Phenol-containing wastewater is a kind of water pollution resource with wide source, large quantity, high concentration and great environmental hazard.
DATA SHEET FOR EPOXY EPOXY COATING :- INTRODUCTION - EPOXY COATING (HYB) is a two part high solids solvent free epoxy phenolic resin based coating system designed for hard wearing, smooth surface finish for floors, walls and on steel structures. Nonskid surface finish can be achieved on floor, if required. FEATURES: 1) Hard Wearing 2) Non Dusting 3) Excellent Surface Finish 4) Non Smelling 5) Good Aesthetics 6) Highly Chemical Resistant APPLICATION: 1.Stir well before mixing Part A and Part B and mix in the prescribed ratio. 2.Apply one coat of EPOXY primer on the clean and dry surface. 3.EPOXY COATING (HYB) should be applied on the surface by brush or roller within 24 hrs. After application of primer coat it should be allowed to air dry for min. 4 hrs. Preferable in a dust free atmosphere. 4.Apply min. 2 coats with the intercoat interval of 6-8 hrs. PRODUCT SPECIFICATIONS: Application - Brush, Roller Mixing Ratio - As Directed on Packing Port Life - 30 Mins. Drying Time - Touch Dry- 30 Min, Hard Dry 6 Hrs. - Intercoat Interval 6-8 Hrs. Min. - Dry Film Thickness 125-150 Microns/per coat - depending on porosity Covering Capacity - 6-8 sq.met/kg per coat depending on porosity, roughness & method of application. Color Shades - All Standard Shades RECOMMENDED USES: 1) Food & Pharmaceutical 2) Work Shop 3) Clean Room Application 4) Chemical Resistant Coating for Concrete& Steel 5) Petrochemical, Fertilizer plants METHOD OF APPLICATION: SURFACE PREPARATION The long-term durability of the applied Epoxy coating (HYB) epoxy coating is dependent on the adhesion between sub-base and coating material. It is most important therefore, that the substrate surfaces are correctly prepared prior to application. 1.Before application of the Epoxy coating (HYB) surface should be free from loose partials, rust, oils, grease or earlier coatings and should be totally dry. 2.New concrete or cementations surface should be placed at least 28 days and have a moisture content of less than 5% before application of Epoxy coating (HYB) 3.After surface is dry, all repair work like sealing of joints, cracks filling of cavities and crevices should be carried out. HEALTH & SAFETY - Keep the containers tightly closed when not in use. Avoid contact with skin & eyes. It comes in contact with the body, wash affected parts with plenty of water and contact a doctor. Other known sector for Epoxy floor lining, Epoxy garage floor lining, Concrete epoxy lining, Concrete floor epoxy lining, Epoxy pipe lining, Marine epoxy lining, Sub marine epoxy lining, Basement lining epoxy floor shield, Louisiana, Oregon, Chip lining color epoxy floor, Aviation lining epoxy interior.
We are mfg of phenolic resin, novalac, resol, and as per partys specifications. Lumps and powder in 25kg bag, and resol in 30 kgs in plastic carboy.
Industrial grade Packing : 25 kgs / bags
Various Grades of Phenolic Resins - Novolacs & Resoles, in Lumps, powder & Liquid form. - Solvent based Resins
Usage: this product is an effective viscosifier for natural rubber and synthetic rubber. Due to the high degree of alkyl branching, this product has greater compatibility with rubber.This product can especially increase the initial viscosity of rubber.Especially for radial tire, it can effectively solve the problem of adhesive and provide high forming quality.This product can be used to manufacture tire, transport belt, hose, wire and cable products.Recommend 2-5 servings.
There are the powder and liquid resin for bonded abrasives production to meet the demand of different domain. This series is adopted advanced production equipment and processing. With strict formula design, effective molecular weight and distributing control method, it makes the distributing of resin molecular reach an extremely ideal status. The powder resin is characterized in strong viscosity, mechanical strength, abrasion resistance, heat resistance and wet grinding stability. As the excellent wetter, the liquid resin has a good wetting function and well-distributed miscibility. It makes the liquid resin with good humidity by the special processing. There is no caking under the high humid environment and with high intensity and good grindability, which is the excellent product for grinding wheel.
Water is a daily necessity for the human body, as it replenishes water for the body. Under ideal circumstances, pure and safe drinking water can be consumed directly. However, as pollution becomes increasingly severe, including the discharge of some nuclear wastewater, many tap water cannot be directly consumed. No matter which channel you drink from, there is a great chance of contamination, which affects direct drinking. Radium pollution in drinking water is one of the dangerous pollutants, a radioactive element that can enter the water supply system and cause water pollution. The good thing is that this type of pollution can be removed, and high-quality PW981 material provides a comprehensive solution for radium pollution. If you need more information, you can login to our website
Perchlorate root as a kind of harmful inorganic chemicals, water pollution has become one of the current serious environmental problems. Perchlorate huge for biological hazards, low concentration of perchlorate in drinking water can damage to the person's thyroid root, and even induce thyroid cancer. In the wastewater can be removed using ion exchange resin can be effectively ClO4 -, in order to achieve highly purified, and is beneficial to the regeneration of resources. Kingshan resin production of resin can be according to the different water conditions, provide appropriate perchlorate root with ion exchange resin, high exchange capacity, easy to regeneration, large quantity, good separation effect, use cycle is long, is the best choice for removal of perchlorate root.
The main sources of cadmium-containing wastewater are electroplating plant, battery factory, cadmium stearate production plant, cadmium sulfide production plant, and sponge cadmium production plant. Cadmium is poisonous. If people drink cadmium-contaminated water and food for a long time, cause chronic cadmium poisoning. At present, there are many methods for treating cadmium-containing wastewater, but the ion exchange resin method is more economical, more convenient, and better in treatment than other methods. Suzhou Bojie Resin Technology Co., Ltd. provides different cadmium removal resins for different water quality conditions. It has the advantages of large adsorption capacity, low environmental requirements and simple operation. It can effectively remove a small amount of cadmium in wastewater and meet emission standards. The domestic and international markets have been widely used.
