Wet-on-wet application with 3 minutes flash off time.
* Single baking at 130 C for 25 min. High productivity & Low production cost.
* Recommended for welded areas as the composite system at 40-60 (Primer + Topcoat) gives minimum Salt Spray life of 240 Hrs.
It is mainly used for anticorrosion of metal workpieces, bridge steel structures, pipeline handrail, etc., featuring large area application, high performance price ratio, thinning after adding water, environmental friendly, no harm.
Supplier: Epoxy paints, epoxy polyurethane paints and, polyurethane wallcoatings, anticorrosive coatings and waterproofs, primers
Supplier: Permolit boya produces water based interior and exterior paints, ceiling paints, primers, fillers, insulating materials, colorants, oil paints, synthetic paints and primers for final finishing, anticorrosive agents, solvents, wood protective coatings, special paints, thermal insulation systems and other auxiliary materials.
Services:
A general-purpose alkyd based primer with anticorrosive red iron oxide pigment for the protection of steel surfaces against moderate corrosive environments.It is an economical anticorrosive primer for general-purpose applications. USES It is recommended for mild steel structures and surfaces in domestic and mild corrosive environments. It is suitable for interior and exterior use. PROPERTIES Colour, Dry Film : Red Finish, Dry Film : Smooth/Matt Volume Solids, % 51�± 2 Specific Gravity : 1.46�± 0.05 Theoretical Spreading Range : 11-12 M2/L Recommended Dft Range (Dry Film Thickness) : 35-45 Microns/Coat Recommended Wft Range (Wet Film Thickness) : 75-90 Microns/Coat Flash Point : 38 �° C Flexibility : Good Drying Time : @ 30 �° C (Temperature, humidity, air movement, film thickness and number of coats all affect the drying time.) Dry To Recoat/Overcoat : 12 Hours Hard Dry : 24 Hours
Synthetic Primer is based on Alkyd resin containing anticorrosive pigments. It is used as a primer coat for many applications and is quite versatile. It forms a firm base with good adhesion for Ritver Topcoat enamels. Substrates: Metals and Steel. Area of Use: Interiors and Exteriors.
SU-EPO-PRIME 10: is a two pack polyamide-cured epoxy primer containing Zinc Chrome as a corrosion inhibiting pigment. Primer is designed to give outstanding corrosion resistance and adhesion. It cures to a hard and tough film with excellent physical and mechanical properties. This product is universally recommended for direct application on Ferrous metals, suitably treated light alloys or galvanized surfaces, after proper surface preparation. Primer can be overcoated with epoxy and polyurethane intermediate coats and top coats. Two pack Epoxy-polyamide Zinc Phosphate Red Oxide Primer, direct application on ferrous metals. 2) SU-EPO-PRIME 20: is a two component Epoxy cold cured Zinc Chromate Primer with outstanding corrosion resistance and adhesion. Primer cures to a hard and tough film with excellent physical and mechanical properties. This product is universally recommended for direct application on Ferrous metals, suitably treated light alloys or galvanized surfaces, after proper surface preparation. Primer can be overcoated with our epoxy and polyurethane intermediate coats and top coats. 3) SU-EPO-PRIME 30: is a two component Epoxy cold cured Zinc Phosphate primer with outstanding corrosion resistance and adhesion. Primer cures to a hard and tough film with excellent physical and mechanical properties. This product is universally recommended for direct application on Ferrous metals, suitably treated light alloys or galvanized surfaces, after proper surface preparation. Primer can be overcoated with our epoxy and polyurethane intermediate coats and top coats. 4) SU-EPO-PRIME 31: is a two pack Epoxy cold cured Zinc Phosphate primer with high film build outstanding adhesion and corrosion resistance. Primer cures to a hard and tough film with excellent physical and mechanical properties. It is ideal for application in areas where higher thickness is recommended for achieving optimum performance. This product is universally recommended for direct application on mild steel or suitably treated light alloys or galvanized surface, after proper surface preparation. 5) SU-EPO-PRIME 32: is a two pack high solids polyamide cured epoxy resin surface tolerant primer with outstanding corrosion resistance. Primer contains good amount of anticorrosive pigment. It is ideal for application in areas where higher thickness is required for achieving optimum performance. The primer can be over coated with epoxy, chlorinated rubber or polyurethane topcoats. Primer has good adhesion to steel, galvanized steel and non ferrous metals. 6) SU-EPO-PRIME 40: is a two pack epoxy polyamide clear primer, recommended for direct application on concrete & wood substrates.
A premium quality rapid drying primer based on special binder and anticorrosive pigments.
An anticorrosive primer based on high molecular, two pack, epoxy-polyamide resin system and anticorrosive pigment excellent drying, adhesion and abrasion resistance properties.
An anticorrosive primer/ intermediate topcoat based on high molecular, two pack, epoxy-polyamide resin system and anticorrosive pigment excellent drying, adhesion and abrasion resistance properties.
