NAP-66A is mainly used for gas detectors and leak testers. NAP-66A is a half in height and needs a half in power consumption compared to existing sensor so that thinner and lighter-weight detectors can be produced. The following are the basic characteristics but it is recommended to refer to the individual users manual for further information. * Target gases and concentration Propan(C3H8): 0.03~ 2.2% (0.03~ 1%) Iso-butane(Iso-C4H10): 0.03~ 1.8% (0.03~ 0.8%) Hydrogen(H2):0.05~ 4% (0.05~ 1.5%) Ethanol(C2H5OH): 0.05~ 3.2% (0.05~ 1.5%) Hydrocarbons(CnH2n+2): 1~100% LEL (1~50%LEL) ( ) is a detection range in high accuracy * Ratings Supply Voltage: DC 2.0 ± 0.2V AC 2.0 ± 0.2V (r.m.s. 50~60Hz) Current (When 2.0V is applied): DC 140 ~ 160mA AC 140 ~ 160mA (r.m.s. 50~60Hz) Ambient Temperature: In operation -10 ~ +50 In storage -10 ~ +50 Ambient humidity: In operation 95ï¼?RH or less In storage 99ï¼?RH or less (No dew condensation)
FUJI developed the first infrared gas analyzer in Japan to use mass-flow sensors. Since then, we have supplied customers with various types of gas analyzers to support environmental preservation and control efforts. These efforts include measurements of atmospheric pollution and detection of low density of SOx and NOx, generated by incinerating facilities and boilers. FUJI's gas analyzers are widely used to monitor the atmosphere to help maintain a cleaner natural environment.
NAP-57A Catalytic Type Gas Sensor Description NAP-57A is a newly developed catalytic type gas sensor based on conventional type NAP-56A for not only residential but also commercial or semi-industrial applications because of having highly excellent poisoning resistivity. Since its power consumption and pin positions are completely the same as NAP-55A and 56A, it is easily replaceable as it is. However, it does not possess the explosion proof by itself, then it is recommended to install it into an explosion proof chamber for actual application. NAP-57A Catalytic Type Gas Sensor Features * Good stability * Excellent repeatability and detection accuracy * Good linearity against gas concentration at wide range * Quite excellent poisoning resistivity * Down sizing for design flexibility of gas alarm or detector NAP-57A Catalytic Type Gas Sensor Usage * Gas alarm or detector of general combustible gases for all applications * Gas densitometer * Driving module for gas leakage detector
Description: Nap-56a is not made with thermoplastics to achieve a higher temperature Resistivity. The pin locations and dimensions are compatible to nap-55a for the Convenience of current users of nemoto nap-55a. The gas sensitivity is better Than nap-55a by about 15%. Users are to pay attention to this higher gas Sensitivity upon calibration. Target gases and concentration Gasesdetection range Methanech40.05 - 5% (0.05 - 2%) Ethanec2h60.05 - 3.2%(0.05 - 1.5%) Hydrogenh20.05 - 4% (0.05 - 1.5%) Hydrocarbonscnh2n+21 - 100%lel (1 - 50%lel) ( )is a detection range in high accuracy Gas sensitivity characteristics Gas & concentrationoutput voltage Output in clean air-35 - +35 mv Methane 3, 000 ppm15 - 23 mv Iso-butane 1, 400 ppm12 - 18 mv Hydrogen 1, 400 ppm10 - 17 mv Ratings Itemsratings Supply voltagedc 2.5±0.25v Ac 2.5±0.25v(r.M.S. 50-60hz) Current (2.5v supplied)dc 150 - 170ma Ac 150 - 170ma(r.M.S. 50-60hz) Ambient temperaturein operation -10 - +50°c In storage -10 - +50°c Ambient humidityin operation 95%rh or less In storage 99%rh or less(no dew condensation)
We design and produce different burners for flammable gas use, like nature gas, coke oven gas etc.
