The Best Replacement of Traditional Woven Belt
Shengyuan high-speed needle punched corrugated cardboard conveyor belt/Overpass traction belt has advantages as below:
A. High speed, high wear resistance(more than 350m/min)
B. High belt surface flatness, good elasticity, is more beneficial to improve the quality of cardboard.
C. Water absorption and dehumidification performance are better than the similar product in the current domestic and foreign markets.
D. Normal service life is more than 40 million extension meters.
E. There is no significant geometry change of the belt during the whole production process.
THE TESTINGLAB OF CHINA PACKING RESEARCH&TEST CENTER
No. 2006-1T-005
No. Test items Unit Standard requirements Test results Conclusion
1 Performance / Flat surface
Uniform color
Warp and weft lines are well textured
No hard sundries,defects such as voids,cracks,stains,etc.
Straight edge
No obvious warping and serrated edges Flat surface
Uniform color
Warp and weft lines are well textured
No hard sundries,defects such as voids,cracks,stains,etc.
Straight edge
No obvious warping and serrated edges Qualified
2 Size deviation(width) mm ±10 -3 Qualified
3 Size deviation(thickness) mm ±0.5 0.2~0.5 Qualified
4 Mass deviation per unit area % ±3.0 2.3 Qualified
5 Tensile strength(warp-wise) KN/40mm â?¥8.5 11.1 Qualified
6 Tensile strength(width-wise) KN/40mm â?¥4.0 6.1 Qualified
7 Thermostability(warp-wise stretch) % -1.5~0.5 0.5 Qualified
8 Thermostability(width-wise stretch) % â?¤2.0 1.7 Qualified
9 Warp-wise dynamic friction coefficient / â?¥0.32 0.38 Qualified
10 permeability cm³/
(cm³*min*kpa) â?¥0.9*10³ 0.95*10³ Qualified
NOTE: Sample thickness: 10mm
The data in the table shows that all test indexes of Shengyuan card needle puncture zone are higher than the national standard.
The sample is taken with a length of 20 mm and a width of 60 mm at a high temperature of 200 ºC with a tension of 0.72KN for 10 minutes to test the results.
It is proved that the belt keeps the geometric dimension unchanged during normal operation.
Liaoning Shengyuan Industrial Co.,Ltd professional supply felt products for aluminum profile industry. Products include:
A. Endless transfer belts
B. Roller covers
C. Felt pads
D. Spacer bar covers
E. Timing belt with felt covers
F. Woven high temperature belts
Endless transfer belts series products include:
a. PBO+KEVLAR
temperature resistance: 550, peaking at 650
Width: 50-3600mm
Length: 1700-100000mm
Thickness: 2-12mm
b. KEVLAR
Temperature resistance:
480ï¼?peaking at 550
Width: 50-3600mm
Length: 1700-100000mm
Thickness: 2-12mm
c. NOMEX
Temperature resistance:
280ï¼?peaking at 370
Width: 50-3600mm
Length: 1700-100000mm
Thickness: 2-12mm
d. POLYESTER
Temperature resistance:
180ï¼?peaking at 260
Width: 50-3600mm
Length: 1700-100000mm
Thickness: 2-12mm
Contact informationï¼?
Emailï¼?sales@lnshengyuan.cn
Mob/Whatsappï¼?+8615140230656
Liaoning Shengyuan Industrial Co.,Ltd professional supply felt products for aluminum profile industry. Products include:
A. Endless transfer belts
B. Roller covers
C. Felt pads
D. Spacer bar covers
E. Timing belt with felt covers
F. Woven high temperature belts
Roller covers series products include:
a. PBO KEVLAR Felt Roller Covers
Temperature resistance: continual 550, peaking at 650
Minimal diameter:33-230mm
Length: Any length
Thickness: 5-12mm
b. KEVLAR roller covers
Temperature resistance: continual 480, peaking at 550
Minimal diameter:33-230mm
Length: Any length
Thickness: 5-12mm
c. NOMEX roller covers
Temperature resistance: continual 280, peaking at 370
Minimal diameter: 33-230mm
Length: Any length
Thickness: 5-12mm
d. POLYESTER
Temperature resistance: continual 180, peaking at 260
Minimal diameter: 33-230mm
Length: Any length
Thickness: 5-12mm
Contact informationï¼?
