1, This machine consisted by the host pulping mechanism , worm wheel feeding mechanism, bearing, coupling and base version. 2, This machine is fixed on the two fixed abrasive discs of mill shell body and stator feed tray and installed on the rotor positioning plate of two rotor abrasive discs to form two grinding area. 3, Pulp passes through by the tube of the grinding shell body and the stator into the heart of the two grinding area, under the action of centrifugal force and slurry pressure through the grinding zone, after grinding zone tooth plate extrusion, complete the beating process, pulp out from mouth. 4, The rotor positioning plate connected to the main shaft with spline floating, as a flexible axial movement. 5, The grinding clearance is adjusted for the manual, through the worm gear transmission inspires wire mother rotates, the stator feed screw driven plate make the corresponding axial movement, makes the grinding area clearance change, grinding clearance and pressure to meet the process requirements, pressure current is the disc?s instructions. 6, It takes the elastic cylindrical coupling, smooth operation. 7, The disc material is wear-resistant alloy cast iron, all by grinding. Instruction: It is main equipment to make coarse and pure pulp. It is used to regrind pulp dross and recycle paper, high efficiency and less eletricity consumption. Feature It is suitable for continuous refining chemical,mechanical,and waste paper pulp under the consistency of 3%-5.5%.It is idea pulp beating equipment.
Description of Refiner 1.Double Disc refiner is used for continuous refining each kind of paper pulp ,straw ,wood,reed,bamboo,rags and waste paper pulp. 2.The equipment is mainly used for coarse beating, refining and re-pulping of broke and waste paper. 3.It is available for long fiber pulp such as cotton, wood and hemp. 4.The equipment is furnished with automatic control system and can beat with constant power or constant energy consumption. 5.The beating effect is stable.
Supplier: Clutch disc , pressure plate
Buyer: Steel
1. Strong Point Disc Thickener is maninly used for the low consistency stock thickening. The water log installation height is not needed. It can replace traditional gravity cylinder thickener. In the same floor space, the throughout of the gravity disc thickener is serval times more than that of the gravity cylinder thickener, so a lot of space and power can be saved. 2. Performance and Working Principle The pulp at consistency of 0.8-1.2% enters the vat and attached the disc sector, filtrate is guided by hollow shaft and discharged out at two end. Stock attached on sector is knocked off by high-pressure shower. The thickened stock at consistency of 3-4% flow over the plate of adjusting valve and into discharge chamber where it is out feed. The rotation speed of main shaft can be adjusted for required outlet consistency and capacity. 3. Strong Point Thickening of broke or washing of low consistency pulp systems; Compact design; Variable speed drive, very low power consumption
This series of machine are suitable for wood chips preparation in the paper pulp, and wood-based panel industries, as well as the chip production bases, by which logs and small wood are cut into high quality chips with even length, smooth chip cut and uniform chip thickness. It is also possible for the chipping of branches and twigs, as well as planks, etc. The chipper consists of frame, knife disc, feed and discharge spout, hood and electrical control system, etc.
Product Description automatic discharging separator is special equipment for oil and fat refining, it has the traits as high rotating speed, operating stability, completely sealed up of the inlet and outlet system, lower noist and fine separating affection. Centripetal pump system designed by our professional designer has the traits as stability outlet pressure, large regulating sphere and operating easily. Also this series separator has professional automatic domination case with safety protection device, advanced automatic vibrating testing instrument can view vibrating testing instrument can view vibrating number at any time. We can make separating and discharing to the best affection from regulate separting parameter directly at the screen. Solids-retaining centrifuges for separating water and particles from mineral oils such as fuel and lubricating oils, compressor oils, hydraulic, running in and metal working oils designed to handle oil flows from 4 to 38 gallons per minute. Water and particle free oil is essential for the quality of most processes. Complete range of separators If you are interested, you can contact me! Owen
Specifications twindisc, supporting disc Rieter R20 R40 air-spinning series spare part outstanding quality homogeneity competitive price twindisc, supporting disc -------------------------------------------------- We also produce the following types' twin disc: 1, R20 standard type, R40 magnetic type, R40 standard type; RU11, RU04, RU14 standard types; 2, SE8 standard type, SE8 laser type, SE8 reflector type; SE9 standard type, SE9 laser type, SE9 reflector type; SE10 standard type, SE10 laser type; SE11 standard type, SE11 laser type; SE12 standard type, SE12 laser type; ---------------------------------------------------- Product Characteristics: 1, the working surface is imported special polyurethane, with the outstanding abrasion resistance. 2, the metal bone material is YL12 bar, processed by precision CNC Equipments, with the fine quality homogeneity and the stable dynamic postural stability. 3, the high tearing resistance of the special polyurethane, reduce the risk of cracking and peeling in the high-speed operation. Machine Model& Specification: Machine Model OD (mm) Inside hole Dia. (mm) Model Names RU11 69.8 11 Rieter RU11(4603) RU14 69.8 11 Rieter RU14(4604) R20 69.8 11 Rieter R20 R40 78 10 Rieter R40 SE7 69.8 11 Schlafhorst Autocoro SE7 SE8 69.8 10 Schlafhorst Autocoro SE8 SE9 78 10 Schlafhorst Autocoro SE9 SE10 78 10 Schlafhorst Autocoro 288 SE11 78 10 Schlafhorst Autocoro 312 SE12 78 10 Schlafhorst Autocoro 360
The input voltage: 220 v Output power: 750 w The spindle speed: 1400 r/min Function:This machine is mainly used for soft material processing and polishing, such as amber, jade, green gold, etc. and using a small flat, suitable ditch sieve plate which is make the process faster, not easy deformation and high yield, especially for gem can't polish.
Suitable for locking parts, sewing machine accessories, meter posts,power tool accessories, pneumatic accessories, locks. Equal parts of synchronous processing, fast, product uniformity is good,suitable for mass production. Micro-computer PLC human-machine interface, photoelectric detection. Automatic feeding, automatic drilling, automatic chamfering, automatic tapping, automatic slotting, automatic milling, automatic assembly. No material automatic alarm, torque automatic control, high accuracy, fast speed, 15-30 per minute.
