Single fluke anchor is similar to a naval anchor. There is only one fluke, but it is larger in size. This type of anchor has a larger fluke force than admiralty anchor.It could be used as positioning anchors for various working vessels and dredgers to make sure the vessel does not move during dredging operations.
Marine Anchors for ships and boats are produced with state-of-the-art casting technologies (except welding anchors) in . We have improved the existing casting process by simulating existing casting processes. With optimized ingate position,added riser and densener,the possibility of casting shrinkage is greatly reduced. Meanwhile, the MAGMA software is employed to simulate the casting process, which can accurately reflect various changes in the casting process. This is convenient for our engineers to observe the entire casting process more intuitively, and accurately predict the actual design by observing the possible defects and their occurrences. Through these methods, we can avoid problems that may arise in production, and improve casting efficiency and accuracy, so as to reduce costs and speed up delivery. Welded Anchors are also in our scope. Nominal Weights Range: 1KG-55000KGS Available Types(some anchors are not listed) : AC-14 HHP high holding power anchor Pool anchor Spek anchors Hall anchor D-hone anchor Japan stock anchor Japan stockless anchor U.S.N.(navy) stockless anchor Admiralty anchor Single fluke anchor Matrosov anchors
SPEK Anchor is an improved version of the Hall anchor with the center of the anchor head located below the centerline of the pin. The structural feature is that the anchor crown is provided with an anchor plate and a reinforcing rib. Therefore, the flukes of such anchors are easily turned to the ground and have better stability. Moreover, when the anchor is being raised, the anchor flukes are naturally facing upward, and could easily turn over in contact with the hull plate without damaging it. China TUF stockless Spek anchors for marine and ship are produced in China and approved by major IACS members like CCS, ABS,LR,DNV-GL, KR, NK, RMRS and BV. Available Types: Type SR Spek Anchor Type M Spek Anchor Type 95 Spek Anchor
The Hall anchor is a stockless anchor with a holding power of 3-4 times its weight.Although this is smaller than the Admiralty anchor, its outstanding convenient casting and raising makes it outperform Admiralty anchor and is therefore widely used. The Hall anchor is the first generation of modern standard stockless stowing anchor and is an ideal bower anchor. Its fluke can rotate freely to a certain inclination to the anchor shank. The anchor crown and anchor flukes are a one-piece casting part. China TUF Marine Hall anchors are produced with casting and forging steel with major IACS approvals like ABS, BV, CCS, RMRS,LR and etc. Available Types: Type A, Type B, Type C, Hall Anchors.
Ship anchors are available at a good rates and condition. Single peace or as per inquiry
Admiralty anchor is a conventional stock anchor. The holding power is usually 4-8 times the anchor weight, up to 12-15 times and can firmly grasp various soil. It is suitable for bottoms of sands, hard mud, gravel and reef.Its flukes and shank are cast as one piece. TUF Marine and Perpetual produce admiralty anchors with reliable cast steel material and advanced technique
Anchor Handling Towing Winch is often used for anchor handling tug supply vessels (AHTS). TUF normally designs it in accordance with vessel calculated bolllard pull. This winch is normally with double or triple drum. For triple drum, TUF can design in a way that any two drums can be operated simultaneously at half load or any one single drum at full load in accordance with customer requirements. Chain lifters are mounted on the outer drums. The capacity for electric powered type can be up to 2000KN while for diesel and hydraulic driven type can be up to 5000KN. IACS Approvals: ABS, BV, CCS, DNV-GL, KR, LR, NK,RMRS
Anchor Handling Towing Winch is often used for anchor handling tug supply vessels (AHTS). TUF normally designs it in accordance with vessel calculated bolllard pull. This winch is normally with double or triple drum. For triple drum, TUF can design in a way that any two drums can be operated simultaneously at half load or any one single drum at full load in accordance with customer requirements. Chain lifters are mounted on the outer drums. The capacity for electric powered type can be up to 2000KN while for diesel and hydraulic driven type can be up to 5000KN. IACS Approvals: ABS, BV, CCS, DNV-GL, KR, LR, NK,RMRS
TYPE SINGLE SPAN, DOUBLE SPAN, MULTI-SPAN. ONE FLOOR, TWO FLOORS, THREE FLOORS. BUILDING FOUNDATION STEEL FOUNDATION WITH ANCHOR BOLTS. COLUMN & BEAM MATERIAL: Q235 & Q345 & Q420. BRACING X or V TYPE BRACING MADE BY ANGEL STEEL, ROUND Bar etc. Wall & Roof C or Z PURLINE SIZE: C120 C320mm; Z100 Z300mm. WALL & ROOF PANEL SINGLE CORRUGATED STEEL SHEET. SANDWICH PANEL INSULATION WITH EPS, PU, ROCK WOOL etc. WINDOW & DOOR PVC or ALUMINIUM ALLOY WINDOW. ELECTRIC ROOL-UP DOOR. SLIDING DOOR BY SANDWICH PANEL OR SINGLE CORRUGATED STEEL SHEET. Surface Treatment HOT GALVANIZED COATING COLD GALVANIZING. Spray-Painting, Any color, according to your request. ACCESSIORES SEMI-TRANSPARENT SKYLIGHT BELTS. VENTILATORS; DOWN PIPE; GUTTER. STANDARD BOLTS.
Glass tube, Styrene free The capsule size is from 8mm to 30 mm with threaded anchor rod. A capsule contains acrylate resin (vinyl ester), peroxide(hardening agent), quartz particle.When the components are combined, they form an adhesive mortar which mechanically bonds the anchor rod to solid base material. This type of system must be used with a chisel pointed anchor rod which spin into it with a rotary hammer drill. 1) Chemical material: acrylic resin,styrene free, quartz particle 2) Glass tube: easy to pack 3) Rapid condensation 4) steady to humidity 5) Easy to apply 6) Temperature range: - 5 ~ +40ípC 7) Shelf life: 12 months 8) Resistant to acid and alkali,and aging; fire and heat-resistant
