The Best Replacement of Traditional Woven Belt Shengyuan high-speed needle punched corrugated cardboard conveyor belt/Overpass traction belt has advantages as below: A. High speed, high wear resistance(more than 350m/min) B. High belt surface flatness, good elasticity, is more beneficial to improve the quality of cardboard. C. Water absorption and dehumidification performance are better than the similar product in the current domestic and foreign markets. D. Normal service life is more than 40 million extension meters. E. There is no significant geometry change of the belt during the whole production process. THE TESTINGLAB OF CHINA PACKING RESEARCH&TEST CENTER No. 2006-1T-005 No. Test items Unit Standard requirements Test results Conclusion 1 Performance / Flat surface Uniform color Warp and weft lines are well textured No hard sundries,defects such as voids,cracks,stains,etc. Straight edge No obvious warping and serrated edges Flat surface Uniform color Warp and weft lines are well textured No hard sundries,defects such as voids,cracks,stains,etc. Straight edge No obvious warping and serrated edges Qualified 2 Size deviation(width) mm ±10 -3 Qualified 3 Size deviation(thickness) mm ±0.5 0.2~0.5 Qualified 4 Mass deviation per unit area % ±3.0 2.3 Qualified 5 Tensile strength(warp-wise) KN/40mm â?¥8.5 11.1 Qualified 6 Tensile strength(width-wise) KN/40mm â?¥4.0 6.1 Qualified 7 Thermostability(warp-wise stretch) % -1.5~0.5 0.5 Qualified 8 Thermostability(width-wise stretch) % â?¤2.0 1.7 Qualified 9 Warp-wise dynamic friction coefficient / â?¥0.32 0.38 Qualified 10 permeability cm³/ (cm³*min*kpa) â?¥0.9*10³ 0.95*10³ Qualified NOTE: Sample thickness: 10mm The data in the table shows that all test indexes of Shengyuan card needle puncture zone are higher than the national standard. The sample is taken with a length of 20 mm and a width of 60 mm at a high temperature of 200 ºC with a tension of 0.72KN for 10 minutes to test the results. It is proved that the belt keeps the geometric dimension unchanged during normal operation.
A conveyor belt is a looped belt that is driven by and wrapped around one or more pulleys. It is powered by an electric motor and supported by a metal plate bed or rollers upon which the conveyor belt rests. The pulley that powers a conveyor belt is referred to as the drive pulley and has an unpowered idler pulley.
Liaoning Shengyuan Industrial Co.,Ltd professional supply felt products for aluminum profile industry. Products include: A. Endless transfer belts B. Roller covers C. Felt pads D. Spacer bar covers E. Timing belt with felt covers F. Woven high temperature belts Felt pads series products include: a. PBO+Kevlar pads Material: PBO+Kevlar Temperature resistantce: Continual 550, peaking at 650 Thickness:2-12mm b. Kevlar pads Material: Kevlar Temperature resistantce: Continual 480, peaking at 550 Thickness:2-12mm c. Nomex pads Material: Nomex Temperature resistantce: Continual 280, peaking at 370 Thickness:2-12mm d. Polyester pads Material: Polyester Temperature resistantce: Continual 180, peaking at 260 Thickness:2-12mm Contact informationï¼? Emailï¼?sales@lnshengyuan.cn Mob/Whatsappï¼?+8615140230656
