1, This machine consisted by the host pulping mechanism , worm wheel feeding mechanism, bearing, coupling and base version.
2, This machine is fixed on the two fixed abrasive discs of mill shell body and stator feed tray and installed on the rotor positioning plate of two rotor abrasive discs to form two grinding area.
3, Pulp passes through by the tube of the grinding shell body and the stator into the heart of the two grinding area, under the action of centrifugal force and slurry pressure through the grinding zone, after grinding zone tooth plate extrusion, complete the beating process, pulp out from mouth.
4, The rotor positioning plate connected to the main shaft with spline floating, as a flexible axial movement.
5, The grinding clearance is adjusted for the manual, through the worm gear transmission inspires wire mother rotates, the stator feed screw driven plate make the corresponding axial movement, makes the grinding area clearance change, grinding clearance and pressure to meet the process requirements, pressure current is the disc?s instructions.
6, It takes the elastic cylindrical coupling, smooth operation.
7, The disc material is wear-resistant alloy cast iron, all by grinding.
Instruction:
It is main equipment to make coarse and pure pulp. It is used to regrind pulp dross and recycle paper, high efficiency and less eletricity consumption.
Feature
It is suitable for continuous refining chemical,mechanical,and waste paper pulp under the consistency of 3%-5.5%.It is idea pulp beating equipment.
Description of Refiner 1.Double Disc refiner is used for continuous refining each kind of paper pulp ,straw ,wood,reed,bamboo,rags and waste paper pulp. 2.The equipment is mainly used for coarse beating, refining and re-pulping of broke and waste paper. 3.It is available for long fiber pulp such as cotton, wood and hemp. 4.The equipment is furnished with automatic control system and can beat with constant power or constant energy consumption. 5.The beating effect is stable.
The input voltage: 220 v Output power: 750 w The spindle speed: 1400 r/min Function:This machine is mainly used for soft material processing and polishing, such as amber, jade, green gold, etc. and using a small flat, suitable ditch sieve plate which is make the process faster, not easy deformation and high yield, especially for gem can't polish.
Double disc grinder Used for grinding two parallel surfaces simultaneously at a very high rate of output Principle of operation:- Double disc grinders have been developed to grind, two parallel flat surface, with the help of two grinding wheel faces, opposed to each other. The workpiece is advanced between the wheels, by various methods, either free floating or clamped, depending on the shapes, sizes, quantities as well as stock removals required. Advantages compared to conventional, flat surface grinders High production rate High parallelism Heavy stock removals Close tolerances Better surface finish Easy accessibility Low down time Low operating costs Facilitates easy automation Suitable for ferrous & non ferrous materials This components can be ground without damaging them Gradual stock removal throughout the work path across the grinding wheels, permits heavy stock removal
This is our 17 inch Triple Disc refiner Disc with conventional Ready to Fit design. In this we gave 4 mm rib width. We are using High Quality Raw material which leads to Increases the Strength and Durability of Refining Disc.Our discs are as per our customer needs. Depending upon their raw material, we are providing them best material composition.
Supplier: Refiner discs
Supplier: Disc refiners disc
Broaching extraction: 3 tons Broachinh stroke: 600 ~ 800mm .
Swing Over Table 200mm Distnace Between Centers 400mm Grinding Wheel Size: 305 x 38 x 127mm . Machine Weight: 2000 kgs.
Grinding Capacity: 6 ~ 150mm Max. Workpiece Length: 150mm. Machine Weight: 2,100 kgs.
