ends. Simple and reliable transport peg system for either bobbins or tubes. Ring frame stops to prevent production of defective yarn. Flexible linking alternatives.
Bind the rope from the end at a distance equal to the loop desired, plus an additional length of about 10 times the diameter of the rope .split the rope by separating three adjacent strands, leaving the other three strands and core intact. Bend the large section(three strands core ) into the desired size loop and start laying the three separated strands in to the grooves of the bent section,as close to the throat as possible. Completely lay the three strands around the loop as deep into the throat as possible. allowing the six strands ends and the core to project close to the throat of the loop. In application of pressed-on ferrule is rolled in eye splice. Noticed how smooth the fabric is joined. Position the special ferrule over the rolled in splice in preparation for swaging. Ends are still flats. By administration of tremendous force by swaging machine, ferrule is tapered. Wire Rope Press Grip Sling Are Economical Safer And Easier To Work With Three slings you can count on high strength efficiency on all eye splices.they are tapered and completely sealed with at both end to avoid snagging on loads. these ferrules completely cover all strands and locks them securely into place. there are no opening or rough projection to catch on hands. Rope slings with special pressed on metal ferrules are easier to work with. Slings are made from 6x19 wire rope and from 6x37 wire rope. We recommended use of 6x19 construction. Upto 1 ¼ :6x37or large slings. Note: Standred sleeves are recommended for use with 6x19 or 6x37,IPS or EIF RRL,FC or IWRC wire rope.
Double Part Thimble Eye Double Part Basket Grommet Round Application for Grommat Grommat slings can be fabricated in very short circumstances. The reason is this: Grommat slings are made from one continuous length of strand or wire rope. This requires only one tuck-in point as compared with six tuck-in points needed manufacturer an endless sling. A Grommat consists of an endless rope having construction 6/1 construction & is used where high ultimate breaking strength of the rope is required beyond the limits of a single part rope. A strand of sufficient length to complete the Grommat shall be obtained by either of the following methods: Method A: An order strand shall be unlaid from a specimen of 6/1 rope conforming to the requirement of the customer. Method B: Unlaying from a specimen of 6/4 rope having strands in all respects equipment to those obtained by method A above. Method C: Using a virgin strand either prefromed or post formed & in all other respects equivalent to those obtained by method A & B. During the course of construction of a Grommat the performed lay of the strand shall be maintained and shall not be interfered with except when laying in the core for which purpose length of strand left to form the core should be straightened . The length of the strand required to form a Grommat shall be equal to about 7.5 times the parameter of the Grommat in case of spliced Grommat. But in case of complete streamline splicing length shall be 4 times the effective length. Butt Splice The two ends of the rope should be joined together by two five –tuck splices. Number of Tucks The splices shall be tucked three times the full size of strand, a fourth time with the strand each reduced to half the original number and a fifth with the strands each further reduced to one third the original number. The heart strand is to be rowed in during tucking so that a double heart is produced for at least the length of the first three tucks in both directions. Method of Tucking The Tucks of the Splice shall be made over one strand and under one strand against the lay of the rope. The heart strand of the rope shall not be removed when the strands are opened out for tucking, but may be cut to a suitable length. Finishing The ends of the splice in way of the twisted off ends of wire that is between the end and the third tuck shall be tightly served with seizing wire, after parcelling with canvas, Hessian or wax paper.
Two leg wire rope sling with main ring at top and hooks at the bottom. Three leg wire rope sling with main ring at top and thimble at the bottom. Four leg wire rope sling with main ring and intermediate ring at top with bow shackle at bottom. Four leg sling with main ring with thimble at top and plain loops at bottom. Braided / Plaited belt lifting slings - Available in standard lts. of 10m &10 in capacities ranging from 10 to 40 tons with steel core ropes.
