Tapered Roller Bearing-Single Row

Single row tapered roller bearings are able to harness both radial and axial forces. The axial load capacity depends on the degree of the contact angle. These parts are able to control the axial load in one direction only and that is wht they are assembled in pairs. The axial clearance or preload designated in these pairs of bearings is to be adjusted during assembly. The amount of the axial clearance or preload is determined according to the following criteria: operating conditions, the size and type of the roller beaings, and the specific requirements of the mating arrangements rigidity.

Single row tapered roller bearings are designed to carry combined loads, i.e. radial and axial loads acting simultaneously. The projection lines of the raceways intersect at a common point on the bearing axis to provide true rolling action and therefore have low frictional torque during operation. The axial load carrying capacity of a tapered roller bearing increases with increasing contact angle ±. The size of the contact angle, usually between 10 and 30, is related to the calculated coefficient e: the higher the value of e, the higher the contact angle.

The tapered roller bearings mainly bear radial and axial combined loads. The bearing bearing capacity depends on the rolling angle of the outer ring, and the larger the angle, the greater the bearing capacity. This type of bearing belongs to a separate type of bearing. According to the number of columns in the roller body in the bearing, it is divided into single, double and four-row taper roller bearings. The single-row taper roller bearing clearance needs to be adjusted by the user at the time of installation. Double-row and four-row taper roller bearing clearance has been given according to the user's requirements when the product is delivered,do not need user adjustments.

Supplier: Tapered roller bearing (single row, double row, four row), spherical roller bearings, cylindrical roller bearings, special thrust bearings, other special bearings

China Tapered Roller Bearing , Metric Taper Roller Bearing, Tapered Bearing, provided Wuhan Honghao Machinery Co., Ltd1. Material: Chrome steel2. Type:A. Metric size as 30200 series, 30300 series, 32300 series, 32000 series, 31300 series, 33000 series, 33200 series, 32200 series, 33100 series etc.B. Inch-size as LM11749/LM11710, LM11949/LM11910, 39581/39520, 6386/6320, 5BC, 11BC, 09067/09195, LM102949/LM102910, LM104949/LM104911, M12649/M12610, LM12748/LM12710, LM12749/LM12710, LM29749/LM29710, LM300849/LM300811, L44649/L44610, HM218248/HM218210, L45449/L45410, LM48548/LM48510, LM501349/LM501310, LM67048/LM67010, etc.3. Grade: P0, P5,4. Notes: Tapered roller bearings with radial oriented mainly to bear radial and axial joint load. Bearing load capacity depends on the angle of the outer ring raceway, the greater the angle the greater the carrying capacity. This kind of bearing is separable bearings, rolling bearings according to the number of rows into single row, double row and four row tapered roller bearings. Single row tapered roller bearing clearance adjustment required to the user during installation; Double row and four row tapered roller bearing clearance from the factory has been given based on user requirements, users do not need to adjust.Tapered roller bearings have tapered inner and outer ring raceways, tapered roller arranged between the two. The surface of the projection lines of all cone bearing axis in the same point together. This design makes tapered roller bearings particularly suitable for bearing complex (radial and axial) loads. Most of the axial load bearing capacity is determined by the contact angle �± ; A angle increases, the higher the axial load capacity. Angle size of the computational coefficient e to represent; E greater the contact angle the greater the bearing axial load greater applicability.Tapered roller bearings are usually separated type, that is, with roller and cage assembly of the inner components of the composition of the inner cone with tapered outer (outer) installed separately.5. Application: Tapered roller bearings are widely used in automotive, mill, mine, metallurgy, plastics and machinery.6. Packing: Single colour boxes or industrial packing, carton around 22kg, then into wooden or steel pallet.