Propane: 85% min. by liquid volume Propylene: 5% max. by liquid volume Butane & heavier HC: 2.5% max. by liquid volume Sulfur: 120 ppm max. by weight LPG stands for liquefied petroleum gas, also known as propane or butane. It is a flammable hydrocarbon gas that is commonly used as fuel for heating and cooking in homes, as well as for industrial applications, transportation, and agriculture. LPG is a byproduct of crude oil refining and natural gas processing. It is a mixture of propane and butane gases, which are liquefied through pressurization and cooling. LPG is stored and transported in pressurized tanks and cylinders as a liquid, but when released into the atmosphere, it vaporizes into a gas. LPG is a versatile fuel that has many advantages over other fossil fuels. It is clean-burning and produces fewer emissions than gasoline or diesel, making it a more environmentally friendly fuel option. It is also highly efficient, as it has a high energy content per unit volume, and can be easily transported and stored in liquid form. LPG is widely used around the world, particularly in areas where natural gas pipelines are not available or where electricity is unreliable or expensive. It is commonly used in households for cooking and heating, and in vehicles as an alternative fuel to gasoline or diesel. LPG is also used in industrial applications such as manufacturing, agriculture, and chemical processing.
Grinding Millstone industry as an adhesive (binder) Chemicals desiccant for air drying (as moisture absorbent) Textile & Polymer Industry (as catalyst of resin finishing) Fire retardants in material coating & production of non-flammable material De-icing & removing the ice from roads after snowfall) Dust Control (as moisture absorbent in mining Oil & Gas industry / drilling construction sites, roadsides, parks, parking areas, airports etc.
Capillary cable is composed of a submersible power cable and a continuous stainless steel composite pipe. Diluent chemicals are injected into oil and gas Wells through composite pipes to make heavy oil Wells easier to recover. The injection of descaling chemical agent can effectively remove the oil pipe scaling. Sensors can be connected to collect downhole temperature, pressure, liquid level and other well parameters; The valve can be connected to the downhole safety valve and the wireline packer vent valve, and controlled on and off by surface pressure.
Mine detection cable is mainly used in various oil and gas Wells with Oil well wax removal, viscosity reduction and coagulation reduction, coring and well logging, perforation etc., can also be used in ocean research and river, harbor, water conservancy hydrological measurement, as well as coal field geological prospecting, geothermal well logging, etc.,The detection cable is connected with the sensor and the signal terminal, which has a strong anti-interference signal transmission function.
Ethylene is a colorless and flammable gas with the chemical formula C2H4, representing one of the simplest hydrocarbon compounds with a double bond between carbon atoms. It is a natural plant hormone responsible for regulating various growth and developmental processes in plants, including ripening and flowering. Ethylene has significant industrial importance, as it is widely used in the production of plastics, particularly polyethylene, which is one of the most commonly used plastics worldwide. It also finds application in the chemical industry for the synthesis of various organic compounds. Ethylene's dual role in plant biology and industrial chemistry highlights its importance in both the natural world and human technology.
Nap-50a is a miniature & low power consumption type sensor. Nap-50a is Mainly used for gas detectors. Compared to nap-55a, nap-50a has a lower Alcohol sensitivity to eliminate false alarms caused by alcohol, thus more reliable Gas detectors can be produced with nap-50a. The following are the basic Characteristics but it is recommended to refer to the individual user’s manual for Further information. See nap-66a for measuring circuit for sensor evaluation. Target gases and concentration GasesDetection range MethaneCh40.05 - 5% (0.05 - 2%) EthaneC2h60.05 - 3.2% (0.05 - 1.5%) HydrogenH20.05 - 4% (0.05 - 1.5%) HydrocarbonsCnh2n+21 - 100%lel (1 - 50%lel) ( )is a detection range in high accuracy Gas sensitivity characteristics Gas & concentrationOutput voltage Output in clean air-35 - +35 mv Methane 3, 000 ppm10 - 16 mv Hydrogen 1, 400 ppm7 - 12 mv Ethanol 1 %Less than 10 mv Ratings ItemsRatings Supply voltageDc 2.5±0.25v Ac 2.5±0.25v(r.M.S. 50-60hz) Current (2.5v supplied)Dc 150 - 170ma Ac 150 - 170ma(r.M.S. 50-60hz) Ambient temperatureIn operation -10 - +50°c In storage -10 - +50°c Ambient humidityIn operation 95%rh or less In storage 99%rh or less(no dew condensation)