ith an impressive growth record in this highly competitive industry, we are providing a qualitative range of KIC Belt Conveyor Roller. Belt Conveyor Roller which forms a continuous top and is supported by large chain rollers. Roller is ideal for conveying and/or assembling large heavy products, such as automobiles, heavy trucks, earth moving equipment, steel coils, commercial air conditioners, snowmobiles, ATV's, motorcycles, or for the assembly of engines, brakes, axles, transmissions, compressors and other components. Features: Highly durable Precisely designed Excellent strength
The Best Replacement of Traditional Woven Belt Shengyuan high-speed needle punched corrugated cardboard conveyor belt/Overpass traction belt has advantages as below: A. High speed, high wear resistance(more than 350m/min) B. High belt surface flatness, good elasticity, is more beneficial to improve the quality of cardboard. C. Water absorption and dehumidification performance are better than the similar product in the current domestic and foreign markets. D. Normal service life is more than 40 million extension meters. E. There is no significant geometry change of the belt during the whole production process. THE TESTINGLAB OF CHINA PACKING RESEARCH&TEST CENTER No. 2006-1T-005 No. Test items Unit Standard requirements Test results Conclusion 1 Performance / Flat surface Uniform color Warp and weft lines are well textured No hard sundries,defects such as voids,cracks,stains,etc. Straight edge No obvious warping and serrated edges Flat surface Uniform color Warp and weft lines are well textured No hard sundries,defects such as voids,cracks,stains,etc. Straight edge No obvious warping and serrated edges Qualified 2 Size deviation(width) mm ±10 -3 Qualified 3 Size deviation(thickness) mm ±0.5 0.2~0.5 Qualified 4 Mass deviation per unit area % ±3.0 2.3 Qualified 5 Tensile strength(warp-wise) KN/40mm â?¥8.5 11.1 Qualified 6 Tensile strength(width-wise) KN/40mm â?¥4.0 6.1 Qualified 7 Thermostability(warp-wise stretch) % -1.5~0.5 0.5 Qualified 8 Thermostability(width-wise stretch) % â?¤2.0 1.7 Qualified 9 Warp-wise dynamic friction coefficient / â?¥0.32 0.38 Qualified 10 permeability cm³/ (cm³*min*kpa) â?¥0.9*10³ 0.95*10³ Qualified NOTE: Sample thickness: 10mm The data in the table shows that all test indexes of Shengyuan card needle puncture zone are higher than the national standard. The sample is taken with a length of 20 mm and a width of 60 mm at a high temperature of 200 ºC with a tension of 0.72KN for 10 minutes to test the results. It is proved that the belt keeps the geometric dimension unchanged during normal operation.
Individual blister pack. 100pcs/inner box, 5000pcs/export carton Carton Dimension: 51x45x23 Loading Capacity for 1x40HQ: 1265 Ctns Sterile, non-toxic, non-pyrogenic. Sharp and strong needle cannula. Needle Gauge: 30G, 29G, 28G, 27G, 26G, 25G, 24G, 23G, 22G, 21G, 20G,19G,18G,16G. Needle Length: 1/2", 5/8", 3/4", 1", 1 1/4", 1 1/2"
Needle Punching is a non-woven product that has high durability, strength and density. Needle Punching is a textile made of polymer material, which is water permeable, in the form of woven, knitted or non-woven (non-woven) used by geotechnical and civil engineering. Non Woven Geotextile (Non Woven) is a non- woven geotextile, the process of joining the forming fibers occurs due to a mechanical process by puncture of small needles or united by heat. It has been widely used for air filter, automotive and other applications. Almost all famous car brands have used our products. Our advantage is the strong damping power to perfectly dampen the sound vibrations of the engine, so that driving is comfortable.
