Stone crushing equipment consists of jaw crusher, impact crusher, cone crusher, fine crusher, roll crusher, hammer crusher, mobile crushing station, etc.
Process of rock crushing line:
Big size stones are transferred to primary crusher through Vibrating Feeder from hopper for first crushing, then the crushed materials are transferred to Impact Crusher through Belt Conveyor for secondary crushing. The crushed materials will be transferred to the vibrating screen, and separated to different sizes. The aggregate with suitable size will be transferred to the final product pile and that with unsuitable size will be transferred to the Impact Crusher for re-crushing. This forms closed circuit manifold cycles. The sizes of final products will be graded and separated according to customers' requirements, and the deduster will be attached for the sake of environment protection.
Characteristics of stone crushing line:
They are widely used in the mine, metallurgy, building materials, highway, railway, water irrigation and chemical industry. They have the features: Big crushing ratio, even granularity, simple structure, reliable working condition, convenient repair and economical operation.
This factory produces various types of rock crushing and screening device, including coarse crushing Jaw type, fine crushing Jaw type, cone type, impact type breaker and vibration feeding machine, reciprocating sieve, belt conveyor, they have the characteristics of large crushing ratio, granularity is even, advanced structure, reliable work, excellent quality., the use service is convenient, low operation expenses, etc. Deeply welcomed by domestic and foreign customers.
Our factory can offer many kinds of sets of equipment to meet the different stone materials yard production needs, provides the quarry design, the equipment setup, the debugging start-to-finish service for the user. This equipment widely uses in the stone material factory, the mine, the metallurgy, the building materials, the road, the railroad, the water conservation, the chemical industry and other departments. Productivity from 50-500t/h, product size can be according to the users' different needs combination and classification.
Stone crushing for quartz process.
The flotation separating process including storage bin, chute feeder, vibrating feeder, PE jaw crusher, vibrating screen, pendulum feeder, ball mill, high frequency screen, mixing barrel, flotation separator, concentrator, filter press, dryer, etc, they have the characteristics of large crushing ratio, granularity is even, advanced structure, reliable work, excellent quality., the use service is convenient, low operation expenses, etc. They have the characteristics of large crushing ratio, granularity is even, advanced structure, reliable work, excellent quality., the use service is convenient, low operation expenses, etc. Deeply welcomed by domestic and foreign customers. Our factory can offer many kinds of sets of equipment to meet the different stone materials yard production needs, and in line with management objective of "quality first, customer supreme&", provides the quarry design, the equipment setup, the debugging start-to-finish service for the user.
The ore mined is first brought to jaw crusher for preliminary breaking, and after broken to reasonable fineness evenly taken into ball mill by hoist and vibrating feeder for crushing and grinding. The fine ore stuff grinded by the ball mill enters into the next process: classification. The spiral classifier uses the principle that solid particles of different proportion have different settling velocity in liquid to cleanse and classify the ore mixture. When the cleansed and classified ore mixture passing the magnetic separator, the magnetic materials contained in the mixture will be separated by magnetic force and mechanical force due to their different specific magnetization coefficient. And then the mineral particles that are preliminarily separated by the magnetic separator are sent to the flotation machine and mixed with different chemicals according to the characteristics of different minerals contained to separate the targeted minerals from other materials. After the targeted minerals are separated, as they carry a lot of moisture, they must be preliminarily enriched by the thickener and dried by the drier and then dry minerals can be got.
This production line is composed of the feeder machine, jaw crusher, the counter-attack crusher, vibrating screen, belt conveyor and centralized electric control. It can be used crushing many kinds of materials aggregate like the limestone, granite, basalt, river stone and slag and so on. It is suitable to be applied to the water and electricity, building, building materials, highway, urban construction profession. Basic technical process introduction of stone production line Firstly, the stone from the mountain will be fed into the jaw crusher to be preliminary crushed. The finished product after be crushed thickly will be transported to the counter-attack crusher to be further crushed by the belt conveyor. Secondly, the stone after be crushed twice will be transported to the vibrating screen by the belt conveyor and the different specification gravel will be screened by the vibrating screen to satisfy the customer request. The unqualified gravel returns to the counter-attack crusher by the belt conveyer to be crushed once again and forms the close up to complete the crushing work. Stone material production line performance introduction This production line has the high automatization, high efficiency production, low cost, high income, the finished product granularity even, good grain size which conform to the national high speed materials requirement. This selection of equipment of the production line is mainly decided by the specification, output and the customer request. We can provide the customer with the comprehensive technical process and technical support also may design the non-standard parts and so on according to the installment condition of the site.
