This is multi zone Indirect fired biscuit Oven suitable for general purpose biscuit baking.This Oven is divided into several independent heating zones along the Chamber.Each zone includes compulsory hot wind circulation system comprising a Combustion Chamber with Burner, Circulating fan, Turbulence fan, and the associated Duct work leading the banks of Radiator tubes.The oven identified by Technology Council, specialists consistently cognizance that is has reached the International level. It can meet the technological requirements for production of different biscuits. The machine is heated with gas (LPG or natural gas) or Oil (Diesel / Furnace Oil) Fired imported Burners which gives rapid heating up, high efficiency and energy saving . The oven is divided into independent heat control zones whose number depends upon the overall length of the oven. The top and bottom temperature of each zone can be preset and adjusted to reach heating demand of baking different biscuit.The colour, scent and taste of biscuits is overall improved to a higher grade. Standard wooden packing as per export.
The Rotary Rack Oven is equipped with a two way steamer that enables abundant steam..Also thicker materials have been used in this machine to maintain the absorbed heat and reduce at least 40% of burner ignition and consumption. The burner has to be selected according to the fuel that is used LPG / Diesel. Salient features: * Lower fuel consumption * Uniform colour * Consistent Baking. * Easy to operate * Completely built with stainless steel Firing Chamber: The complete Firing chamber will be insulated with mineral wool filled from out side to conserve heat and increase efficiency. The firing chambers Shell fabricated out of stainless steel. The Oven can maintain temperature up to 315° and temperature rises from room temperature to 225° in just 25 minutes. Heat Circulation:The hot air is distributed evenly into the Oven by a blower fan and oven's rotary movements provide even & uniform baking at all levels of the rack. Oven has an indirect diesel fired heating system so that burnt gases do not come in contact with the baking products. The fully automatic imported burner will be fitted to the chamber and the temperature controlled by automatic temperature controller, fitted on the control panel. Door:A full stainless steel door provides with heat resistance silicone gasket that sealed the door and gains heat of the oven. Insulation:The complete oven will be covered with mineral wool insulation and Mild steel or Stainless steel covers to avoid heat loss. Construction:The oven body consists of mild steel. The structure of oven is stand on angle frame and the all side of oven will be covered with Mild steel or Stainless steel sheets. Inspection:The Stainless Steel doors are provided with Toughened glass and interior light for the inspection during the process. Rack:The baking product is to be put in trays, which are placed in the rack, which rotates at a low RPM through a system of gearbox and motor, located at the top of the Oven Electrical:Three Phase Electricity required for running the system. Electrical controls indicators and starters will be fitted on the control panel. Fan:The circulating fan will be well balanced to avoid vibration and will give noise free operation in high speeds. Temperature Control: A digital indicating controller maintains temperature in the Oven, which comes with safety thermostat and a timer along with a hooter that helps in baking cycle. Standard Wooden packing as per order
The Rotary Rack Oven is equipped with a two way steamer that enables abundant steam..Also thicker materials have been used in this machine to maintain the absorbed heat and reduce at least 40% of burner ignition and consumption. The burner has to be selected according to the fuel that is used LPG / Diesel. Salient features: * Lower fuel consumption * Uniform colour * Consistent Baking. * Easy to operate * Completely built with stainless steel Firing Chamber: The complete Firing chamber will be insulated with mineral wool filled from out side to conserve heat and increase efficiency. The firing chambers Shell fabricated out of stainless steel. The Oven can maintain temperature up to 315° and temperature rises from room temperature to 225° in just 25 minutes. Heat Circulation:The hot air is distributed evenly into the Oven by a blower fan and oven's rotary movements provide even & uniform baking at all levels of the rack. Oven has an indirect diesel fired heating system so that burnt gases do not come in contact with the baking products. The fully automatic imported burner will be fitted to the chamber and the temperature controlled by automatic temperature controller, fitted on the control panel. Door:A full stainless steel door provides with heat resistance silicone gasket that sealed the door and gains heat of the oven. Insulation:The complete oven will be covered with mineral wool insulation and Mild steel or Stainless steel covers to avoid heat loss. Construction:The oven body consists of mild steel. The structure of oven is stand on angle frame and the all side of oven will be covered with Mild steel or Stainless steel sheets. Inspection:The Stainless Steel doors are provided with Toughened glass and interior light for the inspection during the process. Rack:The baking product is to be put in trays, which are placed in the rack, which rotates at a low RPM through a system of gearbox and motor, located at the top of the Oven Electrical:Three Phase Electricity required for running the system. Electrical controls indicators and starters will be fitted on the control panel. Fan:The circulating fan will be well balanced to avoid vibration and will give noise free operation in high speeds. Temperature Control: A digital indicating controller maintains temperature in the Oven, which comes with safety thermostat and a timer along with a hooter that helps in baking cycle. Standard wooden Packing as per Export.
Available capacity 12, 18, 36, 72 tray. Operated in diesel.
10 kg per 2 mtrs with 5 hpem&1.5 hpem 440 v/ac with steel arm and two bowls one fitted and one extra.
Capacity per 2mtrs with 30 hpem &3 hpem 440/ac with hydraulic up and down system with SS arm & two bowls -one fitted one extra.
Fully automatic fresh pasta machine FPL11 can be supplied on request. Laminating group rollers is 3 couples, Rollers width is 260 mm. Fully automatic fresh pasta machine FPL12 can be supplied on request. Laminating group rollers is 4 couples, Rollers width is 260 mm. Fully automatic fresh pasta machine FPL13 can be supplied on request. Laminating group rollers is 5 couples, Rollers width is 280 mm. Fully automatic fresh pasta machine FPL14 can be supplied on request. Laminating group rollers is 6 couples, Rollers width is 280 mm. Fully automatic fresh pasta machine FPL15 can be supplied on request. Laminating group rollers is 7 couples, Rollers width is 300 mm. Fully automatic fresh pasta machine FPL21 can be supplied on request. Laminating group rollers is 3 couples, Rollers width is 220 mm.