Liaoning Shengyuan Industrial Co.,Ltd professional supply felt products for aluminum profile industry. Products include: A. Endless transfer belts B. Roller covers C. Felt pads D. Spacer bar covers E. Timing belt with felt covers F. Woven high temperature belts Roller covers series products include: a. PBO KEVLAR Felt Roller Covers Temperature resistance: continual 550, peaking at 650 Minimal diameter:33-230mm Length: Any length Thickness: 5-12mm b. KEVLAR roller covers Temperature resistance: continual 480, peaking at 550 Minimal diameter:33-230mm Length: Any length Thickness: 5-12mm c. NOMEX roller covers Temperature resistance: continual 280, peaking at 370 Minimal diameter: 33-230mm Length: Any length Thickness: 5-12mm d. POLYESTER Temperature resistance: continual 180, peaking at 260 Minimal diameter: 33-230mm Length: Any length Thickness: 5-12mm Contact informationï¼? Emailï¼?sales@lnshengyuan.cn Mob/Whatsappï¼?+8615140230656
Liaoning Shengyuan Industrial Co.,Ltd professional supply felt products for aluminum profile industry. Products include: A. Endless transfer belts B. Roller covers C. Felt pads D. Spacer bar covers E. Timing belt with felt covers F. Woven high temperature belts Endless transfer belts series products include: a. PBO+KEVLAR temperature resistance: 550, peaking at 650 Width: 50-3600mm Length: 1700-100000mm Thickness: 2-12mm b. KEVLAR Temperature resistance: 480ï¼?peaking at 550 Width: 50-3600mm Length: 1700-100000mm Thickness: 2-12mm c. NOMEX Temperature resistance: 280ï¼?peaking at 370 Width: 50-3600mm Length: 1700-100000mm Thickness: 2-12mm d. POLYESTER Temperature resistance: 180ï¼?peaking at 260 Width: 50-3600mm Length: 1700-100000mm Thickness: 2-12mm Contact informationï¼? Emailï¼?sales@lnshengyuan.cn Mob/Whatsappï¼?+8615140230656
Needle punched conveyor belt for corrugated board, endless transfer belt/roller covers/pads/spacer bar covers for aluminum profile.
Bar mops, dish cloth, duster cloth, floor cleaning cloth, stockinet rolls, face cloth, hand towels, bath towels, beach towels, kitchen towels, tea towels ( stripped, checked, printed, embroidered, jacquard ), waffle weave kitchen towels, glass cloth, herringbone kitchen towels, terry tea towels, mono check tea towels, aprons, pot holders, hot pad, oven mitts, silicon oven mitt, terry oven mitt, pan grabbers, chef hat, caps, socks ( cotton, polyester ), cotton rag rugs & mat, bed sheets, table cloth, napkins, cushion covers, thermal blankets, fleece blankets, mink blankets, floor carpet, cotton bags, tote bags, shopping bags, jute bags, paper / board bags, fruit picking bags, coin bags, cotton webbing tape, cotton/ polyester braided cards, home textiles & made ups, jute webbing, pp webbing, soft plant tie, coconut coir pith / peat..
Owing to our rich industry knowledge and high-quality product range, we have attained a huge client base all across the nation. Reasons for which we have become the foremost choice of patrons are: High-quality products Skilled team of professionals Ethical business policies Easy payment modes Transparent dealings Wide distribution network Customized packaging
Liaoning Shengyuan Industrial Co.,Ltd professional supply felt products for aluminum profile industry. Products include: A. Endless transfer belts B. Roller covers C. Felt pads D. Spacer bar covers E. Timing belt with felt covers F. Woven high temperature belts Felt pads series products include: a. PBO+Kevlar pads Material: PBO+Kevlar Temperature resistantce: Continual 550, peaking at 650 Thickness:2-12mm b. Kevlar pads Material: Kevlar Temperature resistantce: Continual 480, peaking at 550 Thickness:2-12mm c. Nomex pads Material: Nomex Temperature resistantce: Continual 280, peaking at 370 Thickness:2-12mm d. Polyester pads Material: Polyester Temperature resistantce: Continual 180, peaking at 260 Thickness:2-12mm Contact informationï¼? Emailï¼?sales@lnshengyuan.cn Mob/Whatsappï¼?+8615140230656
Liaoning Shengyuan Industrial Co.,Ltd professional supply felt products for aluminum profile industry. Products include: A. Endless transfer belts B. Roller covers C. Felt pads D. Spacer bar covers E. Timing belt with felt covers F. Woven high temperature belts Felt pads series products include: a. PBO+Kevlar pads Material: PBO+Kevlar Temperature resistantce: Continual 550, peaking at 650 Thickness:2-12mm b. Kevlar pads Material: Kevlar Temperature resistantce: Continual 480, peaking at 550 Thickness:2-12mm c. Nomex pads Material: Nomex Temperature resistantce: Continual 280, peaking at 370 Thickness:2-12mm d. Polyester pads Material: Polyester Temperature resistantce: Continual 180, peaking at 260 Thickness:2-12mm