Application in processing tiles, stones and other building materials.Water cutter is applied in this field much earlier. Currently, the overwhelming majorityin this area use it. They focus on artistic matching. At present, tile matchingand stone matching have expanded all over the world. It is the best way to use water cutter to process tiles. It largely improved productionefficiency and processing precision. It achieved an epochal progress of tilesfurther processing, as it said good bye to the traditional ways of manual grindingand polishing. Presently waterjet cutting is mainly used to make all kindsof complex tile or marble matching . Simple packing.
The stone production line is composed of vibrating feeder, jaw crusher, impact crusher, vibrating sieve, belt conveyor and computer controlling board; its design output veries from 50 tons to 500tons per hour. In order to meet the needs of different clients, cone crusher and dust collecting equipment can be added to the prodution line. It can be used in industry like hydroelectricity, building materials, express way, city construction to operate the aggregate of hard limestone, granite, pebble, slag of metallurgy and man-made sand. We can combine different model of machines in the production line according to different technical process. Brief introduction of the stone production line Big block of stone is evenly conveyed to jaw crusher by vibrating feeder via silo for primary crushing. After primary crushing, the stone is sent to impact crusher by belt conveyor for secondary crushing. Then the stone is tronsported to vibrating sieve for screening, thus the stone can be classified into several groups depending on the size. The stone with a necessary size will be sent by belt conveyor to the palce where finished product is piled; otherwise, the stone will be conveyed by belt conveyor to the impact crusher for another crushing, thus a circular production process is formed. Introduction of stone production line performance This production line is highly automatic, except the turning on, turning off and daily maintenance of the equipments no other mannual operations are needed. It enjoys the advantages like: high efficiency, low cost, high throughput, high profit, evenly-sized and good-shaped finished product, meeting the national requirements of rapid need of raw materials.
Stone Production Line: Zhengzhou Vipeak Heavy Industry Machinery Co., Ltd. manufactures various equipments for whole set of stone production line, and provide complete technical support for customers. The whole production line consists of vibrating feeder, jaw crusher, impact crusher, vibrating screen, belt conveyor, electric control, etc. We design different production lines ranging 50 t/h to 500 t/h by combining different models of equipments also matching cone crusher, deduster, etc.It is widely used for crushing hard limestone, granite, basalt, gravel, metallurgic slag, etc or artificial sand making for hydroelectric power, building material, high way, city construction, etc. Different models of equipments are combined to meet different customers' demands according to different craft requirements. Process of the Production Line: Big size stones are transferred to primary crusher through vibrating feeder from hopper for first crushing, then the crushed materials are transferred to impact crusher through belt conveyor for secondary crushing. The crushed materials will be transferred to the vibrating screen, and separated to different sizes. Those aggregate with suitable size will be transferred to the final product pile and those with unsuitable size will be transferred to the impact crusher for re-crushing. This forms a closed circuit manifold cycles. The sizes of final products will be graded and separated according to customers' requirements, and the deduster will be attached for the sake of environment protection.
Supplier: Paving stones, agricultural and processing products
Buyer: Building materials, machinery
Chain fertilizer crusher is suitable for the fragmentation of organic fertilizer and compound fertilizer blocks during production process, also widely used in chemical, building materials, mining and other industries. In the process of crushing, we use synchronous speed of high-strength wear-resistant carbide chain plate, inlet and outlet design is reasonable, so that broken material uniformly, uneasy to stick wall and easy to clean. This type crusher using the latest technology and high-quality steel,system optimization design, so it is of large yield and high reliability.