Fully automatic pizza base machine PBL11 can be supplied on request. Laminating group rollers is 3 couples, Rollers width is 330 mm. Pizza base diameter (Max): 280mm (11inch). Pizza base thicknees: 0.5mm~15mm. Fully automatic pizza base machine PBL12 can be supplied on request. Laminating group rollers is 3 couples, Rollers width is 450 mm. Pizza base diameter (Max): 400mm (16inch). Pizza base thicknees: 0.5mm~15mm. Export standard.
Made of stainless metal Set/bagged
We manufacture and export radiant(infrared cooker) cooker . Samples and photos will be ready for you. 1. Rating: 220v, 50hz, 2000w 2. Temperature:60~240ípc 3. Top ultra-black crystallite plate 4. 4-digital display screen 5. No electromagnetic radiation 6. Multiple functions, simple operation
1. Patent products, the implementation of industry standards. 2. High power compressor, imported from usa. High efficiency. 3. Swell valve imported from italy, refrigerant adjustable, high pump. 4. Condenser fan motor with external rotor, wind speed high, cooling effect well, energy saving. 5. Automatic computer control panel, led display board, automatic cleaning. 6. Auto counting: you can know the sales. 7. Deluxe stainless steel shell, which is better than the color coating material, always bright as new, wear-resistant. 8. Independent control switch, color, multicolor, rainbow, sandwich with ease. Type voltage power weight specification(mm) refrigeration Tml-760-1 220 v 5.54 kw 270 kg 800 x 560 x 1400 r22 Tml-760-1 380 v 5.54 kw 270 kg 800 x 560 x 1400 r22 Tml-780-1 380 v 7.72 kw 280 kg 800 x 560 x 1400 r22
Dimension: 640 x 450 x 450 mm Power:3.6 kw N/w: 27 kg Voltage: 220v-240v / 50hz
Baking pan Item:wx91001 Material:carbon steel Size:22.5*22.5*5 cm Thickness:0.4mm Coating:xflon Package:shrink+color lable Qty per ctn:30pcs Feature: 1. Non-stick 2.Eco-friendly and save energy Easy to clean up 3. Safe tp use in microwave and dishwasher 4. Heat-resistant and corrosion resistant Size:22.5*22.5*5 cm Thickness:0.4mm
Hp-6a popcorn machine Dimension: 500*370*680mm Power: 1.44kw 220v/50hz Capacity: 8oz Hp-12a popcorn machine Dimension: 500*410*790mm Power: 1.84kw 220v/50hz Capacity: 12oz Hp-16a popcorn machine Dimension: 750*550*1100mm Power: 2.34kw 220v/50hz Capacity: 18oz Charming designs and excellent product display make these units a winner. Most of popcorn machine with cb, ce, rohs, lfgb, saso certificate.
DXB225 automatic biscuit processing line,with original design,compact structure and high automation,is developed on the basis of absorbing Japanese technology.All working procedures that from feeding,calendaring,shaping,wastage recovering,drying to cooking can be accomplished once time.Hundreds of moulds and dozens of technology formulas make it possible to produce all kinds of poular biscuit such as cream biscuit,calcium biscuit,multi-vitamin biscuit,vegetable biscuit etc. 1/ Parameters for DXB225 Input votage 380V/50Hz Installed capacity 28.5kw Die-plate roller ª¦205*205mm Toasting temperature 200-300 centigrade degrees Acting width 200mm Dimension 18*0.6*1.5m. 2/ Parameters for more models: Model input voltage power output weight dimension DX225 380V/50Hz 28.5kw 50kg/h 1500kg 18*0.6*1.5m DXB280 380V/50Hz 56kw 100kg/h 2500kg 26*0.8*1.5m DXB400 380V/50Hz 120kw 200kg/h 4000kg 45*1.0*1.5m DXB600 380V/50Hz 200kw 400kg/h 10000kg 70*1.2*1.75m DXB1000 380V/50Hz 300kw 800kg/h 15000kg 100*1.85*2.45m.
The rolls are double poured duplex rolls and are manufactured by the advance centrifugal process. Duplex Rolls have the advantage of selecting the harder best performing material on the working surface, which is primarily a cr-ni-mo alloyed chill cast iron & a relatively softer material inside. After casting the rolls are annealed to relieve the Internal stresses thus improving the strength of the material. After heat treatment the rolls are proof machined & fitted with steel shaft to close tolerance. These rolls are manufactured for section mills producing rounds, squares, flats, hexagon, gate channel as well as mills producing tor steel and tmt bars. We also provide single poured chill Cast iron rolls for angle and channels
Features: 220-240v~50hz, 880w On/off switch with pilot light Pancake plate w/4 woks Non-slip feet 6 non-stick coated mini pans * available in 8 non-stick coated mini pans. 53.5x30.7x30.2 cm.
Features: 230v~50hz, 1000w Non-stick coated plate 6 black wok pans Integrated pancake parts On/off switch with pilot light Removable cord With 1 pc soup spoon.
Single hotplate features : *230V~50Hz, 1500W *Temperature adjustable *Diameter of cooking plate:187mm *With function indication light *White Color *VDE plug.
"biscuit size:round: ¦:30-70mm Square:(l)35-70mm (w)30-70mm (h)3-8mm" Capacity: 800-1200 pcs/min Operating voltage: 220v 50hz Total power:4.5kwnet weight:740kg Overall dimension:5500x4450x1500mm Seaworthy woodcase
