The pollution of lithium batteries mainly has two aspects. On the one hand, heavy metals, such as cobalt, manganese, and nickel in lithium cobalt oxide materials of ternary batteries, although not so toxic, are also heavy metals. In contrast, lithium iron phosphate is Much cleaner
Coking wastewater composition is complex, poor biodegradability, more kinds of pollutants, most of the current domestic coking enterprises in coking wastewater ammonia quality concentration has made a lot of efforts. People began to use ion exchange resins to treat ammonia nitrogen in coking wastewater.
Jiangsu Kingshan New Material Co., Ltd provides ion exchange resin for the removal of ammonia nitrogen in coking wastewater, which has a good engineering practical prospect, ion exchange resin adsorption wastewater ammonia nitrogen, can effectively eliminate interference from other ions, ion exchange resin adsorption method is a cost-effective and efficient treatment of ammonia nitrogen in coking wastewater.
Ammonia nitrogen fertilizer plant after production to produce waste water, the state regulations enterprises should discharge ammonia nitrogen concentration should be less than 70 mg. L- The concentration of ammonia nitrogen in industrial wastewater should be less than 25 mg. L-, the effective substances in wastewater should be recycled, so choose the appropriate and effective method to treat high concentrations of ammonia nitrogen wastewater and recover useful substances and their importance. Jiangsu Kingshan New Material Co., Ltd provides ion exchange resin treatment of high concentration of ammonia nitrogen wastewater, ion exchange method can not only remove ammonia nitrogen in wastewater, while resin recycled recycled products, waste into treasure, with better economic and environmental benefits.
Ion exchange is a promising technology for lithium extraction from salt lakes that can overcome some of the limitations of solar evaporation. However, it also requires more research and development to optimize its performance and feasibility. Ion exchange is one of the many direct lithium extraction (DLE) technologies that aim to improve the efficiency and sustainability of lithium mining
Call me about lithium extraction materials .
Mercury-containing wastewater is one of the most hazardous industrial wastewaters. Mercury in water is generally removed by physical methods such as coagulation, neutralization, precipitation, and filtration. Jiangsu Kingshan New Material Co., Ltd provides ion exchange resin for removing mercury from wastewater. The ion exchange resin has many advantages such as large adsorption capacity, good selectivity, fast adsorption speed, mild analytical conditions, easy regeneration, long service life, and the like, and can effectively remove mercury substances in waste water.
Radioactive waste is produced in large quantities along with the development of the nuclear industry, and radioactive waste water can cause great harm to the environment. Radon has a large share of radioactivity, so removing plutonium is critical. Ion exchange resins are favored for their excellent selectivity and high temperature resistance.
Jiangsu Kingshan New Material Co., Ltd provides ion exchange resin for removing strontium ions. It has good selectivity, obvious removal effect, simple regeneration method, good mechanical strength, and economical efficiency. It is widely used in the removal of radioactive waste.
Perchlorate root as a kind of harmful inorganic chemicals, water pollution has become one of the current serious environmental problems. Perchlorate huge for biological hazards, low concentration of perchlorate in drinking water can damage to the person's thyroid root, and even induce thyroid cancer.
In the wastewater can be removed using ion exchange resin can be effectively ClO4 -, in order to achieve highly purified, and is beneficial to the regeneration of resources.
Kingshan resin production of resin can be according to the different water conditions, provide appropriate perchlorate root with ion exchange resin, high exchange capacity, easy to regeneration, large quantity, good separation effect, use cycle is long, is the best choice for removal of perchlorate root.
Water is a daily necessity for the human body, as it replenishes water for the body. Under ideal circumstances, pure and safe drinking water can be consumed directly. However, as pollution becomes increasingly severe, including the discharge of some nuclear wastewater, many tap water cannot be directly consumed. No matter which channel you drink from, there is a great chance of contamination, which affects direct drinking. Radium pollution in drinking water is one of the dangerous pollutants, a radioactive element that can enter the water supply system and cause water pollution. The good thing is that this type of pollution can be removed, and high-quality PW981 material provides a comprehensive solution for radium pollution. If you need more information, you can login to our website
Fine chemical industry is an important new field of the modern chemical industry, involving the field is very wide, along with economic development, the development of fine chemical industry design field also constantly explore, ultrapure water equipment is fine chemical industry one of the indispensable equipment. This equipment can be applied to chemical materials used in the production and processing process of solvent and the cleaning process, and other solid state electronics, thick film and thin film circuit, etc.
