SH 200 is a ready-mixed, non-shrink, non-metallic, flow-able, high-strength structural grout. SH 200 contains a balanced blend of washed and graded silica sands, Portland cement, flow improving compounds, and a shrinkage compensating system which produces a volume stable structural grout. SH 200 produces high early and ultimate strengths without intermediate or latent shrinkage. SH 200 remains stable without failure from compressive loading, impact, lateral thrusts, high heat or continuous vibration. It is scientifically proportioned and is ready for use at varied consistencies from plastic to fluid.
SH 300 will form a high-strength abrasion and chemical resistant, self-leveling mortar. Because it is based on Portland cement and latex polymers, and does not depend on gypsum, it may be used indoors or outdoors. SH 300 flows out to produce a smooth resurfacing or leveling compound for structurally sound existing slabs.
SH 400 is a high-performance, fast-setting, multipurpose repair material. Durable in wet environments, SH 400 is a blend of Fast-Setting hydraulic cement and quality aggregates. SH 400 is non-metallic, and no chlorides are added. SH 400 with water to produce a workable, high quality mortar material that is ideal where fast strength gain, high durability and low shrinkage are desired. SH 400 sets in 15 minutes and achieves structural strength in 1 hour.
SH 500 is a high-performance, polymer modified, cement coating. Durable in multiple environments, SH 500 is a blend of Rapid Set hydraulic cement, high performance additives and quality aggregates. SH 500 has a working time of 30 minutes, can be exposed to hydrostatic pressure in 3-5 days, and cures to a concrete gray color.
Product Description Alumina Cement 70 is a light-coloured premium quality calcium alumina cement process in rotary kiln using best quality raw materials. The product endures early strength and improves refractory and physical properties like abrasion resistant providing stable cement matrix . Product Specification CaO(%) 30.00 ( Max) MgO (%) 0.50 (Max) Al2O3(%) 68.00 (min) SiO2 (%) 0.80 ( Max) Fe2O3(%) 0.50 (Max) SO3 (%) 1.00 (Max) TiO2 (%) 2.00 (Max) Application Areas Conventional Castable Low Cement Castable Rapid hardening Resistance to abrasion Product Features Give higher early strength Used as cementitious additive in formulated products Used as hydraulic binder in refractory Accelerator in Concrete. High Abrasion Resistance. Resistance to Acid Corrosion . Packing - 25KG HDPE bag / 0r In 1 Mt Jumbo Bags Weighing Container details - 20 crate accommodate 20 Mt Pricing - 0.75 US$ / Kg FOB Mundra port- Gujrat India / FOB Navasheva- Mumbai , India Minimum Order - 20 MT Origin - India
We provide the cement silo capacity from 50T to 500T. Cement silos are a necessary device in the production of concrete. The silo is designed for storing cement, fly ash, coal ash, lime, etc powder material. It is bolted type silo, easy to transport and install. It is manufactured divided into 3 parts, namely the top cover of the silo, the middle section, and the cone part. Each part is of piece production, all pieces of manufactured standard film. Cement silo Features and advantages: Perfect sealing Screw connection Waterproof, moisture-proof, anti-corrosion Convenient installation Safe and reliable The cement silo is usually matched with a cement screw conveyor, widely used for concrete batching plants. We supply factory-price cement silo, cement screw conveyor, and a complete set concrete batching plant for you. Welcome to contact us!
Class - G ( HSR ) and Class - A (O) in accordance with - API Spec 10A
It is used in mortar for plastering, masonry work, pointing, etc. It is used for making joints for drains and pipes. It is used for water tightness of structure. It is used in concrete for laying floors, roofs and constructing lintels, beams, stairs, pillars etc.
Cement.
A cement is a binder, a substance used for construction that sets, hardens, and adheres to other materials to bind them together. Cement is seldom used on its own, but rather to bind sand and gravel (aggregate) together.
