This instrument is compatible with four standards of site to measure surface roughness of various machinery-processed parts, calculate corresponding and clearly display all measurement parameter. When measuring the roughness of a surface, the sensor is placed on the surface and then uniformly slides along the surface by driving the mechanism by the sharp built-in probe. This roughness causes displacement of the probe which results in change of
Inductive amount of induction coils so as to generate analogue signal, which is in proportion to the surface roughness at output end of phase-sensitive rectifier. The exclusive dsp processes and calculates and then
Outputs the measurement results on lcd.
* multiple parameter measurement: ra, rz, rq, rt
* highly sophisticated inductance sensor
* four wave filtering methods : rc, pc-rc,
Gauss and d-p
* built-in lithium ion chargeable battery and control
Circuit with high capacity
* small in size, light in weight and easy to use
* can communicate with pc computer for statistics,
Print and analyz by the optional cable and the
Software for rs232c interface.
*manual or automatic shut down. The tester can be
Switched off by pressing the power key at any time.
On the other hand, the tester will power itself off
About 5 minutes after the last key operation.
Features Used in production site to measure surface roughness of various machinery-processed parts, calculate corresponding parameters according to selected measuring conditions and clearly display all measurement parameters. Specifications Displayª 4 digits, 10 mm LCD, with blue backlight Parameters: Ra, Rz Display Range Ra: 0.05-10.00um/1.000-400.0uinch Rz: 0.020-100.0um/0.780-4000uinch Accuracy: Not more than 10% Fluctuation of display value: Not more than 6% Sensor : Test Principle: Inductance type Radius of Probe Pin: 10um Material of Probe Pin: Diamond Measurement Force of Probe: 16mN(1.6gf) Probe Angle: 90fp Vertical Radius of Guiding Head: 48mm Maximum driving stroke: 17.5mm/0.7inch Cutoff length (l): 0.25mm / 0.8mm / 2.5mm optional Evaluation length: 1~5 cut off optional Driving speed: sampling length = 0.25mm Vt=0.135mm/s sampling length = 0.8mm Vt=0.5mm/s sampling length = 2.5mm Vt=1mm/s returning Vt=1mm/s Resolution : 0.001¬ªm if reading ·+10¬ªm 0.01¬ªm if 10¬ªmf_reading·+100¬ªm 0.1¬ªm if reading fª100¬ªm Power Li-ion battery: rechargeable Operating conditions: Temp. 0-50f¦ Humidity
Features This instrument is compatible with four standards of site to measure surface roughness of various machinery-processed parts, calculate corresponding and clearly display all measurement parameters. When measuring the roughness of a surface, the sensor is placed on the surface and then uniformly slides along the surface by driving the mechanism by the sharp built-in probe. This roughness causes displacement of the probe which results in change of inductive amount of induction coils so as to generate Specifications Display·ª 4 digits, 10 mm LCD, with blue backlight Parameters: Ra, Rz, Rq, Rt Measuring Range Ra, Rq: 0.005-16.00um/0.020-629.9uinch Rz,Rt: 0.020-160.0um/0.078-6299uinch Accuracy: f_f+10% Fluctuation of display value: Not more than 6% Sensor : Test Principle: Inductance type Radius of Probe Pin: 5um Material of Probe Pin: Diamond Dynamo-measurement of Probe: 4mN(0.4gf) Probe Angle: 90fp Vertical Radius of Guiding Head: 48mm Maximum driving stroke: 17.5mm/0.7inch Cutoff length (l): 0.25mm / 0.8mm / 2.5mm optional Evaluation length: 5l Driving speed: sampling length = 0.25mm Vt=0.135mm/s sampling length = 0.8mm Vt=0.5mm/s sampling length = 2.5mm Vt=1mm/s returning Vt=1mm/s Profile digital filter Filtered Profile: RC Filtered Profile: PC-RC Filtered Profile: Gauss Non-Filtered Profile: D-P Resolution : .001¬ªm if reading ·+10¬ªm 0.01¬ªm if 10¬ªmf_reading·+100¬ªm 0.1¬ªm if reading fª100¬ªm Evaluation length : 5 cut-off Power Li-ion battery: rechargeable Operating conditions: Temp. 0~50f¦ Humidity
Hardness tester hln-11a Wide measuring range, for all metallic materials Direct display of hardness scales hrb, hrc, hv, hb, hs, hl Conversion to tensile strength (u.T.S.) Test at any angle, even upside down Removable printer included Six impact devices are available for special applications Large lcd display showing all functions and parameters Battery low indication New function of software calibration Power charging indication on the keyboard led Fault distinguish in details Weight:6kgs Dim:51*38*17
Supplier: Hardness tester, ultrasonic thickness gauge, ultrasonic flaw detector, surface roughness tester
Supplier: Portable metal hardness tester, surface roughness tester, metallurgical microscope and all types of metallurgical laboratory equipment
Buyer: Casting and forging plants, power plants, steel plants, hydro power plants, auto components manufacturers etc.
Supplier: Hardness tester, ultrasonic thickness tester, vibration tester, coating thickness tester, ultrasonic flaw detector, infrared thermometer, surface roughness tester
Supplier: Vibration meter, surface roughness tester, belt tension tester series, ultrasonic thickness meter, coating thickness gauge, moisture meter, grain moisture meter, humidity meter, temp meter, sound level meter, shore hardness tester, lux meter, tachometer
Supplier: Water activity meter, resisitance thermometer, thermocouple thermometer, dew point meter, temperature and humidity meter, temperature calibrator, vibration meter, sound level meter, surface roughness tester, gloss meter, reflectance meter, window tint meter, coating thickness gauge, ultrasonic thickness gauge, ultrasonic leakage detector, ultrasonic flaw detector, whiteness meter, stroboscope, tachometer, lux meter, hardness tester, digital force gauge, tension tester, color meter, anemometer and etc.
Specifications Display: 4 digits LCD, backlit Range: 0~1250 ¬ªm/0~50mil (other ranges can be specified ) Min.radius workpiece: F: Convex 1.5mm/Concave 25mm N: Convex 3mm/ Concave 50mm Min. measuring area: 6mm Min.Sample thickness : 0.3mm Resolution: 0.1 ¬ªm (0~99.9¬ªm); 1 ¬ªm (over 100¬ªm) Accuracy: f+1~3%n or 2.5 ¬ªm or 0.1mil (Whichever is the greater) Bttery Indicator: Low batter indicator. PC interface: with RS-232C interface Power supply: 2x1.5 AAA(UM-4) battery Operating condition: Temp. 0~50f¦ . Humidity