Liyang Baisheng Machinery Co., Ltd.

It imitates animal two jaw movement, it press, twist and grind the material in chamber through the fixed jaw plate and 1. Moveable jaw assembly adopts high quality casting steel, heavy eccentric shaft adopts forging steel processing, the machine with transcendental stability. 2. Comparing with the same size jaw crusher, we adopt more durable eccentric shaft bearing, so the bearing capacity is big. 3. While guarantee the performance improvement, we simplify the machine structure. Easy operation and maintenance, the downtime is greatly reduced.

Hc hydraulic cone crusher is widely used for secondary and fine crushing in the fields of mining, building materials, metallurgy and so on. It can crush materials with middle and high hardness, such as ironstone, copper ore, granite, an, locking oilcan and hydraulic driving oilcan) not only protect the machinery, but also deal with troubles without disassembling the parts; 2. Easy operation, reliable performance and adjustable finished product size; 3. The crushing chamber is specially designed according to particles-layer-pressure principle. The special chamber and the suitable rotary speed improve crushing ratio and capacity as well as the cubic product percentage; 4. If something abnormal happens, such as iron is fed into the crushing chamber or there is a jam in the chamber, the machine will lift up the cover and discharge the materials automatically. This eliminates the trouble of stopping the machine to discharge the materials by workers, so the maintenance is easier, the cost is lower than spring cone crusher; 5. It is adjusted by hydraulic device and lubricated by diluted oil. The labyrinth seal eliminates the defect of mixture between water and oil in the traditional spring cone crusher; 6. The mantle and cone cave are made by high manganese steel. The special design of crushing cavity and particles-layer-pressure protection decrease the abrasion, making the service time 30%~80% longer than traditional cone crusher.

Dehong jaw crusher series are based on years experience and technology development. The continuous improvement and refinement has made them the preferred jaw crusher for professionals and our customers. They can meet most crushing requirements in primary and secondary crushing, and the largest compression resistance of the material is 320mpa. This series are widely used in stone mining, metallurgical, construction, smelting, hydraulic and chemical industries, etc.

Stone hammer crusher application: this series of stone hammer is applicable crushing of brittle minerals, such as coal, salt, plaster, alum, brick, tile and limestone with compression strength no more than 100mpa and humidity no more than 15%. Pc hammer crusher introduction:this series of machine broke materials through the high-speed rotating hammer body and collision the material surface, it has a simple structure, large crushing ratio, high production efficiency and other characteristics, it can be used for dry and wet two forms crushing, it applies to mining, cement, coal, metallurgy, building materials, roads, fire and other departments chronology medium hardness and brittle materials. The device can change material particle size and adjust gap of article grate in accordance with user requirements, so it can meet different users Structural characteristics: stone hammer crusher has compact frame, reasonable layout, easy installation, good maintainability, simple operation. Particularly, it excellently adapts the layout of cement production process, save the space of process layout. With special structural characteristics, that is having big materials ratio etc. Stone hammer crusher is divided into ordinary hammer crusher and ring hammer crusher respectively. Ring hammer crusher generally used in coal, coke and other industries. Ordinary hammer general english prefix is expressed by pc, used pch english prefix that usually is ring hammer crusher.

Introduction: Cone crusher is suitable for crushing all kinds of ores and rocks above medium hardness. It has the features of reliable structure, high productivity, easy adjustment and economical operation etc. It is widely used in metallurgy, architecture, rock making, chemistry and silicate industry for crushing various mid-hard and hard ores and rocks. The spring system acts as an overload protection system that allows iron to pass through the crushing chamber without damaging the crusher. It uses consistent grease or water for sealing, which separates crushed particles and lubricating oil, and ensures reliable work. The types of crushing chamber depend upon the usage of the final products. The standard type is applied to medium crushing; the medium type is fit for medium and fine crushing and the short head type is fit for fine crushing. Main Features:We supply a wide range of Cone Crushers, for various secondary and tertiary crushing applications, therefore to insure the best and most feasible Cone Crusher type, fit for different plant configurations, designed for the most efficient and economical production and rock down sizing application. Our Cone Crushers are supplied in four general categories, designed for various types of secondary or tertiary applications, both for closed circuit and open circuit configuration: 1.Coarse type application. 2. Fine or medium type crushing. 3. Short head design.4. Super short head for fine crushing application. 5. Continuous Lubrication: This type of crushers are supplied with high capacity external mounted lubrication unit, composed of oil-tank, oil filtering system, high oil temperature shut-down, low oil flow shut-downs and oil flow gauge, which is designed to supply continuous and stable oil, by forced lubrication to the Cone Crusher, for smooth rotation and operation.  Cone Crushers are configured with many safety features. The lubricating unit is interlocked with the main motor, in order to provide additional safety, which includes oil filtration and automatic shut-down in the event of high oil temperature, as well as low oil flow. Crushers are configured with Spring-Loaded release system, which allows any inscrutable material to pass through the crusher, without causing damage to the crusher. The locking system (manual or hydraulic), will easily secure the crushing clearance. All models are configured with proven spring-type mechanism, in order to recover Tramp-Iron and provide protection to the unit. Applications :Cone crusher is a kind of crushing machine commonly used in mining, metallurgical industry, construction, road construction and chemical industry. Our cone crusher can be used to crush hard and medium hard minerals, rocks, iron ores, limestone, copper ores, quartz, granite, sandstones, etc.

PF Series Impact Crusher is one kind of equipment to crushing the brittle material which compression strength no more than 350 Map, the advantage including high crushing ratio, uniform product grain and low over crushing, low energy consumption, high adjustment range of product grain size and optional crushing etc, which is mainly used in mine, metallurgy, cement, construction material, coal etc for secondary crushing and fine crushing the medium hardness material. Application: Metallurgy, construction material, mine, beneficiation and large block material crushing. Our advantages: 1. Large feeding port and high crushing cavity, suitable to crushing the material with high hardness and big grain size, and less powder. 2. The gap between impact plate and hammer plate is adjustable, so the discharging grain size can be effective control and the grain shape is well. 3. The hammer, impact plate and lining plate are made of new type abrasion-proof material with long working life and impact protection, wear protection. 4. Because of the function of three-stage crushing and plastic, so the crushing ratio is high, and the product shape is cube and can optional crushing. 5. The multi-function hydraulic station has many function of hydraulic discharge gap with high speed, impact plate stable vibration and the body open automatically. The PF series impact crusher is mainly compose of the rack, driving system, rotor, hammer and impact plate etc. The main feature including: 1.Rack: It composed by two parts of upper and lower with connection by bolt. All the parts contact the crushed material in the rack have set replaceable lining plate. 2. Driving System: The main shaft and rotor are driving by motor through belt then doing the high speed rotary motion. 3. Rotor: It adopts entire cast steel structure with high mass force, solid and durable, convenient to install the hammer. 4. Impact Plate: It is made from new type abrasion material and hanging freely inside the equipment. One end connect with the two sides of the rack through hanging shaft hinge, another end is bearing in the upper rack cone gasket through stay bolt which is adopt a sphere gasket, it can prevent the equipment damage by non-crushing material when crushing material. 5. Hammer: It is made from new type abrasion material and fixed on the rotor through wedge block