Flattening Test - Ferrules shall be pressed, along the major axis until the inner, surfecestmeet. Multipurpose, Portable, Universal, Gearless, Hand, operated Pulling and Lifting machine, Supplied, complete with telescopic, operating handle and, standard Length of super flex steel fibre-mixed core, wire-rope fitted with Hook or Shackle at one end and, fused and tapered at the other end. After completion of the test, there shall, be no visible crack on the ferrule. Type, Normal Size, Length before Pressing Min., Length after pressing Min, Thickness Min T, Suitable for Normal Wire Rope Size, Lower Limit, Upper Limit, (1), (2), (3), (4), (5), (6), (7), Type A , 3, 11, 17, 1.61, 2.00, 3.15, 4.0, 10, 22, 1.7, 4.40, 4.75, 6, 10, 23, 2.1, 5.85, 6.30, 8, 27, 34, 3.0, 7.85, 8.40, 9, 30, 33, 3.50, 8.80, 9.45, 10, 32, 35, 3.75, 9.80, 10.50, 11, 36, 43, 5.25, 10.75, 11.55, Type B, 10, 45, 53, 4.2, 11.75, 12.65, 15, 46, 50, 3.8, 13.76, 15.75, 17, 50, 60, 5.2, 15.76, 17.85, 19, 56, 62, 5.00, 17.86, 19.99, 21, 62, 70, 6.20, 20.00, 21.99, 23, 78, 86, 7.55, 22.00, 23.89, 25, 83, 94, 8.00, 24.00, 25.99, 27, 92, 108, 8.85, 26.00, 27.99, 29, 98, 114, 9.85, 28.00, 29.00, 31, 101, 115, 10.00, 30.00, 31.99, 33, 105, 118, 11.07, 32.00, 33.99
Nominal size of rope A, C, D, F, G, K, R1, R (1), (2), (3), (4), (5), (6), (7), (8), (9), 08, 33, 11, 46, 9, 4, 3.5, 25, 12, 10, 44, 15, 56, 11, 6, 5.5, 32, 16, 12, 60, 20, 82, 13, 8, 7.5, 44, 22, 14, 60, 21, 82, 15, 8, 7.5, 44, 22, 16, 70, 23, 94, 17, 10, 29.5, 50, 25, 18, 80, 26, 104, 19, 12, 11.0, 56, 28, 20, 88, 28, 116, 21, 12, 11.0, 64, 32, 22, 100, 30, 125, 24, 14, 13.0, 72, 34, 24, 104, 33, 140, 26, 14, 13.0, 76, 38, 25, 114, 36, 150, 27, 16, 14.5, 82, 42, 29, 124, 39, 165, 31, 18, 16.5, 88, 44, 32, 140, 45, 190, 34, 20, 18.5, 100, 50, 35, 154, 50, 208, 38, 20, 18.5, 114, 56, 38, 169, 56, 234, 41, 22, 20.5, 125, 64, 41, 169, 56, 234, 44, 22, 20.5, 125, 64, 44, 190, 65, 260, 47, 25, 22.5, 140, 68, 48, 206, 67, 275, 51, 28, 25.5, 150, 75, 51, 229, 72, 300, 55, 32, 29.5, 165, 78, 54, 229, 76, 300, 58, 32, 29.5, 165, 78, 57, 243, 78, 330, 61, 34, 31.5, 115, 88, 64, 276, 88, 375, 69, 38, 35.5, 200, 100, All dimensions in millimetres., Note, For wire ropes of intermediate sizes, the next larger size of thimble shall be used., Dimension M is the standard pin hole and the largest pin-hole for each thimble. Should a, smaller pin-hole be required the diameter of this shall be stated in the enquiry and order.
Features Basket is cast steel. Wedge socket terminations have an efficiency rating of 80% based on the catalog strength of XXIP wire rope. Wedges are color coded for easy identification. Blue - largest wire line size for socket. Black - mid size wire line for socket. 7/16" on US4 9/16" on US5 Orange - smallest wire line size for socket. Cast into each wedge is the model number of the socket and the wire line size for which the wedge is to be used. Cast into each socket is the name "McKissick", "Crosby" or "CG", its model number and its wire line range. By simply changing out the wedge, each socket can be utilized for various wire line sizes (Ensure correct wedge is used for wire rope size). Load pin is forged and headed on one end. US-422 wedge sockets contain a hammer pad (lip) to assist in proper securement of termination. Crosby products meet or exceed all the requirements of ASME B30.26 including identification, ductility, design factor, proof load and temperature requirements. Importantly, Crosby products meet other critical performance requirements including fatigue life, impact properties and material traceability, not addressed by ASME B20.26. UWO-422 Wedges are to be used only with the US-422 Wedge Socket Assemblies.
Close Spelter Sockets All Dimensions in mm.
Factor Of Safety 5:1 Tensile Strength: 1770/1960 N/mm2 Note The capacity indicated in the above table, for basket hitch and choker itch is for guidance only, vertical column is the actual load the slings can be tested and certified in other words safe working load is applicable for vertical lift only.
