* Suitable for wet-on-wet application as well as Dual Coat System.
* Excellent exterior durability suitable for Automobile Components.
* High Solids
* Excellent Clarity
* Non Yellowing (Water White)
* Excellent Mar Resistance.
* 500 Hrs Accelerated Weathering
* Excellent Gloss and Clarity
* Longer Pot Life
* Low Bake System. Suitable for plastic parts.
* 800 Hrs accelerated weathering.
* Available in Metallic & Solid Finishes.
* Fast Drying.
* Excellent adhesion on plastic surface.
* Smooth Finish
* Excellent Adhesion on Aluminium
* Compatible with any Stoving Top Coat for wet on wet application.
* Can be used as an alternate to chromotizing on aluminium. No environmental pollution
* Dual Advantage Of Stoving As Well As Air Drying Curing Schedules.
* Color Stability
* Both Solid As Well As Metallic Shades.
* Excellent Adhession & Flexibility With Good Hardness
Excellent Water , Chemical And Alkali Resistance .
High Durability
High Solid Paint & Primer
Heat Resistant Paint based on High Heat Resistant Epoxy resin with excellent anticorrosive and Heat Resistant Pigments, suitable for muffler inside coating.
Application by Dip and Spray
* Less Gloss loss during Heat Age Test.
* Heat Resistance - 250 C x20 Hrs
* Salt Spray Resistance after Heat ageing - 96 Hrs
* Suitable for automobile engine components
Application by Spray
Heat Resistance - 250�°C x5 Hrs
No Shade difference after Heat ageing.
Suitable for automobile engine components
Heat Resistant upto 600 C
Excellent corrosion Resistance
Good resistant to thermal shock
Ideal Coating for three-wheeler and four-wheeler silencers exterior
Heat Resistant Paint based on Silicone Resin, Anti-corrosive and heat resistant pigments.
Suitable for motorcycle silencer inside coating
Single Pack Heat Resistance Aluminium Paint Based On Silicone Resin.
Hr Aluminium Paint Film With Stand Up To 250 C.
It Gives Silver Like Finish And Brilliant Lusture To The Surface .
Good Water And Heat Resistance
High Quality Heat Resistance Paint Based On Pure Silicone Resin
Excellent Coverage And Hiding
Excellent Corrosion Resistance
High Quality Heat Resistance Paint Based On Pure Silicone Resin And Modified Resin
Available Shades In Metallic And Solid Version
Excellent Heat And Corrosion Resistance
A wide range of shades & finishes are available in the following chemistry
Pure Epoxy
PVDF
Epoxy Polyester (Hybrid)
Nylon
Pure Polyester
Polyurethane
PVDF Powder - Excellent Exterior Durability
Nylon Powder - Excellent Salt Spray
HR Powder - 600 C
1K Pu Varnish Glossy Water Base & Solvent Base
Easy To Apply
Single Pack
Superior Durability
Excellent Gloss Retention
1K PU Varnish Matt Water Base & Solvent Base
Easy To Apply
Single Pack
Superior Durability
Excellent Gloss Retention
Quick Drying Glossy And Matt Lacquer Finish.
Can Be Apply With Brush,cloth And Spray.
Heat And Water Resistance
Good Wear Resistance
Quick Drying Glossy And Matt Lacquer Finish.
Can Be Apply With Brush,cloth And Spray.
Heat And Water Resistance
Good Wear Resistance
Excellent Levelling Of Paint Film
Unoform Drying Speed
Excellent Compatibility With Pu And Tsa Paint
Blend Of Genuine Solvent
Improve Film Smoothness And Gloss Of Lacquer .
Quick Drying Properties
Non Milky Effect Mixed With Nc Paint
Easy To Apply
Single Pack
Superior Durability
Excellent Gloss Retention
SCOPE
USES
Kisomin Aluminium Paint is a modified Synthetic Resin based enamel.
It provides high Light fastner and brightness with excellent orientation
finish. it has good adhesion on interior or Exterior surfaces.
Recommended as a decorative finish coat & can be applied on
surfaces like Grill, Windows, Cabinets & wide range Metal Structures.
FEATURES/ BENEFITS
* Smooth durable finish.
* Smooth flow & easy to apply.
* Excellent coverage & hiding.
