Ature:remove all oil or grease, soluble contaminants and other foreign matter
All surfaces to be coated should be clean, dry and free from contamination
If applied on rusty surface, rusty layer thickness should be below 50mm, other than bottom surface processing requirements, without acid and sandblasting processing, catalytic reaction, to get black protective layer and solvent (acrylic acid, polyurethane, epoxy resin, alkyd resin, amino paint or water-based paint) match well, will not occur and paint color bleeding
Apply in nice weather, don't let coating contact any liquid like water or other solvent before completely dry
No painting be carried out in rainy day outdoor
If above 85% humidity please stop painting
Temperature of substrate should be above 5¡ãc
Lower temperature might not dry or cause long time to dry
•air spray:nozzle orifice range: 1.5 to 2.5mm
Nozzle pressure range: 0.3 to 0.5mpa
•airless spray:nozzle orifice range: 0.4 to 0.5mm
Nozzle pressure range: 12 to 15mpa
•features:brush: use soft brush
Recommended finish: rsl series
Storage temperature: 5 to 30¡ãc in well ventilated warehouse
Stir thoroughly before painting
Don't use any steel or other metal stick to stir paint
20l/barrel
Waterborne Polyurethane waterproof coating Polyurethane waterproof coatings can be divided into one-component and two-component. One-component polyurethane waterproof coating, also known as moisture-curing polyurethane waterproof coating, is a reactive moisture-curing film-forming waterproof coating. It is applied to the waterproof base layer during use and is cured to cross link into a tough, soft and seamless rubber waterproofing membrane by reacting with moisture in the air. High-strength polyurethane waterproof coating is a two-component reactive curing waterproof coating. High-strength polyurethane waterproof coating Two-component chemical reaction-cured isocyanate-terminated prepolymer obtained by polycondensation of polyether and acid. Component B is composed of plasticizer, curing agent, thickener, accelerator, and filler. Composition of colored liquids. When used, the two components of A and B are uniformly mixed in proportion, coated on the surface of the waterproof base layer, and often cured by temperature cross linking to form a rubber elastic film with high elasticity, high strength and durability, thereby waterproofing. The waterborne polyurethane waterproof coating generally refers to the one-component polyurethane waterproof coating, and the oily refers to the two-component polyurethane waterproof coating; in comparison, the water performance is almost the same, the price is also cheaper, the most important thing to look at the use environment! However, waterborne polyurethane waterproof coatings are more environmentally friendly.
Water Borne Peelable Resin PU-3018A Product Introduction PU-3018A is a protective resin made of water borne polyurethane dispersions, using high performance additives and advanced processing technology. The waterborne peelable coating made of this resin has bright color, and fine particle size, coated on the surface of automobiles, furniture, electrical appliances and other objects as a protective coating, with good protection, can form a continuous, uniform, strong protective coating on the surface of complex shapes, can isolate the erosion medium, protect the surface of the substrate not easy to be worn, abrased, scratched, meanwhile, moisture-proof, rust-proof, corrosion â??proof, improve the commodity value of coated products. Upon completion of the protection period, the film can be conveniently removed to restore the original appearance of the object. Physical Property ModelPU-3018ACompositionPolyurethane organosilicon copolymerAppearanceMilky liquid with blue shadeSolid content35�±2%PH7.1-8.0IonicityAnionViscosity (Brookfield 25â??)50-160mpa.s Performance Features High peeling strength, not easy to break High strength, good water resistance Excellent low temperature resistance, weather resistance, air permeability and moisture resistance, and universality of different substrates Applications All kinds of metal surface, for example, temporary protection of products such as automobiles and stainless steel appliances Temporary protection of all kinds of glass products Temporary protection of all kinds of plastic products Can be used as temporary protection for coating, ink coating Can be used as temporary protection for other products Application Guide Can be directly painted on the surface of the construction surface, or add the right amount of water after dilution Can be added talc, silica and other inorganic split materials Can also add resin-free pigment paste to do color temporary protection coating The peelable film dry completely, when it needs to be removed, please tear out a long mouth along the edge of the film, and then slowly peel the film from the coated surface with a force of about 4-5kg Packaging and Storage Condition 50KG, 120KG, 200KG plastic drum; Stored in a 100% light â??proof sealed container; Stored in a cool and dry place indoor at 5-30â??; Under high temperature or exposure, the shelf life will be significantly shortened; Shelf life is 12 months from the date of production under condition that the drum is not opened. Special Tips This material is complied according to our existing technology and experience, the technical advice provided is sincere, but it is not guaranteed to be used in all samples and formulations, all the data are for users reference only.
MicroF_W168 is a water-based micronized polyethylene homopolymer. The average particle size of MicroF_W168 is between 5.5 and 6.0 microns, and the maximum particle size is 21 microns. Application: Top grade water-based ink, water-based wood coating, Waterborne coatings, etc; Addition quantity: about 1%, can be added directly in the water-based system; Advantage: can be directly dispersed in the water-based system; Characteristics: good storage stability, good smoothness and wear-resistant performance.