We are providing Drum Pulley that is appreciated by the clients for continuous operation, increased bearing life and less power consumption. In order to offer quality Drum Pulley, we use heavy tubes fabricated from steel plates to manufacture the shell. Further, the pulley shafts are made up of carbon steel machined with proper bore and key way. We are also capable of offering taper lock bushings along with our range of Conveyor Pulleys. The pulley drum is grooved with rubber lagging properly to resist slippage and the shafts are equipped with anti-friction self-aligning ball bearings
Sterile Hypodermic Syringes with Needle for Single Use US$ 0.5 / Carton Get Freight Cost Calculate Margin 10000 Cartons Minimum Order : 20 - 90 days Product Details Model Number : ZS-05- H-SY 5ML-#3409 Brand Name : Winhealth Origin : China (mainland) Small Orders : Accepted Key Specifications/Special Features: Model No. ZS-01-H-SY 1ML, 3 ML, 5ML Brand Name: Winhealth Origin: China CE Approval Fast Delivery for Any Quantity Sterilization Independent Packaging Using Independent packaging ,after ethylene oxide sterilization, open ready tp use. All Sterile EO Processing with Single Blister Pack with Needle Pre-attached Different Sizes: 1ML, 3ML, 5ML Shipping Information: FOB Port: Shanghai Lead Time : 20 - 90 days HTS Code : 9018.31.00 Dimensions per Unit : 15 X 3 X 3 Centimeters Weight per Unit : 7 Grams Units per Export Carton : 1600 Export Carton Dimensions L/W/H: 48.5 X 40.5 X 45 Centimeters Export Carton Weight : 8.5 Kilograms Main Export Markets: Asia asia Central/South America Eastern Europe Mid East/Africa North America Western Europe Any third-party trademarks or images shown here are for reference purposes only. We are not authorized to sell any items bearing such trademarks. Payment Details: Payment Method : Telegraphic Transfer in Advance (Advance TT, T/T)
Needle-punched fabric (felt, kubu) is known for its outstanding qualities and versatile applications in various fields of life and industry. APPLICATIONS Automotive Grow Bags Geotextiles Shoes Insole Sofa Lining Filteration Handmade Carpet Felt Roofing Weed Control Fabrics SPECIFICATIONS Capacity : 15.000 tons/ year ~ 30 million meters/ year Width : 40", 44", 58", 60", max 138" Weight : 60gsm - 1.500gsm Thickness : 0.3mm - 40mm
Needle-punched fabric (felt, kubu) is known for its outstanding qualities and versatile applications in various fields of life and industry. Capacity : 15.000 tons/ year ~ 30 million meters/ year Width : 40", 44", 58", 60", max 138" Weight : 60gsm - 1.500gsm Thickness : 0.3mm - 40mm Automotive APPLICATIONS Grow Bags Geotextiles Shoes Insole Sofa Lining Filteration Handmade Carpet Felt Roofing Weed Control Fabrics
Safety Insulin Syringe with Restractable Needle Safety Characteristics: after absorbing the expected dose of liquid medicine, if transportation is needed, push up the sliding-sleeve to protect the needle tip from physical damage during transportation; push the sliding sleeve to expose the needle tip before the injection starts, when the expected dose of liquid medicine is 100% injected, manually slide the sliding sleeve to the position where the connector base can no longer slide, the needle tip is completely covered in the sliding sleeve, and then the sliding sleeve is manually rotated until it is locked, it could effectively preventing repeated use and accidental needle sticking, and avoiding cross infection.
based on the typical characteristics of safety needles in the medical field, a "GRIPPER PLUS Safety Needle" might be designed to enhance safety during medical procedures involving needle use. Safety needles often incorporate features to minimize the risk of needlestick injuries for healthcare professionals. These features may include mechanisms to retract or shield the needle after use, reducing the potential for accidental exposure to contaminated needles. Additionally, such needles often prioritize ease of use, providing a secure grip for healthcare practitioners.