* Superior surface protection
KEY ATTRIBUTES
* Application temperatures : 10-44 degc
VISCOSITY FOR APPLICATION
* For Brushing 40"-45" at 30C
* For Spraying 18" 20" at 30C
* For Roller 55"-60" at 30C
SURFACE PREPARATION
APPLICATION
BRUSH
CONVENTIONAL SPRAY
NOTES :
HEALTH & SAFETY
Steel : Sand the surface with coarse Sand / water paper according to the type of surfaces to remove rust, dust & other foreign particles. System of
Coating should be selected depending upon the type of substrate. Wipe to clean the surface. Apply single coat primer & allow to dry. Re sand the
surface with Sand paper & wipe to clean. Apply 2nd Coat of primer & allow drying for overnight. Before application of paint, thin down to achieve
desired viscosity & filter through white cloth. Apply Kisomin Paint to finish.
Stir the base thoroughly and then mix to uniform consistency.
Apply by diluted material, where viscosity has to be ensure 40-45 sec by f.c. B4
Add Kisomin thinner to adjust viscosity depending on spray condition. Use any standard equipment at an atomizing pressure of 3.5-4.5 kg/cm.
1. Use off the mixed paint .
2. Do not apply when temperature falls below 10c or rises above 50c and when relative humidity rises above 90%. Do not apply during rain, fog or mist
3. Brushes and spray equipment should be cleaned with Thinner,
4. Special care to be taken to close immediately the partly used Diluted Material.
Please refer to the separate Material Safety Data Sheet available with detailed information
HI - Performance Syn. Enamel Paint
Superior Durability Color Pigment System
Easy To Apply By Brush , Roller And Spray
PRODUCT PARAMETERS
1. Type : Single Pack
2. Composite : Modified Oil Based Resin with Finest Bright
Pigments, Hydrocarbon solvent and addives
3. Use Recommended Thinner to make
Applicaon Viscosity
4. Applicaon Tools : Brushing, Spraying or
Roller
5. Flash off = 30 Minutes
6. Drying Time :
Surface Dry : 4 Hours
Hard Dry : Overnight
7. Curing Time : 72 hours
8. Over coang Interval : MIN : Overnight
MAX : 5 Days
9. Color : Assorted Shades
. Finish :
10 Smooth Finish
11 Thinner / Cleaner KISOMIN THINNER
12. Shelf Life: Up to 12 Months as long as the sealed containers
are kept under cover in a dry place under normal
temperature.
SCOPE
USES
Kisomin durable synthec enamel are long lasng & solvent based
paint used for wide range of surface.
Recommended as a decorave finish coat & can be applied on
surfaces like Metal, Cement Brickwork, Asbestos Grills and Wooden
surfaces like doors, Windows, Cabinets & wide range of furniture
FEATURES/ BENEFITS
* Smooth durable finish.
* Smooth flow & easy to apply.
* Excellent coverage & hiding.
* Superior surface protecon.
KEY ATTRIBUTES
* Applicaon temperatures : 10-44 degc
PERFORMANCE PROPERTY
Chemical Resistance
A Exposures Splash & Mild Fumes/Outdoor
Spillage Resistance
cid + +
Alkalis + +
Solvent NA NA
Salt ++ ++
Water +++ +++
Flexibility +++
Adhesion +++
Excellent : +++
Very Good : ++
Good : +
SURFACE PREPARATION
APPLICATION
BRUSH
CONVENTIONAL SPRAY
NOTES :
HEALTH & SAFETY
Steel : Sand the surface with coarse Sand / water paper according to the type of surfaces to remove rust, dust & other foreign parcles. System of
Coang should be selected depending upon the type of substrate. Wipe to clean the surface. Apply single coat primer & allow to dry. Re sand the
surface with Sand paper & wipe to clean. Apply 2nd Coat of primer & allow drying for overnight. Before applicaon of paint, thin down to achieve
desired viscosity & filter through white cloth. Apply Kisomin Paint to finish.
Sr the base thoroughly and then mix to uniform consistency.
Apply without thinning
Add Kisomin thinner to adjust viscosity depending on spray condion. Use any standard equipment at an atomizing pressure of 3.5-4.5 kg/cm�².
1. Use off the mixed paint .
2. Do not apply when temperature falls below 10 C or rises above 50�°c and when relave humidity rises above 90%. Do not apply during rain, fog or mist
3. Brushes and spray equipment should be cleaned with Thinner,
4. Special care to be taken to close immediately the partly used Diluted Material.
Please refer to the separate Material Safety Data Sheet available with detailed information
Wet-on-wet application with 3 minutes flash off time.