Kingshan resin production preparation of ion exchange resin, to remove the water electrolyte almost entirely, and simple regeneration, regeneration rate is high, further improve the filtering effect, ensure the purity of ultrapure water.
Palladium is an indispensable key material in high-tech fields such as aerospace, aviation, navigation, weapons and nuclear energy, as well as in the automotive industry. It is also an investment that cannot be ignored in the international precious metals investment market. Palladium-containing wastewater is often contained in electroplating wastewater. If it is not recycled, it will pollute the environment and waste resources. Therefore, it is very necessary to recover palladium.
Water generally refers to after the boiler to produce steam turbine to do work, the circulating cooling water cooling condensation resin walking silk processing
Walking wire processing, so need to use deionized water to pure water or tap water ions removal has the very vital significance, ion exchange method to remove the reactive ion has a significant effect in the pure water. Jiangsu kingshan production line cutting processing resin, can make to ion exchange reaction completely, so the water quality, processing and product quality. Easy to regenerate, the operation is simple, economical and practical, quality assurance, popular with domestic and foreign customers praise.
The continuous moving thin metal wire (called the electrode wire) is used as an electrode, and the workpiece is subjected to pulse spark discharge to remove metal and cut. It is mainly used to machine a variety of complex and precise workpieces. In the process of slow wire cutting, the cutting is mainly done in water, so the requirements for water quality are relatively high. Suzhou Bojie resin provides EDM resin, high effluent resin, long and stable life cycle, and the effluent can reach more than 15 megaohms.
Phenol-containing wastewater is a kind of water pollution resource with wide source, large quantity, high concentration and great environmental hazard.
Rhodium, a member of the platinum group, is a silver-white, hard metal with high reflectivity, softness, good ductility and plasticity, and can be used as a bright and hard coating for other metals. It is an indispensable key material in high -tech fields such as automobile manufacturing.
The resin method is to use ion exchange resin to recover rhodium from waste catalysts, waste electrical components, broken vessels containing rhodium, and waste electroplating solutions. It has the advantages of high separation efficiency, simple operation and recyclable resin.
Rhodium adsorption resin produced by Bestion brand has high selective affinity and adsorption rate, and simple regeneration and high regeneration rate, and is widely used in industrial palladium metal recycling.
Lanthanum is one of the most abundant rare earth elements. It can be used as alloys and catalysts. It is widely used in traditional materials and high-tech fields.
The macroporous resin enrichment of lanthanum has many advantages, such as strong adsorption capacity, simple operation, mild desorption conditions, and simple regeneration, so it is widely used.
Bestion Brand lanthanum extraction resin has the advantages of good selectivity, large adsorption capacity, easy desorption and regeneration, etc., and is widely praised by customers.
With the development of human society, the freshwater resources available to human beings are increasingly lacking. How to use limited resources to meet the sustainable development of society has always been a problem that people are constantly exploring. The recycling of condensed water has become increasingly important in our country.
Jiangsu Kingshan New Material Co., Ltd provides mixed bed resin for the recovery of condensed water. It has many advantages such as large adsorption capacity, good selectivity, fast adsorption speed, mild analytical conditions, long service life, etc. It can also be stored in a stable state for long-term storage. The form is provided.
The acid-base wastewater treatment resin produced with Bestion brand resin have strong exchange capacity, long service life, repeated use, stable physical and chemical properties, high reaction efficiency, practicality, and low cost. It is often used in various acid-base wastewater. The treatment process has been widely used in the treatment of acid and alkali wastewater, and has been well received by customers at home and abroad.