Flexible fireproof cables are composed of copper stranded wires, mineral compound insulation, and mineral compound sheaths. This kind of cable has non-combustible, smoke-free, non-toxic and fire-resistant characteristics. The structure of the flexible mineral insulated cable adopts a flexible structure and materials that are made of mineral compounds, which make up for the defects of hard structure, flammability, and toxicity. It also has some advantages that other cables cannot have, such as: fire resistance, large current carrying capacity, Impact voltage resistance, mechanical damage resistance, halogen-free, non-toxic, explosion-proof, waterproof, corrosion resistance, long life, safety, overload resistance, high temperature resistance, low cost, etc. Flexible fireproof cables have an important role in protecting lives, materials, and information security. They are used in trunk lines, fire lines, escape rescue systems, such as emergency lighting, fire monitoring, alarm systems, elevator systems, smoke exhaust systems, and control lines, etc. Flexible fireproof fireproof cables used in trunk lines, fire lines, escape and rescue systems, such as emergency lighting, fire monitoring, alarm system, elevator system, smoke exhaust system, and control lines, etc. Flexible fireproof fireproof cables used in Public buildings: high-rise buildings, underground buildings, hotels and restaurants, hospitals, schools, business centers, government affairs centers, department stores, large supermarkets, logistics warehouses, financial institutions such as banks, securities and insurance, post and telecommunications centers, power control rooms, substation rooms, museums, memorials and other historic buildings. Flexible fireproof fireproof cables used in Infrastructure: airport terminals, stations, hub centers, ports, subway systems, Bridges, tunnels. Flexible fireproof fireproof cables used in Industry: coal mining, coal chemical industry, oil field mining, petrochemical industry, oil refinery, metallurgical industry, iron and steel industry, shipbuilding industry, aerospace, electric power industry, pharmaceutical industry, glass industry, paper industry, military system. Flexible fireproof fireproof cables used in Fire prevention, explosion prevention, high temperature places: oil depot and gas station, natural gas transmission and compression station, garden landscape, historic sites, wood structure buildings
Performance Sensitivity na/ppm at 2ppm co 420 to 650 Response time t90 (s) from zero to 10ppm co < 25 Zero current na in zero air at 20°c +30 to -130 Noise* ±2 standard deviations (ppb equivalent) 4 Range ppm limit of performance warranty 1000 Linearity ppb co error at full scale, linear at zero, 500ppm co 20 to 35 Overgas limit maximum ppm for stable response to gas pulse 2000 * tested with alphasense isb low noise circuit Environmental Sensitivity @ -20°c (% output @ -20°c/output @ 20°c) @ 5ppm co 40 to 70 Sensitivity @ 50°c (% output @ 50°c/output @ 20°c) @ 5ppm co 110 to 125 Zero @ -20°c na -30 to +30 Zero @ 50°c na -50 to -200 Cross sensitivity Filter capacity ppm·hrs h2s 250, 000 H2s sensitivity % measured gas @ 5ppm h2s < 1 No2 sensitivity % measured gas @ 5ppm no2 < 1 Cl2 sensitivity % measured gas @ 5ppm cl2 < 1 No sensitivity % measured gas @ 5ppm no < -3 So2 sensitivity % measured gas @ 5ppm so2 < 0.1 H2 sensitivity % measured gas @ 100ppm h2 at 20oc < 10 C2h4 sensitivity % measured gas @ 100ppm c2h4 < 1 Nh3 sensitivity % measured gas @ 20ppm nh3 < 0.1 Key temperature range °c -30 to 50 Specifications Pressure range kpa 80 to 120 Humidity range % rh continuous 15 to 90 Storage period months @ 3 to 20°c (stored in sealed pot) 6 Load resistor o (isb circuit is recommended) 33 to 100 Weight g < 13 Isweek provide smoke, gas, humidity&temperature, uv, fluid or other kinds of sensors More details welcome to inquiry: skype:isweek_laura
Propylene carbonate (molecular formula: C4H6O3) is a colorless, odorless, flammable liquid. Miscible with ether, acetone, benzene, chloroform, vinyl acetate, etc., soluble in water and carbon tetrachloride. It has a strong ability to absorb carbon dioxide and is stable in nature. In industry, it is obtained by adding propylene oxide and carbon dioxide under a certain pressure, and then distilling under reduced pressure. It can be used as oily solvent, spinning solvent, olefin, aromatic hydrocarbon extractant, carbon dioxide absorber, dispersant for water-soluble dyes and pigments, etc. Application 1. It can be used as an excellent medium for high-energy batteries and capacitors in the electronics industry. 2. In the polymer industry, it can be used as a solvent and plasticizer for polymers. 3. Used as a plasticizer for adhesives and sealants. 4. It can also be used as a phenolic resin curing accelerator and a dispersant for water-soluble adhesives, pigments and fillers. 5. The chemical industry is the main raw material for synthesizing dimethyl carbonate. It can also be used to remove carbon dioxide and hydrogen sulfide from natural gas and petroleum cracking gas. 6. It can also be used in textile, printing and dyeing and other industrial fields.
