Asian Electronic Sensors Suppliers and Manufacturers

We are proud to say that for the first time in India, we are launching Battery temperature sensors for commercial purposes. The specialty of the sensor is that we can measure the in situ temperature. So far, the widely popular technique is to monitor the battery temperature by placing a sensor adjacent to it. As expected, the accuracy of this method is not up to the mark. Now with the advent of Arcotherm's unique sensors, more accurate values can be obtained. Currently, we are exporting these to the European market.

We manufacture Automobile Industry related temperature sensors. In BULK: 1) Automatic transmission (position sensor and ATF temperature sensor) 2) Motor temperature sensor 3)Battery temperature sensor/ current senso 4) Exhaust gas temperature sensor (recirculation) 5) Ambient air temperature sensor 6) Steering wheel and seat heat temperature sensor 7) Air duct temperature sensor

Engine Oil Level Sensor For " Porsche " Part Number : 95860616011

Left/Right Wheel ABS Speed Sensor For " Land Rover & Jaguar " Part Number : LR033457

Brake Booster Diaphragm Position Sensor For " Mercedes-Benz " Part Number : A0015401517

Engine Oil Pressure Switch For " Audi & Volkswagen " Part Number : 038919081M

DTZ-400G Series Surface Temperature Calibration System is primarily used to calibrate surface sensors of various sizes and types, such as thermistors, film sensors, surface resistance thermometers, ribbon sensors, surface thermocouples, and more. The product consists of a controller and a heater. It is easy to operate, intuitive to display, and can be heated simply by setting the temperature.The temperature rises rapidly and the multi-stage PID temperature control is accurate. The effective use range is up to 130mm in diameter and has a communication interface to communicate with the computer. This product can be used as an infrared camera calibration source if it is slightly changed. Product Features 1.The calibration temperature can reach 400 The temperature rises and the temperature drops quickly. DTZ-400 surface temperature calibration system has a good temperature rise and fall, from room temperature to 400, only 30 minutes, from 400 to room temperature, with a rapid cooling device only 50 minutes, greatly improving work efficiency . 2.Calibration plate diameter up to 130 mm, meeting most surface temperature sensor calibration needs 130mm and is sufficient for calibrating surface sensors of various sizes and types, such as thermistors, film sensors, surface resistance thermometers, ribbon sensors, surface mount thermocouples, etc. 3.External reference platinum resistance thermometer to reduce calibration uncertainty In order to achieve the ultimate in calibration accuracy, the design engineer deliberately reserved a thermometer socket at the bottom of the aluminum surface. platinum resistance thermometer with a diameter of 5 mm can be inserted as a standard for comparison and calibration, which greatly improves the calibration accuracy. 4.Excellent uniformity of temperature and surface finish on the calibration plane Surface sensors are often difficult to calibrate because it is difficult to find a flat, uniform source of surface temperature.The DTZ-400 Surface Temperature Calibration System utilizes aluminum as the surface and has a high finish that ensures that the calibrated sensor is in good contact with the surface temperature calibrator, reducing calibration uncertainty. The DTZ-400 uses a special heating material and a constant temperature structure to make the surface temperature more uniform. 5.Temperature control is accurate, stable, and overshoot temperature is small The device provides a variety of parameter options for the user to choose, including setting the PID parameters of the high,medium and low temperature segments, the inflection point between different temperatures, and the alarm temperature. 6.Portable and easy to use The weight of the whole machine is only 3.5kg, which is small and portable.

TADT portable humidity generator is a portable and high-precision temperature and humidity calibration instrument, which can meet the needs of measurement and calibration of conventional temperature and humidity measuring instruments such as temperature and humidity sensors, temperature and humidity transmitters, small temperature and humidity meters, etc. Functional characteristics * Test chamber space up to (3~5) times that of similar products, providing more efficient test conditions * The test chamber can accommodate various types of in-put cold-mirror-viewer probes for comparison and calibration * Composite sensor jack design, suitable for various diameter temperature and humidity sensors and transmitters * Transparent window and lighting design of measuring room to facilitate reading of various small temperature and humidity meters * Can be calibrated simultaneously (10~15) with small temperature and humidity probes * Calibrate (3-5) block size digital temperature and humidity meter simultaneously * The test chamber provides temperature uniformity within 0.1 in a full range of 5~50 * Design of external drying cylinder, desiccant replacement can be operated on-line, convenient and simple * Design of double-zone drying cylinder, supporting both molecular sieve and discolored silica gel * Visual display of liquid level and dryer state is beneficial to state monitoring during work * Provide 4 channel external (0~1) Vã??(0~5) V and (4~20) mA standard signal inputs * The instrument has built-in humidity conversion software to facilitate users to convert relative humidity, temperature and dew point temperature * Support temperature and humidity curve display, easy for users to view temperature and humidity state trend * 7-inch color LCD touchscreen