Emailï¼?sales@lnshengyuan.cn
Mob/Whatsappï¼?+8615140230656
Liaoning Shengyuan Industrial Co.,Ltd professional supply felt products for aluminum profile industry. Products include:
A. Endless transfer belts
B. Roller covers
C. Felt pads
D. Spacer bar covers
E. Timing belt with felt covers
F. Woven high temperature belts
Felt pads series products include:
a. PBO+Kevlar pads
Material: PBO+Kevlar
Temperature resistantce: Continual 550, peaking at 650
Thickness:2-12mm
b. Kevlar pads
Material: Kevlar
Temperature resistantce: Continual 480, peaking at 550
Thickness:2-12mm
c. Nomex pads
Material: Nomex
Temperature resistantce: Continual 280, peaking at 370
Thickness:2-12mm
d. Polyester pads
Material: Polyester
Temperature resistantce: Continual 180, peaking at 260
Thickness:2-12mm
Contact informationï¼?
Emailï¼?sales@lnshengyuan.cn
Mob/Whatsappï¼?+8615140230656
Liaoning Shengyuan Industrial Co.,Ltd professional supply felt products for aluminum profile industry. Products include:
A. Endless transfer belts
B. Roller covers
C. Felt pads
D. Spacer bar covers
E. Timing belt with felt covers
F. Woven high temperature belts
Felt pads series products include:
a. PBO+Kevlar pads
Material: PBO+Kevlar
Temperature resistantce: Continual 550, peaking at 650
Thickness:2-12mm
b. Kevlar pads
Material: Kevlar
Temperature resistantce: Continual 480, peaking at 550
Thickness:2-12mm
c. Nomex pads
Material: Nomex
Temperature resistantce: Continual 280, peaking at 370
Thickness:2-12mm
d. Polyester pads
Material: Polyester
Temperature resistantce: Continual 180, peaking at 260
Thickness:2-12mm
Contact informationï¼?
Emailï¼?sales@lnshengyuan.cn
Mob/Whatsappï¼?+8615140230656
The Best Replacement of Traditional Woven Belt
Shengyuan high-speed needle punched corrugated cardboard conveyor belt/Overpass traction belt has advantages as below:
A. High speed, high wear resistance(more than 350m/min)
B. High belt surface flatness, good elasticity, is more beneficial to improve the quality of cardboard.
C. Water absorption and dehumidification performance are better than the similar product in the current domestic and foreign markets.
D. Normal service life is more than 40 million extension meters.
E. There is no significant geometry change of the belt during the whole production process.
THE TESTINGLAB OF CHINA PACKING RESEARCH&TEST CENTER
No. 2006-1T-005
No. Test items Unit Standard requirements Test results Conclusion
1 Performance / Flat surface
Uniform color
Warp and weft lines are well textured
No hard sundries,defects such as voids,cracks,stains,etc.
Straight edge
No obvious warping and serrated edges Flat surface
Uniform color
Warp and weft lines are well textured
No hard sundries,defects such as voids,cracks,stains,etc.
Straight edge
No obvious warping and serrated edges Qualified
2 Size deviation(width) mm ±10 -3 Qualified
3 Size deviation(thickness) mm ±0.5 0.2~0.5 Qualified
4 Mass deviation per unit area % ±3.0 2.3 Qualified
5 Tensile strength(warp-wise) KN/40mm â?¥8.5 11.1 Qualified
6 Tensile strength(width-wise) KN/40mm â?¥4.0 6.1 Qualified
7 Thermostability(warp-wise stretch) % -1.5~0.5 0.5 Qualified
8 Thermostability(width-wise stretch) % â?¤2.0 1.7 Qualified
9 Warp-wise dynamic friction coefficient / â?¥0.32 0.38 Qualified
10 permeability cm³/
(cm³*min*kpa) â?¥0.9*10³ 0.95*10³ Qualified
NOTE: Sample thickness: 10mm
The data in the table shows that all test indexes of Shengyuan card needle puncture zone are higher than the national standard.
The sample is taken with a length of 20 mm and a width of 60 mm at a high temperature of 200 ºC with a tension of 0.72KN for 10 minutes to test the results.
It is proved that the belt keeps the geometric dimension unchanged during normal operation.
Liaoning Shengyuan Industrial Co.,Ltd professional supply felt products for aluminum profile industry. Products include:
A. Endless transfer belts
B. Roller covers
C. Felt pads
D. Spacer bar covers
E. Timing belt with felt covers
F. Woven high temperature belts
Felt pads series products include:
a. PBO+Kevlar pads
Material: PBO+Kevlar
Temperature resistantce: Continual 550, peaking at 650
Thickness:2-12mm
b. Kevlar pads
Material: Kevlar
Temperature resistantce: Continual 480, peaking at 550
Thickness:2-12mm
c. Nomex pads
Material: Nomex
Temperature resistantce: Continual 280, peaking at 370
Thickness:2-12mm
d. Polyester pads
Material: Polyester
Temperature resistantce: Continual 180, peaking at 260
Thickness:2-12mm
