Fe.Csm 100/120/150/200/250/300/380/450/600g/m^2 width:900-3200mm
Re.Csm 100/120/150/200/250/300/380/450/600g/m^2 width:900-3200mm
Width:900-3200mm
Fe.Csm 100/120/150/200/250/300/380/450/600g/m^2 width:900-3200mm Re.Csm 100/120/150/200/250/300/380/450/600g/m^2 width:900-3200mm Width:900-3200mm
E glass chopped strand mat E glass chopped strand mat is made from e-glass chopped strands around 50mm in length, bonded together by powder or emulsion binder which is extremely soluble in styrene. The basic strand has a sizing system containing a silane coupling agent. 1. Excellent impregnation properties 2. Excellent conformability 3. Good mechanical properties 4. Good drapability 5. High tensile strength
Product Information: Fiberglass Chopped Strand Mat is made by chopping continuous strands into unit length chopped strands which to be spread out randomly and evenly, then bonding them together with powder or emulsion binder. Chopped Strand Mat is characterized by good combination of resin, easy operation, good wet strength retention, good laminate transparency and low cost. It is used primarily for hand lay-up process, filament winding process and press molding of FRP products. It is suitable for the application by hand lay-up FRP molding, such as, various sheets and panels, boat hulls, boat tubs, cooling towers, corrosion resistant, vehicles, etc. Normal width is 1040mm/1270mm, but also can produce it according to your requirements. Product Specifications EMC100: Powder/Emulsion, 100±8g/m2, 1040/1270/2080 3600mm Width; EMC150: Powder/Emulsion, 150±12g/m2, 1040/1270/2080 3600mm Width; EMC225: Powder/Emulsion, 225±15g/m2, 1040/1270/2080 3600mm Width; EMC300: Powder/Emulsion, 300±15g/m2, 1040/1270/2080 3600mm Width; EMC380: Powder/Emulsion, 380±18g/m2, 1040/1270/2080 3600mm Width; EMC450: Powder/Emulsion, 450±20g/m2, 1040/1270/2080 3600mm Width; EMC600: Powder/Emulsion, 600�±25g/m2, 1040/1270/2080 â?3600mm Width; Product Advantages: *Short strands of fibers held together by a styrene binder *Builds up thickness quickly *Very economical and offers good stiffness. *Conforms to tight curves and corners *Can be torn of cut to size *Low cost and easy to use Packaging Information Fiberglass stitched mat is wound onto paper tube and then wrapped up with plastic film, which can be packed in a cardboard box or kraft paper. The rolls are to be horizontally placed rolls can be loaded into container directly or on pallets for Fiberglass stitched mat.
300g fiberglass mat/ chopped strand mat/ csm/ sheet/ felt 1.Introduction E-glass chopped strand mat is made of randomly distributed chopped strands held tighter by a emulsion/ powder binder. It is compatible with unsaturated polyester, vinylit, epoxy resins. The roll width ranges from 50mm to 2080mm. Special requirements may be available upon request. 2.Usage It is used for processing and manufacturing frp products with getting through hand lay up process, filament winding process and press molding. Typical products is including bathroom accessories, pipe, building material, automobile, furniture, vessel, cooling towers and other frp products 3.Packing Product is manufactured in form of a roll wound on a paper tube and then packed in a plastic film and placed within a cardboard carton. Rolls can be loaded into a container directly or on pallets. 4.Parameter Density(g/m2Moisture content (%Loss on ignition (%Binder typeWidth (mm) 2250.22.1-6.3Powder/ emulsion1040 1270 2080 2500.22.1-6.3Powder/ emulsion1040 1270 2080 3000.22.1-6.3Powder/ emulsion1040 1270 2080 4500.22.1-6.3Powder/ emulsion1040 1270 2080 6000.22.1-6.3Powder/ emulsion1040 1270 2080
"DD fiberglass" Fiberglass chopped strand mat Glass type: e-glass, c-glass; Area weight: 150, 225, 300, 450, 600g/m2; Width: 1040mm, 1250mm. Binder: powder, emulsion. Film, carton
300/450/600/225 gsm powder/emulsion binder Woven roving 400/600/800gsm Direct roving 1200/2400/4800tex Fiberglass mesh Chopped strands for smc/bmc 3/4/6/12mm. According to customer requriement
E-glass chopped strand mat We are the manufacturer and exporter specialized in e-glass chopped strand mat in china, the capacity is about 6500mt per year, the normally specifications are 300g/m2, 450g/m2, 600g/m2 and the width is 1000mm, 1040mm, 1250mm, 1270mm, 2540mm ect, powder or emulsion bind! quality products, competitive price and fast shipping, we sincerely wish we can have the chance to cooperate in near futurer. 30kg/roll, 300gsm, 1040mm*76ooomm
This product have excellent properties of resin impregration, easy mouldability, which is mainly for the applications by hand lay-up frp mouldings such as various sheets and panels, boat hulls, bath tube, cooling towers, etc. Features: 1. Weight/m2: 200g/250g/300g/450g/600g, etc 2. Binder type: powder, emulsion 3. Roll width: 1. 04m, 1. 27m, 2. 08m 4. Roll weight: 30 kg or 35kg/roll 5. Packing: inner plastic bag and outer carton.
Fiberglass chopped strand mat With the characteristics of non-directional and even distribution, high mechanical kinetics. With fine plating and fitting for complex shapes of moulders. Well-soaked with resin, cutting freely, working simply. With high strength of absorbing resin, smooth appearance. Specification Package First sealed with pvc film, then packed in the cardboard box. Standard weight: 250g/¼o, 300 g/¼o, 380 g/¼o, net weight 30kg per box.. Standard weight: 450 g/¼o, 600 g/¼o, net weight 35kg per box.