Cv7-E Ultrasonic Wind Speed Sensor

CV7-E Ultrasonic Wind Speed Sensor Description
The CV7-E is easily integrated into measurement and monitoring systems. Detects gusts with great responsiveness and low latency. The CV7-E is powered by 8-30 VDC power supply and it outputs RS232 / RS422 / 5 V level signal / NMEA0183.

The CV7-E shows a data rate twice faster than the CV7 and CV7-V with a data output 4 per second.
The small size of this sensor makes it very discreet.
Like every LCJ Capteurs products, CV7-E is energy efficient.

CV7-E has proved its value with universities â??laboratories, scientific and wind tunnels successful tests.

It can be used connected to a PC and to any system featuring a NMEA® input port.

CV7-E Ultrasonic Wind Speed Sensor Specification:
* Output rate: 4 Hz / 60 Hz measurement
* Wind module sensitivity: 0.12 m/s
* Wind module resolution: 0.05 m/s
* Wind module dynamic: 0.12 to 40 m/s
* Direction sensitivity: +/-1.5 degree
* Direction resolution: 1 degree
* Power supply: 8 V to 30 V DC
* Electrical consumption: 9 mA
* Op. temp. without icing: -15 degree C to +50 degree C

-

The cv7 range of products features lateral transducers delivering four independent measurements. The validity checks are used to measure head wind vectors for calculations. This method gives a wind speed sensitivity of 0.15 m/s, and reliability and excellent linearity up to 40 m/s.

Cv7-v ultrasonic wind speed sensor specification:
Output data format: nmea0183; mwv, xdr
Information transmited: instant. W. Speed, instant. W. Angle, avaibility
Output rate: 2 hz / 30 hz measurement
Wind module sensitivity: 0.12 m/s
Wind module resolution: 0.05 m/s
Wind module dynamic: 0.12 to 40 m/s
Direction sensitivity: +/-1.5'
Direction resolution: 1'
Power supply: 8 v to 30 v dc
Electrical consumption: 9 ma
Op. Temp. Without icing: -15'c to +55'c
Cable: 25 m / 4x0.22 mm2
Connection: 4 wires
Weight of the head: 100 gr
Weight of unit assembly: 200 gr with mounting part
Mounting: vertical ; 300 aluminium arm, 16 mm

CV7-OEM Ultrasonic Wind Speed Sensor Description
CV7-OEM shows the same features as the CV7 standard: light, compact and low energy consumption.

With this OEM version of the Static Wind Transducer CV7, you can add an accurate Ultrasonic Wind Sensor to your own products and installations. It is powered by 8-30 VDC power supply and it outputs RS232/RS422/NMEA0183 signal.

CV7-OEM Ultrasonic Wind Speed Sensor Specification:
* Output rate: 2 Hz / 30 Hz measurement or *4 Hz / 60 Hz meas.
* Wind module sensitivity: 0.12 m/s
* Wind module resolution: 0.05 m/s
* Wind module dynamic: 0.12 to 40 m/s
* Direction sensitivity: +/-1.5 degree
* Direction resolution: 1 degree
* Power supply: 8 V to 30 V DC
* Electrical consumption: 9 mA
* Op. temp. without icing: -15 degree C to +55 degree C

-

CV7-V Ultrasonic Wind Speed Sensor Description
The CV7 is easily integrated into measurement and monitoring systems. The CV7-V is powered by 8-30 VDC power supply and it outputs RS232/RS422 (5V level signal) / NMEA0183.

CV7-V Ultrasonic Wind Speed Sensor Application
Static wind sensor
A conventional wind vane/anemometer features mechanical rotating parts. These moving parts expose the sensor to failure.
CV7 series was extensively tested in Marine applications for both precision and robustness.

Configurable wind sensor
CV7-V can be programmed and configured for : angle correction, smoothing time constant, units of measurement and interface format.

CV7-V connexion
CV7-V can be used connected to a PC and any systems featuring an NMEA® input port and specific pieces of equipment using conventional formats.
In PC mode, this bidirectional sensor can be set up for angle correction, damping, measure units and interface format.

Quality
All LCJ Capteurs are designed and manufactured in the Nantes region in France where they are fully tested throughout the manufacturing process.

