Chengdu Purui Polymer Engineering Co., Ltd.

Small washing line. 500kg/h to 600kg/h This washing line can be used for the ps/abs flake scrap and crushed flake material It is can wash the material with little sand or dust! Work process: First, crusher cut the woven bag into small scrap And then the screw below the crusher to go on the pre-wash process with adding water (screw below the crusher) The high friction washer wash again with using the friction force! After that, the floating tank filter and wash the material Final, the firticon washer do wash process again All the material go to the centrifugal dryer Final, we can go on the pelletizing process! Any problem, welcome to put forward! Customerized

General introduction: From shredding compactor, the material is transported directly into the extruder by a belt conveyor without being precut or compressed. The rate of material feeding is controlled automatically by the current of the extruder motor and main extruder screw rotating speed. This design will keep material with balance feeding, and protect material from blocking and melting in the shredding compactor. Degassing parts: natural degassing/ vacuum degassing Melting plastic is filtered by a continuous melt filter (plate hydraulic screen filter, double volume screen changer) available with or without back-flushing system. According to material type, the pelletizing way can be equipped with a water ring, strand or underwater pelletizing system. Main Technical Parameter Normal ModelML75ML85ML100ML130ML160ML180 Screw diameter(mm)7585100130160180 L/D26 to 33 Output(kg/h)100-120100-180200-300400-600600-800800-1000 Advanced (high efficiency with power saving) ModelML75BML85BML100BML130BML160BML180B Screw diameter(mm)7585100130160180 L/D26 to 37 Output(kg/h)100-150200-350400 to 550600 to 800800 to 10001000-1200

Purui pp, pe packaging film recycling pelletizing system Application of pp, pe film granulating plastic recycling machine: for recycling printed and heavily contaminated film materials Applicable plastic materials: pp, hdpe, ldpe, lldpe, tpv, abs and ps, and more Material shapes: film, bag and flake Material types: woven bag, printed ldpe film, film ( rolls, loose, bundled), waste agriculture film, foamed plastics (eps) and raffia Features of pp, pe granulating plastic recycling machine: The filter before the vacuum system achieves better degassing and filtering effect Material is cut, pre-dried, pre-heated, pre-homogenized and compacted in the shredding drum Many materials can be processed directly without need of the upstream pre-shredding, resulting in a dramatic reduction in operational costs Less power consumption cost per kilogram(film: 0.39kw/kg, flake: 0.35kw/kg), high throughput, reduced floor space occupation and operator attendance Screw and barrel: 38crmoa1a, nitrogen treatment Two hydraulic screen changers with good degass ModelMl85Ml85bMl100Ml100bMl130Ml130bMl160Ml160bMl180Ml180b Screw diameter(mm)85100130160180 L/d33:1-37 Rotatry speed(r/min)10-150 Output(kg/h)120-180200-350400-550600-800800-12001000-1500 Customerized