This is our 17 inch Triple Disc refiner Disc with conventional Ready to Fit design. In this we gave 4 mm rib width. We are using High Quality Raw material which leads to Increases the Strength and Durability of Refining Disc.Our discs are as per our customer needs. Depending upon their raw material, we are providing them best material composition.
1, This machine consisted by the host pulping mechanism , worm wheel feeding mechanism, bearing, coupling and base version. 2, This machine is fixed on the two fixed abrasive discs of mill shell body and stator feed tray and installed on the rotor positioning plate of two rotor abrasive discs to form two grinding area. 3, Pulp passes through by the tube of the grinding shell body and the stator into the heart of the two grinding area, under the action of centrifugal force and slurry pressure through the grinding zone, after grinding zone tooth plate extrusion, complete the beating process, pulp out from mouth. 4, The rotor positioning plate connected to the main shaft with spline floating, as a flexible axial movement. 5, The grinding clearance is adjusted for the manual, through the worm gear transmission inspires wire mother rotates, the stator feed screw driven plate make the corresponding axial movement, makes the grinding area clearance change, grinding clearance and pressure to meet the process requirements, pressure current is the disc?s instructions. 6, It takes the elastic cylindrical coupling, smooth operation. 7, The disc material is wear-resistant alloy cast iron, all by grinding. Instruction: It is main equipment to make coarse and pure pulp. It is used to regrind pulp dross and recycle paper, high efficiency and less eletricity consumption. Feature It is suitable for continuous refining chemical,mechanical,and waste paper pulp under the consistency of 3%-5.5%.It is idea pulp beating equipment.
TN860 Nutating Disc Meter is good up to 60 GPM and 150 PSI. This meter is excellent for ALS, BioDiesel, Fuel Oil No 2 and Kerosene. Dependable and rugged, these meters are ideal for non-custody transfer applications such as inventory control of refined petroleum products and non-corrosive chemicals. Anodized Aluminum Meter 6.0 - 60 GPM (23-230 LPM) Up to 150 PSI (10 BAR) 1-22 cSt viscosity Fluorocarbon seals standard Gallon or liter readout 10:1 turndown +/-2% Linearity +/-0.5% Repeatability 1.5 NPT or BSPT