CV7-V Ultrasonic Wind Speed Sensor Specification:
Output data format: NMEA0183; MWV, XDR
Information transmited: Instant. W. Speed, Instant. W. Angle, avaibility
Output rate: 2 Hz / 30 Hz measurement
Wind module sensitivity: 0.12 m/s
Wind module resolution: 0.05 m/s
Wind module dynamic: 0.12 to 40 m/s
Direction sensitivity: +/-1.5 degree
Direction resolution: 1 degree
Power supply: 8 V to 30 V DC
Electrical consumption: 9 mA
Op. temp. without icing: -15 degree C to +55 degree C
Cable: 25 m / 4x0.22 mm2
Connection: 4 wires
Weight of the head: 100 gr
Weight of unit assembly: 200 gr with mounting part
Mounting: Vertical ; 300 aluminium arm, 16 mm

Our most advanced intelligent spot detectors, multi-criteria/multi-sensor devices use multiple sensors to detect various conditions in an environment sensing a wider range of fires with greater accuracy.

Features & Benefits:

Multi-Criteria/Multi-Sensor smoke detection
Unique ability to detect major elements of a fire
Highest nuisance alarm immunity
Advanced algorithms interpret and respond to multiple inputs

Sonic-anemo-sdi ultrasonic wind speed sensor description
Sonic-anemo-sdi is made from the cv7-v to which a sdi12 protocol and optimizing electrical consumption has been added. Sample rate is 2 hz.
This ultrasonic wind sensor operates in a request-response mode.
This product is more energy-efficient than standard units.
The sonic-anemo-sdi is dedicated to meteorological applications.

Sonic-anemo-sdi ultrasonic wind speed sensor available data:
- average speed and direction over 10 minutes
- minimum wind speed and direction for that period
- maximum wind speed (gust 3s) and direction for that period
- software version and serial number
- data measurement quality rate from the sensor
- data for sensor diagnostic (manufacturer use only)

Sonic-anemo-sdi ultrasonic wind speed sensor specification:
* output data format: sdi-12 v1.3
* information transmited: inst. W. Speed, w. Angle, gust ws/wa, avg, min, max, avaibility
* output rate: 2 hz / 30 hz measurement
* wind module sensitivity: 0.12 m/s
* wind module resolution: 0.05 m/s
* wind module dynamic: 0.12 to 40 m/s
* direction sensitivity: +/-1.5'
* direction resolution: 1'
* power supply: 2.7 v to 35 v dc
* electrical consumption: 2.9 ma avg. @ 12 v
* op. Temp. Without icing: -15'c to +55'c
* cable: 5 m / 3 x 0.22 mm2 uv proof
* connection: 3 wires
* weight of unit assembly: 200 gr with mounting parts.

Sonic-anemo-dzp ultrasonic wind speed sensor description:
Sonic-anemo-dzp ultrasonic anemometer is powered by its own solar panel. It is well suited to remote installations where power consumption matters. This unit connects directly to a pulse or potentiometer input (i.E. On davis instruments). It is a useful product for professionals, integration to aws (autonomous weather station), and well-informed users.

Sonic-anemo-dzp ultrasonic wind speed sensor specification:
, output rate: 1 measure and update per second
, wind module sensitivity: 0.12 m/s
, wind module resolution: 0.05 m/s
, wind module dynamic: 0.12 to 40 m/s
, direction sensitivity: +/-1.5'
, direction resolution: 1' (9 bits)
, power supply: photovoltaic panel, battery lifepo4
, op. Temp. Without icing: -15'c to +55'c

SONIC-ANEMO-DVC Ultrasonic Wind Speed Sensor Description:
As Worldwide Premiere launch, a specific version of the CV7-V which connects directly to the wind sensor input on Davis instruments.

This sensor will allow the replacement of mechanical anemometers / wind vanes with no need of anything else but power supply.

Itâ??s an exclusive and useful product for both, professionals and well-informed amateurs.

SONIC-ANEMO-DVC Ultrasonic Wind Speed Sensor Specification:
* Output rat: 2 Hz / 30 Hz measurement
* Wind module sensitivity: 0.12 m/s
* Wind module resolution: 0.05 m/s (16 bits)
* Wind module dynamic: 0.12 to 40 m/s
* Direction sensitivity: +/-1.5'
* Direction resolution: 1' (9 bits)
* Power supply: 2.7 V to 35 V DC
* Electrical consumption: 2.6 mA Avg. @ 12 V
* Op. temp. without icing: -15'C to +55'C