Flame-retardant textile fabrics are specially designed materials that have undergone treatment to reduce their flammability. These fabrics are engineered to withstand exposure to flames or high temperatures, effectively slowing down the spread of fire and reducing the risk of ignition. These fabrics find extensive use in various industries and applications where fire safety is critical, such as: 1.Industrial Settings: Used in protective clothing for workers in industries like oil and gas, mining, and chemical processing where there is a risk of fire or thermal hazards. 2.Public Spaces: Utilized in public transportation (like trains and airplanes) and public buildings (such as theaters and hotels) to meet fire safety regulations and protect occupants. 3.Home Furnishings: Used in curtains, upholstery, and bedding to enhance fire safety in residential settings. Flame-retardant textiles are typically treated with chemical agents during manufacturing or finished with inherently flame-resistant fibers like modacrylic, aramid, or certain polyester blends. These fabrics undergo rigorous testing to meet industry standards and regulations for fire safety.
Short Description: CR -6062 Industrial grade fuel level transmitter (fuel level sensor) is a special instrument tailored for the accurate measurement of fuel level such as railway locomotive, automobile fuel tank, tank truck and fuel depot. The whole machine does not have any movable or elastic parts, and is resistant to impact, easy to install, high in reliability, high in precision, and good in performance and price. It can be installed in various occasions to accurately measure and control the fuel level of gasoline, diesel fuel and hydraulic fuel. It is also suitable for the measurement of various non-conductive liquids. Such products can also be used to measure conductive media in the case of particularly harsh on-site conditions, particularly severe electromagnetic interference, and particularly high agitation. Detection range: 0.05 -5m Accuracy: 0.1, 0.2, 0.5 Pressure range: -0.1MPa-32MPa Probe temperature resistance: -50 -250 Output signal: 4-20mA, 4-20mA superimposed HART communication, 485 communication, CAN bus communication Power supply voltage: 12-28VDC (Intrinsically safe type needs to be powered by safety barrier) Fixing method: Thread mounting M20�1.5,M27�2,M18�1.5,M16�1 Flange mounting DN25, DN40, DN50. Special specifications can be customized according to requirements Probe diameter: Φ 12 , Φ 16 , Φ 25 Explosion-proof grade: Intrinsic Exia II CT6 Explosion-proof Exd II CT5 Protection level: IP65 Intrinsic safety parameters: Ui : 28VDC , Ii : 93mA , Pi : 0.65W , Ci : 0.042uf , Li : 0mH CR -6062 industrial grade fuel level transmitter (fuel level sensor) for occasions CR -6062 Standard Fuel Level Transmitter (Fuel Level Sensor) Industrial grade, suitable for measurement of viscous fuel quality below 5MPA and temperature below 200, can be connected with various protocols CR -6062 Compact fuel level transmitter (fuel level sensor) Industrial grade, suitable for measurement below 5MPA, temperature less than 200, low viscosity fuel, can be connected with various protocols