Single Row Tapered Roller Bearing 32940 Inner Ring: 200.000mm Outer Ring: 280.000mm Width: 51.000mm Width of Inner Ring: 51.000mm Width of Outer Ring: 39.000mm Chamfer of Inner Ring: 3mm Chamfer of Outer Ring: 2.5mm Basic Dynamic Load Rating: 460KN Basic Static Load Rating: 950KN Limited Speed (rpm): 950(grease)/1300(oil) Gross Weight: 9.5kg Tapered roller bearings have tapered inner and outer ring raceways between which tapered rollers are arranged, optimizing rolling conditions. Tapered roller bearings are utilized in applications where there is a combination of radial and axial (thrust) loads. Tapered roller bearings are separable and have the following components: outer ring, inner ring, and roller assembly (containing the rollers and a cage). The non-separable inner ring and roller assembly is called the "cone", and the outer ring is called the "cup". Internal clearance is established during mounting by the axial position of the cone relative to the cup. It is important to note that tapered roller bearings are predominantly sold as individual components. Therefore, it is important to know the part number of both the cup and the cone, as they will most often differ and there are often many cup/ cone combinations available. While feasible to replace only the cup or the cone when replacing a tapered roller bearing, it is not recommended as it greatly decreases bearing life. Tapered roller bearings are used in numerous applications and are capable of high loads and speeds. The predominant use is in any wheel application, where the tapered roller bearings are normally arranged in back to back pairs where they support axial and radial loads in both directions. Tapered roller bearings are available in a wide array of both inch and metric sizes.

Single Row Tapered Roller Bearing 30226 Inner Ring: 130.000mm Outer Ring: 230.000mm Width: 43.750mm Width of Inner Ring: 40.000mm Width of Outer Ring: 34.000mm Chamfer of Inner Ring: 4mm Chamfer of Outer Ring: 3mm Basic Dynamic Load Rating: 387KN Basic Static Load Rating: 539KN Limited Speed (rpm): 1620(grease)/2200(oil) Gross Weight: 7.02kg Single row tapered roller bearing can support a combined radial and axial load. If either a radial load or bi-directional axial load is to be carried, a pair of bearings must be used in a "face-to-face" or "back-to-back" mounting. The axial load carrying capacity of the bearings is largely determined by the contact angle. If the contact angle is larger, then the axial load carrying capacity is higher and vice versa. During equipment assembly, single row bearings can be set to the required clearance (endplay) or preload condition to optimize performance.

Single row tapered roller bearing Part no.: 30228 I.D: 140.000(mm) O.D: 250.000(mm) Width: 45.750(mm) Width of inner ring: 42.000(mm) Width of outer ring: 36.000(mm) Chamfer of cone: 4 Chamfer of cup: 3 Basic dynamic load rating: 439 kn Basic static load rating: 627kn Limited speed (rpm): 1512(grease)/2090(oil) Gross weight: 8.8kg

Skf 33209q tapered roller bearing Specifications: Type: tapered roller bearings, single row Lubrication: oil or grease Dimensions: 45x85x32mm Id (inner diameter)/bore: 45mm Od (outer diameter):85mm Width/height/thickness: 32mm Dynamic load ratingcr(kn):108kn Static load rating cor(kn):143kn Lubrication: oil preservative Grease lubrication speed (r/min):5300 Lubricating oil speed(r/min):7500 Weight:1.55kg Features: tapered roller bearings, according to the row number of rollers, are defined as single row, double row and four rows. The single row tapered roller bearings clearance should be adjusted when they are mounted. For double row and four row tapered roller bearings, the clearance can be provided when assembling them according to national standards, customers don't need to adjust it. Application : 1. Auto wheel hub, auto engine, auto axle 2. Agricultural machinery, rotary plow bearings, tractor, water pump, oil engine harvester, seeder, tricycle, farm vehicle, cultivator 3.Engineering machinery, excavator, dozer, paver, loader, hoisting machinery, piling soil machinery 4. Steel mill machinery, oil field machinery, motorship machinery 5. Hardware tool, electric power tool, household appliance industry 6. Electronic toys, fitness equipment, building machinery 7. Series of pumps, antiseptic pump, water pump, submersible pump, sewage pump 8. Motor bearings, generator, hydroelectric generator 9. Machinetool, special purpose grinder, precision lathe 10. Printing machinery, woodworking machinery, textile machinery 11. Locomotive bearing, wind power generation set, heat energy generation set, hydroelectric power generation set fields