Auto Saw Girth Welder

Vertical travel speed: 0 to 250 mm/min Plates handles: from 1.40 to 3.20 meters height. Plates thickness: from 8 to 50 mm single side welding 32mm. Tank diameters: 5.00 meters and over Regulates welding current through the feedback of arc voltage, and it adjusts wire stick out and welding head auto lifting by welding current feedback. Applicable for í¦bottom to upí¦ constructed storage tanks,  inside/outside welding Suitable for tank diameter 5.00 m and over  adjustable wind shielding standard frame for tank shell plate 1.4 m to 3.2 m high Front and back side are forced together after water cooling. Fixed ceramic or water-cool cooper mat is applied at the back side, water-cool copper shoe is applied at the front side. It use 100% co2 gas shield and flux cored wire or intershield flux cored wire. Liquid surface of melting pool self-controllable, auto-traveling welding carriage and self-adjustable sitck out. 4feet

Supplier: Auto saw girth welder, electro gas verticle welder, slurry pump system

Auto-Feeding Precise Circular Sawing Machine Features & Functions: : * Vertical sliding saw head ensures stable and precise cutting ( Circular Saw ) * Backlash eliminating device prolongs the life of saw blade * Counter Balance System for maximum stability through the entire cut * Patented Floating Feeding Carriage for superior cutting length accuracy and smooth material handling * Rigid and reliable clamping vise provides secure material holding * Automatic lubrication system maintains good work performance * Circulating cooling system results in smooth cutting surfaces and longer blade life * Electronic Saw blade protection cover for safety operation * Built-in chips tray for convenient cleaning and maintenance.

Welding Range : 10-20 Cooling Way: Air Cooling Control: Semi-Automatic Frequency Range: Line Frequency Electric Current: AC Type: Butt Welding Deliver Time: Negotiation Trademark: dingjuquanqiu Transport Package: Wooden Case Specification : 420*310*1100(mm) Origin: China HS Code: 8525809090

Can diameter 52-350MM Height 65-450MM Wedline 0.4MM Thickness of tin 0.16-0.35MM Speed of weldline 5-12/MIN Capacity 80PCS/MIN Diameter of copper wire 1.3-1.5MM Flow of cooling water 121/MIN Wooden packing

SRET Equipment Co., Ltd. As a on line cutoff machine , FJ series flying friction saw enable cutting of the products to present length in a high precision , Providing a very short cutting cycle where pipe end condition are not critical . It can easily handle all types of products-Round, Square and Rectangle .

Sret equipment co., ltd. The horizontal spiral accumulator is used on medium and large pipes and tube mill line, installed between the shearwelder and the forming mill, which accumulates a large amount of strip in a reasonable amount of space to give enough time for the shearwelder to cut and join both ends of the two successive coils for continuous mill operation. It's main characteristics: improving quality of products, prolonging service life of forming machines and rollers, easy installation and operation. Product range: wlht32-wlht630 Strip width: 40-2000 mm Strip thickness: 0.6-24.0 mm Net storage: 400-1200 m

SRET Equipment Co., Ltd. JH series automatic shearwelders, covering a range from 40 to 2000 mm wide and 0.6 to 22.0 mm thick metal strip, provide a low cost method to join coil ends together in a minimum cycle time for continuous mill operation. In this process, the trailing end of the leading coil passing through the accumulator and the leading end of the next coil from uncoiler are cut & welded parallel by shear and welder together. These actions are controlled automatically by PLC controller. SRET JH series automatic ShearWelders are designed and continuously improved to provide the most reliable, the fastest and the most automated joining of steel coils. Product range: JH114-JH630 Strip width: 120-2000 mm Strip thickness: 2.0-24.0 mm

Supplier: Air compressor, generator, cut off saw, welder, bench drill