Cement / clinker / small bags cement
Hydroxypropyl methyl cellulose (HPMC) is a natural polymer materials as raw materials,through a series of chemical processing and prepared non-ionic cellulose. It contains almost methyl cellulose(MC) of all the performance, your first choice for production of high quality building materials additives.To meet the needs of environmental protection, Our product with high water retention, dispersion, good fineness, good work ability, easy dissolution characteristics.It suitable for dry mortar building, both inside and outside wall putty powder milk (cream), adhesives, caulks, interface agents, coatings, self-leveling agent of new building materials
The improvement of the performance of low cement casting material is actually the application of micro powder technology. There is a gap between the stability of low cement castable and that of laboratory castable.Low cement castable easy to occur problems are: 1, poor construction performance, poor liquidity;2. The hardening speed varies greatly, and there is quick setting or non-setting;3, easy to burst in baking;4. Abscission occurs;5. Low strength and poor wear resistance.These are caused by refractory castable products abnormal damage and other quality problems. Low cement refractory castable itself in addition to wear resistance, refractory aggregate, is used with good raw materials fine powder and ultrafine powder, cement and admixture, etc., through adjusting the proportion of each component, improve the high temperature performance of castable, thereby improve the strength of refractory castable. Low cement castable key construction, should pay attention to is: (1) do not arbitrarily increase the water content of refractory castable, (2) mold support set too high, leading to castable water content is too large and vibration compaction;(3) No mold shall be set during lining construction of feeding pipe, and castable material shall be manually daubed;(4) In order to save the mold, the maintenance is less than 48 h to remove the mold, resulting in the casting cracking or internal damage;(5) The material, shape, size, welding quality, quantity, anti-expansion treatment and unreasonable expansion joints of the anchoring parts;Do not follow the operational sequence of dry stirring, wet stirring and feeding, directly mix the dry and wet materials, resulting in the castable is not fully mixed evenly, part of the material is not wetted by water, making the castable has no strength. There are also key water issues, to use tap water, to avoid the introduction of acid and base impurities, gradually add, in order to make the dispersant in the powder to play a full role.Excessive water addition will directly lead to a significant decline in the strength of refractory castable construction, and in the field construction the water addition tends to exceed the degree of artesification.The pouring body itself is easy to appear when the ambient temperature rises rapidly, the baking burst, resulting in large area of damage.Once the temperature of the castable itself is below 5 â??, the castable will still have no strength even after curing for 24 hours.The construction and maintenance shall be carried out in strict accordance with the 48-hour mold removal mechanism. In dry areas, water and wet maintenance shall be carried out; in cold areas, airtight heating maintenance shall be realized within 48-hour maintenance to ensure the maintenance temperature. In a word, if the above points can be achieved step by step in accordance with the requirements, it will certainly improve the performance of low cement casting.
Ordinary Portland Cement Type 52.5N 1. Quality : OPC Type I 52.5N (appendix 2) 2. Delivery Size : 3,000 MT 3. Loading Port : Teluk Bayur Port, West Sumatra, Indonesia, Max. Draft 9.5 meter 5. Loading Rate : 5,000 MT PWWD SHINC
Produced by Semen Padang Cement Type 42.5N 1. Quality : OPC Type I 42.5N (appendix 1) 2. Delivery Size : 3,000 MT 3. Loading Port : Teluk Bayur Port, West Sumatra, Indonesia, Max. Draft 9.5 meter 4. Loading Rate : 5,000 MT PWWD SHINC
Adding strength to the bond of PVC pipes and fittings, S-lon Solvent Cement brings superior bonds, providing for a vital link in your PVC pipe installations. Place of Origin:Sri Lanka Product Classification: Volatile Solvent Adhesives Usage: Construction and Plumbing, For bonding PVC-U pipes and fittings in non-pressure applications Material: PVC Resin with Solvent Certificate: SLS 935:1991 / BSEN 681/ASTM D 2564 Appearance: Even , Continuous and free of lumps and foreign matter Package: Bottles of 500g,250g,125g,75g,50g,25g Storage: Store in a cool dry place and out of direct sunlight
High Alumina Refractory Cement is manufactured from Calcined Alumina and high purity lime. It is used as a binder for all types of castable refractories. Ashapura offers two ranges; HARB 50 and HARB 70 with minimum alumina content of 50% and 70% respectively.
ZOE Cement Quick Set Easy mix rapid setting zinc oxide - eugenol cement for thermal insulation and temporary restoration. INDICATIONS Ideal temporary sealant and filling material for cavities after removal of carious dentine before permanent restoration Perfect cavity liner Temporary fixation of crowns and bridges Ideal cavity liner under most restorative materials PRODUCT BENEFITS Easy mix powder liquid composition Rapid setting Effective thermal and chemical insulator Excellent flowablility High compressive strength Excellent cavity liner compatible under most restorative materials
Polymer Reinforced ZOE Cement Intermediate Restorative Material (IRM) for class I and class lI restorations INDICATIONS As a base under amalgam and non resin restorations Temporary restoration in emergency treatments Sealing coronal portion of teeth under endodontic treatment PRODUCT BENEFITS Excellent physical properties due to added unique polymer reinforcing agents High compressive strength-High tensile strength Low film thickness, low solubility and excellent abrasion resistance High strength comparable to zinc phosphate cement
Poly Zinc+ is a zinc polycarboxylate cement which chemically bonds to the tooth structure. INDICATIONS Suitable for cementation of Crowns, bridges and orthodontic brackets Cavity lining under all restoration materials Temporary fillings and fillings of deciduous teeth