Single row tapered roller bearing
Part no.: 30228
I.D: 140.000(mm)
O.D: 250.000(mm)
Width: 45.750(mm)
Width of inner ring: 42.000(mm)
Width of outer ring: 36.000(mm)
Chamfer of cone: 4
Chamfer of cup: 3
Basic dynamic load rating: 439 kn
Basic static load rating: 627kn
Limited speed (rpm): 1512(grease)/2090(oil)
Gross weight: 8.8kg
Part number Jp12049/jp12010 Hm124646-ass90085 Hm127446-ass90093 Hm129848/hm 129814 Hm133444-90107 Jp14049/10 161400/ee161850 L163149-90051 L183448/10 L183449/10 Hh221430/221410 Hh221442/hh221410 Hh221449/hh221410 Hh224340/224310 M224748/m224710 Ll225749/ll225710 L225810 / l 225849 Hh228340/310 Hh228349/hh228310 Hm231132/hm231110 Hm231149 90096 M231649/10 Hh234048/hh234010 M236849/m236810 Hm237545/10 H238148/h238110 M238849/m238810 Hm231149/hm231110 M236845/m236810 H239640/h239610 Lm241149/lm241110 M241547/10 242649/242610 M244249/10 Ll244549/ll244510
Single row tapered roller bearings are able to harness both radial and axial forces. The axial load capacity depends on the degree of the contact angle. These parts are able to control the axial load in one direction only and that is wht they are assembled in pairs. The axial clearance or preload designated in these pairs of bearings is to be adjusted during assembly. The amount of the axial clearance or preload is determined according to the following criteria: operating conditions, the size and type of the roller beaings, and the specific requirements of the mating arrangements rigidity.
Single row tapered roller bearings are designed to carry combined loads, i.e. radial and axial loads acting simultaneously. The projection lines of the raceways intersect at a common point on the bearing axis to provide true rolling action and therefore have low frictional torque during operation. The axial load carrying capacity of a tapered roller bearing increases with increasing contact angle ±. The size of the contact angle, usually between 10 and 30, is related to the calculated coefficient e: the higher the value of e, the higher the contact angle.
Single Row Tapered Roller Bearing 32940 Inner Ring: 200.000mm Outer Ring: 280.000mm Width: 51.000mm Width of Inner Ring: 51.000mm Width of Outer Ring: 39.000mm Chamfer of Inner Ring: 3mm Chamfer of Outer Ring: 2.5mm Basic Dynamic Load Rating: 460KN Basic Static Load Rating: 950KN Limited Speed (rpm): 950(grease)/1300(oil) Gross Weight: 9.5kg Tapered roller bearings have tapered inner and outer ring raceways between which tapered rollers are arranged, optimizing rolling conditions. Tapered roller bearings are utilized in applications where there is a combination of radial and axial (thrust) loads. Tapered roller bearings are separable and have the following components: outer ring, inner ring, and roller assembly (containing the rollers and a cage). The non-separable inner ring and roller assembly is called the "cone", and the outer ring is called the "cup". Internal clearance is established during mounting by the axial position of the cone relative to the cup. It is important to note that tapered roller bearings are predominantly sold as individual components. Therefore, it is important to know the part number of both the cup and the cone, as they will most often differ and there are often many cup/ cone combinations available. While feasible to replace only the cup or the cone when replacing a tapered roller bearing, it is not recommended as it greatly decreases bearing life. Tapered roller bearings are used in numerous applications and are capable of high loads and speeds. The predominant use is in any wheel application, where the tapered roller bearings are normally arranged in back to back pairs where they support axial and radial loads in both directions. Tapered roller bearings are available in a wide array of both inch and metric sizes.
Single Row Tapered Roller Bearing 30226 Inner Ring: 130.000mm Outer Ring: 230.000mm Width: 43.750mm Width of Inner Ring: 40.000mm Width of Outer Ring: 34.000mm Chamfer of Inner Ring: 4mm Chamfer of Outer Ring: 3mm Basic Dynamic Load Rating: 387KN Basic Static Load Rating: 539KN Limited Speed (rpm): 1620(grease)/2200(oil) Gross Weight: 7.02kg Single row tapered roller bearing can support a combined radial and axial load. If either a radial load or bi-directional axial load is to be carried, a pair of bearings must be used in a "face-to-face" or "back-to-back" mounting. The axial load carrying capacity of the bearings is largely determined by the contact angle. If the contact angle is larger, then the axial load carrying capacity is higher and vice versa. During equipment assembly, single row bearings can be set to the required clearance (endplay) or preload condition to optimize performance.
- Material: 100Cr6, SKF3, GCr15, SKF3S; - Technical: Seamless , Process: Piercing, Cold Drawing, Spheroidizing Annealing, Annealing etc.; - Size Range: OD 10 ~ 160 mm, Wall thickness: 1~ 25 mm; Length: Customized; - Delivery Condition: (1) +C No heat treatment after the final cold drawing process, (2) +LC After the final heat treatment there is a suitable drawing pass,(3) +SR After the final cold drawing process there is a stress relieve heat treatment in a controlled atmosphere, (4) +A After the final cold drawing process the tubes are annealed in a controlled atmosphere, (5) +N After the final cold drawing operation the tubes are normalized in a controlled atmosphere; - Application: Widely Used in Bearing Industry and Automotive Parts, such as Hydraulic Cylinder Pipe, Steel ball, roller and collar of large machinery bearing, axis of rotation, blade, stator pump, profiling, sleeve, mandril, etc.; - Features: High and uniform hardness and wear resistance, and high elastic limit.
Airatrex Has Rapidly Established Itself As A Strong, Reliable And Trustworthy Supplier For Wide Range Of Bearings. Ideally Suited To The Engineering, Maintenance And Manufacturing Markets Ball Screw Support Barrel Roller Bearings Cam And Roller Follower Crossed Roller Bearings Cylindrical Roller Bearing Deep Groove | Radial Ball Bearings Double Row Angular Contact Double Row Self Aligning Linear Bearings Plummer Blocks
Part number Ee113091-113171d + entretoise xis 113089 Hm120848-90088(hm120848/hm120817dß) Hm124646-90056(hm124646/hm124618d) Hm127446-90048ß(hm127446/hm127415dß) Ee128111+ee128160cd+spacer x2s-128111bep 0.0200" Ee128160cd and one spacerx2s-128111ßß Hm129848/hm129814d Na130902/131401d Ee134102/134144d Ee161400/161901cd 161400d/161901/161901cd/x1s-161400 161901cd or dß/ßee161300ßßßßß L163149/l163110d xe spacer L163149/l163110cd L163110cd/l163149 Ee170950/171451cd Ee192150/192201d Hh221449/hh221410d Hh224346na/hh224310d M224749/710d Hm231149/11cd M231649d902a9ßßß M231649d assy 902a7 Hm237535510cd Hm237545na/510cd Hm237546d/hm237510 H239640/h239612cd H239649/239612cd Lm241149nw/lm241110d Normal industrial packing