The material about 1m3 can be crushed into the granularity of 5-8mm finished product.
Application:
The DPX series single-stage fine crusher is developed based on the single-stage (counter-attack) hammer crusher to crush raw materials for industry such as limestone, gypsum, raw coal and so on and further to simplify the work flow of smashing. The product granularity is small (80% <5mm) in comparison with the ordinary single stage hammer crusher. The equipment investment is lower about 35~50% than that of the same scale traditional process. The charge of long-term movement is lower about 30% than that of the same scale traditional process equipment system. It has widely applied in cement, sand and stone material, electric power professions and so on.
Operation principle:
Large blocks of raw material are fed into the crushing cavity and piled on the middle brackets. The hammer head runs between the gap of middle brackets, continuously striking the large blocks of raw material and making them fall. The falling little blocks are further struck by the hammer running at a high speed. They are then put in order and outputted by the arc-shaped grate shoe.
Remarkable characteristic:
f¦The big feeding granularity (500mm f_Df_1200mm);
f¦The large crushing ratio and the little granularity(D80f_8mm);
f¦Low power and low electricity consumption;
f¦Change three-stage crushing into single-stage crushing, simplify the process flow;
f¦When this machine is used to crush the sand and stone materials, the discharging granularity can be adjusted according to the required arrange of 3-30mm.
f¦Structure is simple;
f¦Easy maintenance;
f¦Reliable operation;
f¦Low expense of operation.
Technical parameter:
Type and spec. The max. feeding granularity (mm) Discharging granularity (mm) Electric motorf+s power
(KW) Service life of the hammer
(t) Capacity (t/h)
DPX-15II Dmaxf_500 Dª+++f_3
D80f_8 22f+30 10000f+20000 12f+20
DPX-35II Dmaxf_700 55f+75 30000f+50000 20f+40
DPX-65II Dmaxf_800 75f+90 50000f+80000 55f+75
DPX-90II Dmaxf_900 132f+160 80000f+120000 80f+100
DPX-125II Dmaxf_1000 Dª+++f_8
D80f_10 180f+210 130000f+150000 110f+130
DPX-180 315f+355 180000f+220000 160f+200
DPX-250 Dmaxf_1100 D80f_10 400f+560 220000f+260000 230f+260
DPX-300 Dmaxf_1300 500f+630 300000f+400000 280f+320
Single-stage fine crusher The material about 1m3 can be crushed into the granularity of 5-8mm finished product. Application: The dpx series single-stage fine crusher is developed based on the single-stage (counter-attack) hammer crusher to crush raw materials for industry such as limestone, gypsum, raw coal and so on and further to simplify the work flow of smashing. The product granularity is small (80%
Features: * great crushing ration and high production efficiency. * between-layer crushing and more uniform size fraction of end products. * lower wear parts consumption and operation cost. * primary and fine crushing can be achievable just by replacing fixed cone. * advanced hydraulic technologies realize overload protection and hydraulic adjusting discharge opening, simplify crusher structure and lessen its weight. * reliable and advanced thin oil lubrication extends service life. * simple maintenance and convenient operation.
Single Cylinder Hydraulic Crusher Single cylinder hydraulic cone crusher is widely used in mining, metallurgy,construction, highway, railroad, and waterconservancy, etc. It can break or crush all kinds of medium hard or harder ore for mining, chemical building, materials and other industrial sectors. This kind of machine has the features of big crushing ratio, continuous operating, even granularity, automated hydraulic clearing system, high capacity, simple structure and low operating cost, suited perfectly for middle and fine crushing. Crushing Features: 1.Higher rotating speed and stroke make production capacity which improved 35%-60% than old spring cone crusher; 2.The Max feed size is bigger than other kinds of cone crushers; 3.Better shape of final product than spring cone crusher. Less Needle flake; 4.The design of hydraulic protection and hydraulic cavity clearing improves the automation and reduces the downtime and maintenance time; 5.Auto system of thin oil lubrication makes the life time increased. Working Principle : When the crusher works, the motor drives the small gear; the small gear drives the large gear; the large gear assembly (large gear, large gear rack) drives the eccentric bushing assembly (eccentric steel bush and eccentric bronze bush) and main shaft assembly (main shaft, inner cone, inner cone liner) to revolute within the bronze bush with the center of theoretical verticlal line, while the main shaft assembly can rotate around the main shaft within the eccentric bronze bush as the center line. When the crusher works without load, the eccentric bushing assembly and the main shaft assembly revolutes the large gear. When the materials fall into the crushing cavity, the main shaft assembly (main shaft, inner cone) slowly rotates within the eccentric bronze under the resistance of materials.