Specifications: Construction: open structure Using method: transmitter/receiver Center frequency: 23 +/- 1.0khz Sound pressure level: 115 db min. Sensitivity: -67 db min. Capacitance: 2500pf +/- 20% at 1khz Allowable input voltage: 80 vp-p Directivity: 50 +/- 15 degree Detectable range: 0.2 ~ 15m Resolution: 10mm Housing material: aluminum Carton lined with foam tray

Features: *Water proof and dual use *Compact and light weight *High sensitivity and sound pressure *Less power consumption *High reliability Electrical and Mechanical Characteristics: Type: LSPU1448FWAH09G, dia: 14mm, H: 9mm Using Method: Dual use Frequency: 48 +/- 1KHz S.P.L: >= 85dB (30cm/10Vrms) Sensitivity: >= -90dB/V/u bar Capacitance: 2100pF+/-25% at 1KHz Directivity: 110 x 50 degree Allowable input Voltage: 160 Vp-p Housing Material: Aluminum carton lined with foam tray

"The TandD RTR-574-S Wireless Temperature Humidity Light Data Logger The RTR-574-S Wireless Temperature Humidity Light Data Logger includes two sensors that simultaneously measure and record illuminance / UV intensity and temperature/humidity. This high accuracy data logger allows for the measuring and recording of the above items in various places such as facilities where people gather, where important documents and fine arts are being stored or displayed, where food and drink are being stored. Also, cumulative illuminance and the cumulative amount of UV light can be easily viewed even without stopping recording."

Parking sensor system Main features: Bibi alarm sound; Digital distance display ; Close-fitting installation; Insert-in ultrasonic sensors; Left-right obstruction identification; 3 colors alarm; Display size:78.5*28*21mm Tech. Specifications: Rated voltage:12v Operating voltage range:10.516v dc Rated current:10ma150ma Detection distance:0.21.5(m) Ultrasonic frequency:40khz Working temperature of display:-30+70� 20 set per caton 15 / 16 kgs, Dimension: 44cm x 34cm x 29cm

I. Product introduction The DTBH zero-temperature thermostat is a device that can provide a stable and accurate zero-degrees Celsius temperature field for the thermocouple reference end for a long time. It is an ideal substitute for the traditional ice bucket and is very suitable for the verification / calibration of thermocouples. The technical specifications of the equipment are in full compliance with the new regulations "JJF1637-2017 Low-cost Metal Thermocouple Calibration Specification". II. Product technical indicators Model DTBH-01 DTBH-03 Accuracy 0±0.05 0±0.03 resolution 0.001 0.001 stability 0.02/10min

Place of Origin: California, United States Brand Name: Original Model Number: HMS K1C1 F5.5 Usage: HMS K1C1 F5.5 Theory: Sensor Output: Sensor Lowest price: Pls Contact us! Lead time: 1-2days Condition: 100% New and Original WhatsApp: +8613715255627 Shipment: DHL/FEDEX/TNT/UPS/EMS.etc More detail: Contact us!!

Place of Origin: USA Brand Name: Melexis Model Number: MLX90614ESF-BCF Usage: Temperature Sensor Theory: Ultrasonic Sensor Description: MLX90614ESF-BCF Product name: MLX90614ESF-BCF Brand: Melexis Place of origin: United States Operation temperature: -40â?? to +85â?? Output: Digital Sensor Condition: Brand-new Warranty: 1 Year D/C: +19

Place of Origin: original Brand Name: original Model Number: OTP-638D2 Usage: Other Theory: Other Output: Other Description: OTP-638D2 Color: Original Color Shipping Term: DHL/TNT/FEDEX Payment: Union.Paypal TT Delivery time: 3 working days Quality: original

Product name 10TP583T operating temperature - 20 c to + 100 cpackage / case to-18 brand semitec mounting style through hole detectivity d-star at 500 f 14.7e7 cm hz1/2 / welement size1.05 mm x 1.05 mm noise equivalent power - nep2.2 nw/hz 1/2 photo sensitivity15 v/w height 2.85 mm length5.6 mm operating temperature range- 20 c to + 100 c

Supplier of walk-in environmental test chamber. Designed to perform high-temperature operations for large-sized test specimens. The multipurpose walk-in chamber is the perfect site for testing the components against humidity, temperature, and various climate conditions.

General product A temperature sensor is a sensor that senses temperature and converts it into output signal. The temperature sensor can accurately measures the ambient temperature and is widely used in agriculture, industry, workshops, warehouses and other places. This product measures the change in ambient temperature and outputs the temperature change value in the form of RS485 digital signal through inter processing. This product provides a temperature query command and provides digital signals at the same time. This product adopts RS485 half-duplex communication interface and is compatible with terminals with RS485 communication interface on the market, which is convenient for collecting temperature signals. The product has the characteristics of simple structure and convenient installation. Scope of application A variety of industries that require temperature, such as the food transportation industry, the pharmaceutical transportation industry, and temperature sensitive article storage industry. Parameter description supply voltage:DC9-30V supply current: