150 Barrel

FlexiShine Pollyblends has launched a next-generation technology to create glass-filled PP compounds. We create compounds with unprecedented strength. Glass Filled PP Compound is prepared by compounding Polypropylene Homo-Polymer with a fine grade of glass. The entire process followed as par the industry standard and up to mark of all grades which are suggested by the authorities. Glass-Filled PP Compound manufacturers in India use a special technique to increase the long term thermal-mechanical properties. We use some additives like antioxidants, lubricant, processing aid. It shows good dispersibility and excellent balance of properties in the final product if some compounds are used directly or diluted with desired grades of polypropylenes. FEATURES High strength High chemical resistance High melting point (150 to 200F) Very low density Abrasion resistance Lightweight Low-cost fabrications Machinable Maintenance-free Weldable Wipes clean Dimensional stability Excellent electrical properties Typical Applications Acid Tank/Lineup Battery Cases Tank Covers Etching Machines/Rinse Tubes Machined Parts Fume Hoods Ducts Scrub Stations Metal Plating Barrel

Eva injection moulding machine Mould-holder Number of stations No 6 8 Clamping force Kn 170 Mould-holder dimensions Mm 290*500*2 290*530*2 Mould height Mm 120/125/145/165/180/190/200 120/125/145/165/180/190/200 Max: Opening stroke of the mould-holder Mm 340(mold thickness)/120mm 340(mold thickness)/120mm Heating plate No 4*4 4*4 Heating type Heater/ Heater/ Heating power (each station) Kw 10.4 10.4 Injection unit Screw diameter No 2 2 Screw speed Mm 60 65 Max. Injection volume Cm 3 950 1100 Screw sped Rpm 0-150 Adjustable 0-150 Adjustable Thermal zone of barrel No 4 4 Injection pressure Bar/cm2 1130 1130 Power consumption Injection unit heating Kw 15.6 15.6 Heating plate Kw 62.4 104 Motor for hydraulic Kw 59 59 Total electric consumption Kw 137 178.6 Machine dimension M 9.20*4.5*2.73 12*4.50*2.70 Weight (Approximate) Tons 26 38

Hdpe ldpe lldpe high-speed film blowing machine Max film width(mm):700 1000 2100 2200 Max output(kg/h):40 50 150 170 Screw diameter(mm):45 55 110 120 Screw & barrel material:38crmoala Main motor power(kw):11 18.5 55 75 Film thickness(mm):0.01-0.15 0.01-0.15 0.01-0.15 0.05-0.18

Extruder We mainly produce extruders for profiles, pipes, sheets and boards. Double screw extruder has a series: sjsz45, 55, 65, 80 and 92. Single screw extruder has a series: sj25, 30, 45, 65, 90, 120 and 150. All extrusion line adopts infinite speed variation by frequency converter, overload protection, trouble alarm, constant oil temperature in screw, oil cooling in barrel and the devices of vacuum exhausting as well as fixed quantity feed. The electric parts are from world famous brand, such as simens, omron, mitsubishi, abb, lg and rkc.

Qingdao HUASU Machinery Fabricate Co., Ltd designs and develops HDPE/MDPE water supply pipe production line and gas pipe production line by itself. It has many features, such as: special structure, high degree automation, easy operation, continuous produce stable and reliably and so on. It is also applicable for high speed extrusion of PE,PP,PPR,PERT,ABS etc. Plastic Pipes produced by this line have excellent stiffness, flexibility, high mechanical strength, resistance of environmental stress cracks, resistance to creep deformation, heat-linkage and so on. It has become the first choice for the city gas pipe and outdoor water pipe. HDPE/MDPE pipe extrusion line mainly includes single screw extruder, molds, vacuum calibrating water tank, spray water cooling tank, haul-off machine, cutting machine and overturning bracket. Extruder: HDPE/MDPE pipe extrusion line adopts high speed and efficiency of single screw extruder.The screw has barrier unit, special material mixing components and new style of barrel grooves. The extruder is equipped with low noise fan, ceramic heating ring, high speed hard gear reducer; full-automatic vacuum loader. This configuration assures good plasticization and mixing effect. It also assures high speed, stable production and great output. Pipe Marking Line: It is extruded by single screw extruder SJ30/25 through the composited extrusion die. Die Head: The material of the die head is high quality 40Cr. It is the most advanced spiral or lattice die head in the world, which assures stable extrusion in the production process. In order to fit the performance of PE material and assure the stability of pipe diameter and roundness when producing thick-wall pipe with high speed, we adopt water film lubricating and water (or oil) circulation cooling. Vacuum Calibrating Water Tank: The body is made of high hardness and good quality stainless steel board. It has advanced water circulation and high pressure cooling system, vacuum adjusting equipment and accurate water temperature and water level automatic controlling system. The accurate bronze calibrating sleeve ensures cooling speed and molding pipe. It can be three-dimension adjusted up & down and left & right. Water Spray Cooling Tank: The body is made of stainless steel and the ductcoat is transparent soft PVC curtain. Stainless steel float adjusts water level and electricity controls water temperature. The nozzle material is ABS engineering plastic. The frame of the machine can be adjustable up and down. There is roller in the tank. Haul-off Machine: We can offer two tracks, three tracks, four tracks, five tracks and six tracks Haul-off machine according to different diameter and wall thickness of the pipe. It adopts frequency conversion. Every traction frame transfers with chain which ensures every track moving simultaneously. It is pneumatic and mechanical combination clamping. The bearing has special structure which can effectively reduce the installation error. Cutting Machine: It is automatic dustless cutting machine. Smooth cutting section, synchronous frequency conversion drive, high accuracy and low noise. Large diameter pipe uses full-automatic planetary cutting machine. It is synchronization with the whole production line. The flexibility adjustment for the blade place and cutting depth assures cutting machine reliability. Control System: We can offer SIEMENS PLC controlling system which is intelligent controlling system. Also we can offer ordinary controlling system which use SIEMENS electrical parts, Omron temperature controller. Intelligent control makes the operation simpler. Main Technical Parameter: Model Pipe Diameter (mm) Extruder Speed (m/min) Max.Output (kg/h) Total Power (kw) Dimension L¡ÁW¡ÁH SRQG-63 Ø20-Ø63mm SJ-65¡Á30 1.5-12 120 65 30 ¡Á2.2 ¡Á2.5m SRQG-110 Ø20-Ø110mm SJ-90¡Á30 2-12 220 110 32 ¡Á2.2 ¡Á2.6m SRQG-160 Ø63-Ø160mm SJ-90¡Á30 1.3-6 300 150 32¡Á2.2 ¡Á2.8m SRQG-250 Ø75-Ø250mm SJ-90¡Á33 0.7-4 400 200 40 ¡Á2.2 ¡Á3m SRQG-315 Ø110-Ø315mm SJ-90¡Á33 0.5-3.5 400 200 40 ¡Á2.2 ¡Á3m SRQG-400 Ø160-Ø400mm SJ-120¡Á30 0.3-2.4 550 280 42 ¡Á2.2 ¡Á3m SRQG-500 Ø200-Ø500mm SJ-120¡Á30 0.3-1.9 700 360 42¡Á2.3 ¡Á3.5m SRQG-630 Ø315-Ø630mm SJ-120¡Á33 0.2-0.7 800 450 50 ¡Á2.3 ¡Á3.5m SRQG-800 Ø400-Ø800mm SJ-120¡Á33 0.1-0.6 1100 560 50¡Á2.5 ¡Á4m SRQG-1200 Ø630-Ø1200mm SJ-150¡Á33 0.05-0.5 1300 720 65¡Á3¡Á4.5m Suit for shippment.

