The Best Replacement of Traditional Woven Belt
Shengyuan high-speed needle punched corrugated cardboard conveyor belt/Overpass traction belt has advantages as below:
A. High speed, high wear resistance(more than 350m/min)
B. High belt surface flatness, good elasticity, is more beneficial to improve the quality of cardboard.
C. Water absorption and dehumidification performance are better than the similar product in the current domestic and foreign markets.
D. Normal service life is more than 40 million extension meters.
E. There is no significant geometry change of the belt during the whole production process.
THE TESTINGLAB OF CHINA PACKING RESEARCH&TEST CENTER
No. 2006-1T-005
No. Test items Unit Standard requirements Test results Conclusion
1 Performance / Flat surface
Uniform color
Warp and weft lines are well textured
No hard sundries,defects such as voids,cracks,stains,etc.
Straight edge
No obvious warping and serrated edges Flat surface
Uniform color
Warp and weft lines are well textured
No hard sundries,defects such as voids,cracks,stains,etc.
Straight edge
No obvious warping and serrated edges Qualified
2 Size deviation(width) mm ±10 -3 Qualified
3 Size deviation(thickness) mm ±0.5 0.2~0.5 Qualified
4 Mass deviation per unit area % ±3.0 2.3 Qualified
5 Tensile strength(warp-wise) KN/40mm â?¥8.5 11.1 Qualified
6 Tensile strength(width-wise) KN/40mm â?¥4.0 6.1 Qualified
7 Thermostability(warp-wise stretch) % -1.5~0.5 0.5 Qualified
8 Thermostability(width-wise stretch) % â?¤2.0 1.7 Qualified
9 Warp-wise dynamic friction coefficient / â?¥0.32 0.38 Qualified
10 permeability cm³/
(cm³*min*kpa) â?¥0.9*10³ 0.95*10³ Qualified
NOTE: Sample thickness: 10mm
The data in the table shows that all test indexes of Shengyuan card needle puncture zone are higher than the national standard.
The sample is taken with a length of 20 mm and a width of 60 mm at a high temperature of 200 ºC with a tension of 0.72KN for 10 minutes to test the results.
It is proved that the belt keeps the geometric dimension unchanged during normal operation.
A conveyor belt is a looped belt that is driven by and wrapped around one or more pulleys. It is powered by an electric motor and supported by a metal plate bed or rollers upon which the conveyor belt rests. The pulley that powers a conveyor belt is referred to as the drive pulley and has an unpowered idler pulley.
ith an impressive growth record in this highly competitive industry, we are providing a qualitative range of KIC Belt Conveyor Roller. Belt Conveyor Roller which forms a continuous top and is supported by large chain rollers. Roller is ideal for conveying and/or assembling large heavy products, such as automobiles, heavy trucks, earth moving equipment, steel coils, commercial air conditioners, snowmobiles, ATV's, motorcycles, or for the assembly of engines, brakes, axles, transmissions, compressors and other components. Features: Highly durable Precisely designed Excellent strength
Liaoning Shengyuan Industrial Co.,Ltd professional supply felt products for aluminum profile industry. Products include: A. Endless transfer belts B. Roller covers C. Felt pads D. Spacer bar covers E. Timing belt with felt covers F. Woven high temperature belts Roller covers series products include: a. PBO KEVLAR Felt Roller Covers Temperature resistance: continual 550, peaking at 650 Minimal diameter:33-230mm Length: Any length Thickness: 5-12mm b. KEVLAR roller covers Temperature resistance: continual 480, peaking at 550 Minimal diameter:33-230mm Length: Any length Thickness: 5-12mm c. NOMEX roller covers Temperature resistance: continual 280, peaking at 370 Minimal diameter: 33-230mm Length: Any length Thickness: 5-12mm d. POLYESTER Temperature resistance: continual 180, peaking at 260 Minimal diameter: 33-230mm Length: Any length Thickness: 5-12mm Contact informationï¼? Emailï¼?sales@lnshengyuan.cn Mob/Whatsappï¼?+8615140230656
Liaoning Shengyuan Industrial Co.,Ltd professional supply felt products for aluminum profile industry. Products include: A. Endless transfer belts B. Roller covers C. Felt pads D. Spacer bar covers E. Timing belt with felt covers F. Woven high temperature belts Endless transfer belts series products include: a. PBO+KEVLAR temperature resistance: 550, peaking at 650 Width: 50-3600mm Length: 1700-100000mm Thickness: 2-12mm b. KEVLAR Temperature resistance: 480ï¼?peaking at 550 Width: 50-3600mm Length: 1700-100000mm Thickness: 2-12mm c. NOMEX Temperature resistance: 280ï¼?peaking at 370 Width: 50-3600mm Length: 1700-100000mm Thickness: 2-12mm d. POLYESTER Temperature resistance: 180ï¼?peaking at 260 Width: 50-3600mm Length: 1700-100000mm Thickness: 2-12mm Contact informationï¼? Emailï¼?sales@lnshengyuan.cn Mob/Whatsappï¼?+8615140230656
Supplier: Needle punched conveyor belt for corrugated board, endless transfer belt/roller covers/pads/spacer bar covers for aluminum profile
Owing to our rich industry knowledge and high-quality product range, we have attained a huge client base all across the nation. Reasons for which we have become the foremost choice of patrons are: High-quality products Skilled team of professionals Ethical business policies Easy payment modes Transparent dealings Wide distribution network Customized packaging
We are providing Drum Pulley that is appreciated by the clients for continuous operation, increased bearing life and less power consumption. In order to offer quality Drum Pulley, we use heavy tubes fabricated from steel plates to manufacture the shell. Further, the pulley shafts are made up of carbon steel machined with proper bore and key way. We are also capable of offering taper lock bushings along with our range of Conveyor Pulleys. The pulley drum is grooved with rubber lagging properly to resist slippage and the shafts are equipped with anti-friction self-aligning ball bearings
Supplier: Conveyor rollers, carrying rollers, return rollers, conveyor idlers, belt conveyor roller, smsr gearbox, belt conveyor pulley, v belt pulley, conveyor roller bearing housing, conveyor belt, stone crusher parts, ci casting, casting parts, sg castings, die casting
Compared with normal belt conveyors, belt conveyors are preferable for sharing loosened and light-weight products, such as timber chips, shavings, grain, and so on. This tool is used to connect other devices and timber pellet mill offer for sale. Compared to the frame belt sharing, the trough sharing has adequate deepness of the trough, and the light specific gravity material can be shared quicker, and it is not ideal for spilling. At the same time, the feeding trough of the trough belt conveyor can be tailored according to client requirements such as deepness, size, size as well as other technical needs, and also can additionally be fully enclosed to minimize dirt contamination during devices operation. ( 8) Bucket elevator Bucket elevators are generally aimed at the upright communicating of granular products and also powdered products. Compared to belt conveyors, because of the vertical conveying technique, they have extra advantages than belt conveyors in terms of conveying height as well as flooring room. Our business mainly produces three sorts of bucket lifts: 160, 250, as well as 350. We can customize various elevations ( backwards and forwards 3 meters), products (carbon steel, stainless steel), transmission methods (chains, tapes) as well as receptacles according to customer demands. Material (plastic, carbon steel, stainless steel). This gadget is utilized to link various other tools as well as the timber pellet mill up
