Description of Refiner
1.Double Disc refiner is used for continuous refining each kind of paper pulp ,straw ,wood,reed,bamboo,rags and waste paper pulp.
2.The equipment is mainly used for coarse beating, refining and re-pulping of broke and waste paper.
3.It is available for long fiber pulp such as cotton, wood and hemp.
4.The equipment is furnished with automatic control system and can beat with constant power or constant energy consumption.
5.The beating effect is stable.
1, This machine consisted by the host pulping mechanism , worm wheel feeding mechanism, bearing, coupling and base version. 2, This machine is fixed on the two fixed abrasive discs of mill shell body and stator feed tray and installed on the rotor positioning plate of two rotor abrasive discs to form two grinding area. 3, Pulp passes through by the tube of the grinding shell body and the stator into the heart of the two grinding area, under the action of centrifugal force and slurry pressure through the grinding zone, after grinding zone tooth plate extrusion, complete the beating process, pulp out from mouth. 4, The rotor positioning plate connected to the main shaft with spline floating, as a flexible axial movement. 5, The grinding clearance is adjusted for the manual, through the worm gear transmission inspires wire mother rotates, the stator feed screw driven plate make the corresponding axial movement, makes the grinding area clearance change, grinding clearance and pressure to meet the process requirements, pressure current is the disc?s instructions. 6, It takes the elastic cylindrical coupling, smooth operation. 7, The disc material is wear-resistant alloy cast iron, all by grinding. Instruction: It is main equipment to make coarse and pure pulp. It is used to regrind pulp dross and recycle paper, high efficiency and less eletricity consumption. Feature It is suitable for continuous refining chemical,mechanical,and waste paper pulp under the consistency of 3%-5.5%.It is idea pulp beating equipment.
The input voltage: 220 v Output power: 750 w The spindle speed: 1400 r/min Function:This machine is mainly used for soft material processing and polishing, such as amber, jade, green gold, etc. and using a small flat, suitable ditch sieve plate which is make the process faster, not easy deformation and high yield, especially for gem can't polish.
Double disc grinder Used for grinding two parallel surfaces simultaneously at a very high rate of output Principle of operation:- Double disc grinders have been developed to grind, two parallel flat surface, with the help of two grinding wheel faces, opposed to each other. The workpiece is advanced between the wheels, by various methods, either free floating or clamped, depending on the shapes, sizes, quantities as well as stock removals required. Advantages compared to conventional, flat surface grinders High production rate High parallelism Heavy stock removals Close tolerances Better surface finish Easy accessibility Low down time Low operating costs Facilitates easy automation Suitable for ferrous & non ferrous materials This components can be ground without damaging them Gradual stock removal throughout the work path across the grinding wheels, permits heavy stock removal
Supplier: Disc refiners disc
An accurately conditioned lapping plate rotates in the horizontal plane, on which conditioning rings, also rotating freely in the direction of the lapping plate, carry the work pieces, with the surface to be lapped, in contact with the lapping plate. Suitably mixed lapping compound is fed onto the lapping plate which laps/polishes the surface to be lapped and the flatness of the lapping plate is transferred to the workpiece. Lapping plate dia from 300mm to 1500mm available.
Roll forming machine Roll forming is a continuous metal forming process which bends or (forms˜ sheets, strips or coiled stock into predesigned shapes or profiles by passing the metal between successive pairs of rolls that increasingly (gradually) shape it till the desired cross section is achieved, thereby adding strength and rigidity to light weight metals. Except for a slight thinning of the metal at the bend radius, the metal thickness does not get altered. Almost any material that can be formed to the desired radius at room temperature can be roll-formed. The more ductile the material, the better it will form. This process can handle ferrous, non-ferrous, hot rolled, cold rolled, polished, plated or pre-painted materials as well. Metals as thin as 0.127 mm and as thick as 19 mm can be roll formed depending on the machinery. Normally cross sectional tolerances from +/- 0.25 mm to +/- 0.78 mm can be achieved but if better tolerances are enquired, a material that is amenable to such tolerance should be chosen.
Wire forming machines Production rates of 100 pieces minute and more can be achieved
Ball flashing machine
Supplier: Machine tools, double disc grinders, flat lapping machines, gauging & sorting machines, steel ball manufacturing plant, roll forming machines