* Single baking at 130 C for 25 min. High productivity & Low production cost.
* Recommended for welded areas as the composite system at 40-60 (Primer + Topcoat) gives minimum Salt Spray life of 240 Hrs.
* High Gloss with excellent clarity.
* High Solid formulation.
* Low thinner intake.
* High Film Build easy application.
* 400 Hrs Accelerated weathering.
* Excellent Gloss and Clarity.
* Low Bake System Suitable for plastic parts.
* No shrinkage Suitable for over coating on Stoving Top Coat.
* 800 Hrs accelerated weathering.
* Excellent Adhesion on Poly Propylene Compatible with PU Topcoat.
* Water Based Paints
* Excellent Adhesion on Metal
* Good Salt Spray Life.
* Temprature Resistant
* Non-Stick (Low Coefficient of Friction)
* Corrosion Resistant
* Ideal For Areas Exposed To High Temprature .
* Good Adhession On Mild Steel , Galvanized Steel And Aluminium Surfaces.
Contain Epoxy For Corrosion Protection And Reinforcement.
Overcoatable By A Wide Range Of Topcoats.
Stoving Primer And Topcoats
Heat Resistant Paint with Moderate Chemical Resistance Based on Silicone Resins and pigmented with Anticorrosive and Heat Resistance Pigments.
Suitable for automobile silencers exterior coating
The following finishes are available in Pure Epoxy Powder.
Dead Matt
Glossy
Satin
Structure
The finishes available are
Matt
Structure / Texture
Satin
Hammer tone
Semi Glossy
Antiques
Glossy
Transparent
Type of finishes available are
Matt
Structure / Texture
Satin
Transparent
Glossy
Available in Black
Temperature Resistance upto 600 C
Low Bake System. Suitable for plastic parts.
800 Hrs accelerated weathering
N. C. Sealer
Top Coat Lacquer Matt
Top Coat Lacquer Semi Glossy
Top Coat Lacquer Glossy
Wood Stains
Available in NC, PU and Melamine Grades
Suitable for Wooden Furniture and wood works
Easy To Clean
Stain And Dirt Resistant
Excellent Adhession
High Performance Non Yellowing & Long Lasting Protection Against UV Degradation.
Easy To Clean
Stain And Dirt Resistant
Excellent Adhession
High Performance Non Yellowing & Long Lasting Protection Against UV Degradation.
General Purpose Thinner
Rohs Compliant
Quick Dry Thinner
High Purity Solvent Blend
Rohs Compliant
Epoxy Thinner Is Clear And Water-like Liquid.
Improve Flowability , Making Easy To Mix And Pour
A. PRODUCT DESCRIPTION:
These are Paint thinners. These are designed to improve the flow of a range of MARLAC Paint products. Can also be used as a cleaner for metal cleaning, pumps and tools before and after applications.
B. TYPICAL USE:
Suitable as Thinner for :
1)Alkyd and Oil based Paints
2)Epoxy Paints
3)Polyurethane paints
4)All types of Stoving and Air drying paints
5)Cleaning thinner
C. COLOUR:
Colourless clear liquid.
D. PRODUCT DATA:
(a) Boiling Range : Calculated
(b) Flash Point : As Per Std
(c) Density : 0.85 + 0.1
The data may slightly vary depending on the properties of the RM Solvents used.
E. PACKAGING:
5 or 20 Lt Drum
F. STORAGE:
The material must be stored as per the regulations. Keep the containers in Dry, Cool, Well Ventilated
space and away from the source of Heat and ignition. Containers must be kept tightly closed. Handle with care.
G. SHELF LIFE:
Minimum 12 months, provided stored properly.
H. HEALTH AND SAFETY:
Please follow the precautionary advices on the container. Use under well ventilated conditions. Do not
inhale spray mist. Avoid Skin contact. Spillage on the skin should immediately be removed with
suitable cleanser, soap and water. Eyes should be well flushed with water and medical attention sought
immediately.
I. DISCLAIMER:
The information in this document is given to the best of MIPPLâ??s knowledge, based on the laboratory
testing and practical knowledge. MIPPL reserves the right to revise the data without further notice.
Users should always consult MIPPL for specific guidance on the general suitability of this product for their needs and specific practices.