Semi-auto lids / caps pressing machine fc-p/20l (with air excluding function) Application This kind lids/caps pressing machine fc-p/20l mainly used in open barrels, paint barrels, oil barrels, drums, paint bucket, hand drum (easy handheld type) series: 4l, 5l, 10l, 12l, 18l, 20l. It’s belonged to necessary special tools which widely used in barrel, can, lubricants, coatings, chemicals, petroleum, edible oil and other liquid packaging industries. Feature ? crossq capping machine fc-p/20l: it’s an important part the production line, finishing barrel cover capping, twice capping make sure tight & flat during and after capping. ? crossq capping machine fc-p/20l: locating heavy barrel below capping plate, after finishing positioning work, use foot switch to start capping function, which including twice capping. ?crossq capping machine fc-p/20l air excluding function: there’s an air excluding device under the Middle size of capping plate, this function can make barrel air-out to protect barrel when capping. Technical parameter: NameSemi-auto lids/caps pressing machine ModelFc-p/20l Control systemElectronic – pneumatic Capping plate size?340mm (be optional) Cap pressing range4-20l   Cap pressing speed(20l pail)120-150 pcs/hour; (4-10l pail)150-200pcs/hour Material Painted steel structure, roller without engine Dimension1000(l)×520(w)×1300(h)  (mm) Weight100kg

Purui pp, pe packaging film recycling pelletizing system Application of pp, pe film granulating plastic recycling machine: for recycling printed and heavily contaminated film materials Applicable plastic materials: pp, hdpe, ldpe, lldpe, tpv, abs and ps, and more Material shapes: film, bag and flake Material types: woven bag, printed ldpe film, film ( rolls, loose, bundled), waste agriculture film, foamed plastics (eps) and raffia Features of pp, pe granulating plastic recycling machine: The filter before the vacuum system achieves better degassing and filtering effect Material is cut, pre-dried, pre-heated, pre-homogenized and compacted in the shredding drum Many materials can be processed directly without need of the upstream pre-shredding, resulting in a dramatic reduction in operational costs Less power consumption cost per kilogram(film: 0.39kw/kg, flake: 0.35kw/kg), high throughput, reduced floor space occupation and operator attendance Screw and barrel: 38crmoa1a, nitrogen treatment Two hydraulic screen changers with good degass ModelMl85Ml85bMl100Ml100bMl130Ml130bMl160Ml160bMl180Ml180b Screw diameter(mm)85100130160180 L/d33:1-37 Rotatry speed(r/min)10-150 Output(kg/h)120-180200-350400-550600-800800-12001000-1500 Customerized

HY49010 ETFE Resin is a premium fluoroplastic resin available in translucent (2.5 mm / 0. 1 inch) per. Compared with other levels of ETFE Resin, its most unique feature is the balance of intermediate flow and attributes, which makes it suitable for various processes and highly demanding end-uses. HY49010 ETFE Resin can be used in other thermoplastic plastics without mechanical toughness, Extensive thermal performance, successful implementation under difficult environmental conditions or restricted by manufacturing problems Properties  HY49010 ETFE Resin makes it uniquely suitable for high speed machining, especially for extrusion coatings and long, thin or complex injection molding. The properly treated product is made of a neat HY49010 ETFE Resin, inert to most solvents and chemicals, hydrolytic, stable and weathering. The recommended maximum operating temperature is 150 °C ~ (2 +) 302 °F ~ (-1), and useful properties are retained in low temperature range. The level and stability of dielectric properties are very good. The flame grade obtained by UL94 method is V-0. Mechanical properties include outstanding impact strength, penetration and wear resistance. Processing Method HY49010 ETFE Resin can be processed by conventional melt extrusion and injection, compression, transfer and blow molding processes. Compared with other grades, it has large traffic and can be handled more easily and faster. At the same time, the melt viscosity decreases with the increase of shear rate. Reciprocating screw injection molding machine is preferred. Corrosion resistant metal is recommended for contact with molten resin. The extruder barrel should be long, relative diameter to provide residence time to heat resin about 340 °Con 640 °FN.