Cone Crusher For Secondary Crushing Applications, high quality and reliability. url:http://www.hysancrusher.com
SM100 Single Cylinder Cone Crusher, designed and made through absorbing the world advanced crushing technology, has achieved world advanced level. It is widely applied to metallurgy, construction, hydropower, transport, chemical and building material industries and suitable for crushing variety of hard and above middle-hard ores and rocks Features: * Great crushing ration and high production efficiency. * Between-layer crushing and more uniform size fraction of end products. * Lower wear parts consumption and operation cost. * Primary and fine crushing can be achievable just by replacing fixed cone. * Advanced hydraulic technologies realize overload protection and hydraulic adjusting discharge opening, simplify crusher structure and lessen its weight. * Reliable and advanced thin oil lubrication extends service life. * Simple maintenance and convenient operation. The capacity charts is a reference for properly using SMH cone crusher and getting to its capacity. Crusher is a component of mining production line, so its characters result from feeder, conveyor, screen, electric motor, drive part and surge bin. Noticing follow factors can enhance crusher capacity and performance. 1.Select crushing chamber according to be crushed materials. 2.Proper matching of feeding particle size. 3.Feeding material is evenly distributed at 360íp around crushing chamber. 4.Automation controls 5.Unobstructed crusher discharge area. 6.Belt conveyor specification is compatible with crusher max capacity. 7.Properly choose screen specification for prescreening and closed-circuit screening.
The hammer head is made of AMC composite material which is at international level and is developed by our company independently. The life of super hammer head branded as "Big Gold Teeth" is 50-150% longer than that of hammer made from Mn18Cr2MoNbRe. The reconstruction of crushing cavity with our patent of "stone strike stone" greatly increases the self-breakup rate of stones, which efficiently reduces the load of grate-shoe and hammer head. The technology of WHM two-step super hard surface interspersed welding is introduced for the rotor. The life of weld beadis over two times than that ordinary anti-abrasion welding rads. The main shaft is made of military gun steel with high strength the steel is made by means of vacuum double refining, whose strength is 4-5 times higher than that of ordinary shaft. New design of grate-shoe. The shones flow smoothly and stably. The size of stone is fine and even. The life of wall plate is long. Features Stones stricken by stones crushing cavity Hammer head is wearable Intensity of principal axis is higher Discharging granularity is fine and equality Easy maintenance Relialbe operation.
Stone crushing equipment consists of jaw crusher, impact crusher, cone crusher, fine crusher, roll crusher, hammer crusher, mobile crushing station, etc. Process of rock crushing line: Big size stones are transferred to primary crusher through Vibrating Feeder from hopper for first crushing, then the crushed materials are transferred to Impact Crusher through Belt Conveyor for secondary crushing. The crushed materials will be transferred to the vibrating screen, and separated to different sizes. The aggregate with suitable size will be transferred to the final product pile and that with unsuitable size will be transferred to the Impact Crusher for re-crushing. This forms closed circuit manifold cycles. The sizes of final products will be graded and separated according to customers' requirements, and the deduster will be attached for the sake of environment protection. Characteristics of stone crushing line: They are widely used in the mine, metallurgy, building materials, highway, railway, water irrigation and chemical industry. They have the features: Big crushing ratio, even granularity, simple structure, reliable working condition, convenient repair and economical operation. This factory produces various types of rock crushing and screening device, including coarse crushing Jaw type, fine crushing Jaw type, cone type, impact type breaker and vibration feeding machine, reciprocating sieve, belt conveyor, they have the characteristics of large crushing ratio, granularity is even, advanced structure, reliable work, excellent quality., the use service is convenient, low operation expenses, etc. Deeply welcomed by domestic and foreign customers. Our factory can offer many kinds of sets of equipment to meet the different stone materials yard production needs, provides the quarry design, the equipment setup, the debugging start-to-finish service for the user. This equipment widely uses in the stone material factory, the mine, the metallurgy, the building materials, the road, the railroad, the water conservation, the chemical industry and other departments. Productivity from 50-500t/h, product size can be according to the users' different needs combination and classification.
HCS Series cone crusher features Comparing with other kinds crusher, HCS Series Symons cone crusher have excellences for fine crushing, high productions and low maintenance. The long force arm designed into the HCS Series Symons cone provides greater crushing force. And the spring release system generates more opposing force than other cone crushers. So use in mine industry widely.
Hc hydraulic cone crusher is widely used for secondary and fine crushing in the fields of mining, building materials, metallurgy and so on. It can crush materials with middle and high hardness, such as ironstone, copper ore, granite, an, locking oilcan and hydraulic driving oilcan) not only protect the machinery, but also deal with troubles without disassembling the parts; 2. Easy operation, reliable performance and adjustable finished product size; 3. The crushing chamber is specially designed according to particles-layer-pressure principle. The special chamber and the suitable rotary speed improve crushing ratio and capacity as well as the cubic product percentage; 4. If something abnormal happens, such as iron is fed into the crushing chamber or there is a jam in the chamber, the machine will lift up the cover and discharge the materials automatically. This eliminates the trouble of stopping the machine to discharge the materials by workers, so the maintenance is easier, the cost is lower than spring cone crusher; 5. It is adjusted by hydraulic device and lubricated by diluted oil. The labyrinth seal eliminates the defect of mixture between water and oil in the traditional spring cone crusher; 6. The mantle and cone cave are made by high manganese steel. The special design of crushing cavity and particles-layer-pressure protection decrease the abrasion, making the service time 30%~80% longer than traditional cone crusher.