MicroF_W168 is a water-based micronized polyethylene homopolymer. The average particle size of MicroF_W168 is between 5.5 and 6.0 microns, and the maximum particle size is 21 microns. Application: Top grade water-based ink, water-based wood coating, Waterborne coatings, etc; Addition quantity: about 1%, can be added directly in the water-based system; Advantage: can be directly dispersed in the water-based system; Characteristics: good storage stability, good smoothness and wear-resistant performance.
Can be applied directly on rusty steel( rust layer ¡ü45um)! Color and appearance: grey or others Coating thickness um: 50¡à5mm Solid content % : 69¡à3% Overcoating interval: minimum: 4 hours max: unlimited Recommended substrate conditions and temperature: 1.Remove all oil or grease, soluble contaminants and other foreign matter. All surfaces to be coated should be clean, dry and free from contamination. 2.If applied on the rusty surface, the rusty layer thickness should be below 45 um 3.Apply in good weather, don¡¯t let coating contact any liquid like water or other solvent before completely dry. No painting be carried out in rainy day outdoor , if the humidity is above 85%, please stop painting 4.The temperature of substrate should be above 5¡ãc, lower temperature might not dry or cause a long time to dry Air spray:nozzle orifice: 1.5-2.5mm Nozzle pressure: 0.3-0.5mpa Airless spray:nozzle orifice: 0.4-0.5mm Nozzle pressure: 12-15mpa Brush : use soft bursh Recommended finish: rsl series finish Shelf life: 12 months Over coating time Substrate Temperature 5¡ãc 15¡ãc 25¡ãc 35¡ãc 45¡ãc Minimum interval 24hrs 7hours 4hours 3hours 2hours Maximum interval Unlimited storage temperature : 5-30¡ãc in well ventilated warehouse 20l/barrel or 20kg/barrel
Supplier: Waterborne paint, building coating, boat coating, car coating, wood coating
Supplier: Waterborne wood coatings, waterborne floor coatings, contact adhesive, polychloroprene rubber, pigments for coatings and ink
Buyer: Polychloroprene rubber
Water based Alkyd resins for industrial coatings Alkyd resins represent, both historically and commercially, the class of chemical compounds used in the field of paints and stains. Their chemical structure is a continuous and waterproof film which can protect surfaces from multiple strenuous agents conducting an anti-corrosive. The commercial paints based on these resins, the molecules of the structure, in particular, create strong structural interactions involving the formation of films able to cover any type of surface by protecting against aging, weather and wear. the paints made from alkyd resins have been among the first to be used in the construction industry, in particular in the production of exterior paints and enamels, and in the production of products for the treatment of surfaces exposed to particularly arduous conditions, for example various ferrous metal substrates such as structural steel, railings, equipment and machinery. We offers alkyd resins that have achieved high functionality through modification with other resins such as acrylics, urethanes, epoxies. Features: Good storage stability, no ease to hydrolyze; Environment friendly product, VOC of less than 7%; Fast dry, and excellent gloss; unnecessary to add drier during paint preparation; Excellent shear stability, and can directly use for pigment paste grinding; Excellent anti-corrosivity, and good initial water resistance; The finished product paint has good versatility and good in-can appearance, and can replace oil based alkyd anti-rust paint, alkyd ready mixed paint, alkydenamel, etc Waterborne Acryle Resin Product No. WL-310 Acryle modified akyd dispersion Solids content: 42±2 Viscosity(25,mPa·s): 2000 Air dry: Oxidation Cross-linking Property:Low VOC; High gloss; Excellent corrosion resistance. Application:Waterborne alkyd enamel ready mixed paint and anti-rust paint PS:(1) The Viscosity withï¼?is measured in the case of the resin diluted by equivalent amount of propylene glycol methyl ether.
Waterborne assist non-odour. Super dirt resistance, Water resistance and breathe freely, Non-yellowing, Outstanding hiding and adhesion, 50000 times for scrub resistance. Method Surface preparation: the grease, dust, moisture, rust on the bonding surface must be cleaned off. Make sure that the surface must be dry during rainy days, or it will cause non-stick atmosphere. Mix well before painting, plus proper clean water for diluting and mix well. Stop application when temperature is below 8 celsius Proposed painting 2 times and recoat interval should be over 2 hours (depend on touch dry). Application tools: brush, roller, and spray Consumption: the theoretical value - 8 to 12 m2 / time/kg (the thickness dry coating film is 30 microns) (actual consumption may vary due to different construction method, dryness and hardness level of the base surface, roughness and construction environment) Attention Shelf life: 24 months in sealed cans. Storage condition: keep it out of touch of children, store in cool, dry and ventilated place. The storing temperature shall range 5-35 celsius, Thinned paint should not be poured back to the original can. Technical index: This product conforms to china national mandatory standard:gb/t9756-2001 Appearance: white viscous liquid Solvent type: water-base Color: white Gloss: matt To touch: 0.5-1 hours Viscosity:100 ku Solid content:57% Voc: ín 47 g/l 1l drum; 5l drum; 18l drum