Endless Transfer Belt

Temperature resistance:continuous:350°c, speaks: 600°c.The material will lose weight turn brown , and reduce its self life if it is exposed to high temperature aluminum profile(about 700°c) for a period of time (longer than10 minutes)pbo and kevlar are thermo setting material and therefore, it will not pollute the aluminum profile. Total thickness range:1.5-15mm;common specifications are 6mm, 8mm, 10mm, 12mm Width range:20mm-3, 600mm;common specifications are 60mm, 70mm, 75mm, 80mm, 90mm, 100mm Length:1, 800mm~30, 000mm Density effective blankets part of the standard is 350g/?¢mm;standard special requirements can be customized (maximum 500g/m2.Mm) Quick details Type: seamless belt material:30% pbo + 70% kevlar, pbo Application:aluminum industry feature:heat resistance and flat Brand:oubo

Temperature resistance: Continual 550degree ,peaking at 650 degree. Minimal diameter (mm):40-230 Length (mm):any length Thinkness(mm):6-12 as your requiry .

Supplier: Needle punched conveyor belt for corrugated board, endless transfer belt/roller covers/pads/spacer bar covers for aluminum profile

Liaoning Shengyuan Industrial Co.,Ltd professional supply felt products for aluminum profile industry. Products include: A. Endless transfer belts B. Roller covers C. Felt pads D. Spacer bar covers E. Timing belt with felt covers F. Woven high temperature belts Roller covers series products include: a. PBO KEVLAR Felt Roller Covers Temperature resistance: continual 550, peaking at 650 Minimal diameter:33-230mm Length: Any length Thickness: 5-12mm b. KEVLAR roller covers Temperature resistance: continual 480, peaking at 550 Minimal diameter:33-230mm Length: Any length Thickness: 5-12mm c. NOMEX roller covers Temperature resistance: continual 280, peaking at 370 Minimal diameter: 33-230mm Length: Any length Thickness: 5-12mm d. POLYESTER Temperature resistance: continual 180, peaking at 260 Minimal diameter: 33-230mm Length: Any length Thickness: 5-12mm Contact informationï¼? Emailï¼?sales@lnshengyuan.cn Mob/Whatsappï¼?+8615140230656

The Best Replacement of Traditional Woven Belt Shengyuan high-speed needle punched corrugated cardboard conveyor belt/Overpass traction belt has advantages as below: A. High speed, high wear resistance(more than 350m/min) B. High belt surface flatness, good elasticity, is more beneficial to improve the quality of cardboard. C. Water absorption and dehumidification performance are better than the similar product in the current domestic and foreign markets. D. Normal service life is more than 40 million extension meters. E. There is no significant geometry change of the belt during the whole production process. THE TESTINGLAB OF CHINA PACKING RESEARCH&TEST CENTER   No. 2006-1T-005 No. Test items Unit Standard requirements Test results Conclusion 1 Performance / Flat surface Uniform color Warp and weft lines are well textured No hard sundries,defects such as voids,cracks,stains,etc. Straight edge No obvious warping and serrated edges Flat surface Uniform color Warp and weft lines are well textured No hard sundries,defects such as voids,cracks,stains,etc. Straight edge No obvious warping and serrated edges Qualified 2 Size deviation(width) mm ±10 -3 Qualified 3 Size deviation(thickness) mm ±0.5 0.2~0.5 Qualified 4 Mass deviation per unit area % ±3.0 2.3 Qualified 5 Tensile strength(warp-wise) KN/40mm â?¥8.5 11.1 Qualified 6 Tensile strength(width-wise) KN/40mm â?¥4.0 6.1 Qualified 7 Thermostability(warp-wise stretch) % -1.5~0.5 0.5 Qualified 8 Thermostability(width-wise stretch) % â?¤2.0 1.7 Qualified 9 Warp-wise dynamic friction coefficient / â?¥0.32 0.38 Qualified 10 permeability cm³/ (cm³*min*kpa) â?¥0.9*10³ 0.95*10³ Qualified NOTE: Sample thickness: 10mm The data in the table shows that all test indexes of Shengyuan card needle puncture zone are higher than the national standard. The sample is taken with a length of 20 mm and a width of 60 mm at a high temperature of 200 ºC with a tension of 0.72KN for 10 minutes to test the results. It is proved that the belt keeps the geometric dimension unchanged during normal operation.

Type: Normal sidewall belt , Transverse rigid sidewall belt Structure: base belt , sidewall ,cleat Base belt has fabric belt,steel cord belt and steel mesh belt Sidewall: S type and W type Cleat: T type and TC type Usage and Advantage 1Suitable for bulk material transportation of Angle 0 ° ~ 90 ° 2Has widely usage, small cover area, reduce construction investment,low maintenance cost,throughput continuous, high efficiency, large Angle transport, low freight, and shorten the transportation distance, Save manpower material resources etc.features 3To solve the angle problem which ordinary conveyor belt and chevron belt couldnt to achieve 4According to the use environment, design complete and independent transmission system to avoid the discontinuity ascension and complex transportation system. 5Convey a variety of bulk materials from level, tilt, vertical and changed direction angle. Such as coal, ore, sand to fertilizers and food etc 6Unlimited material particle size, from small size to 400 mm large granularity, throughput could be from 1m³/h to 6000m³/h.0

Type: Normal sidewall belt , Transverse rigid sidewall belt Structure: base belt , sidewall ,cleat Base belt has fabric belt,steel cord belt and steel mesh belt Sidewall: S type and W type Cleat: T type and TC type Usage and Advantage 1Suitable for bulk material transportation of Angle 0 ° ~ 90 ° 2Has widely usage, small cover area, reduce construction investment,low maintenance cost,throughput continuous, high efficiency, large Angle transport, low freight, and shorten the transportation distance, Save manpower material resources etc.features 3To solve the angle problem which ordinary conveyor belt and chevron belt couldnt to achieve 4According to the use environment, design complete and independent transmission system to avoid the discontinuity ascension and complex transportation system. 5Convey a variety of bulk materials from level, tilt, vertical and changed direction angle. Such as coal, ore, sand to fertilizers and food etc 6Unlimited material particle size, from small size to 400 mm large granularity, throughput could be from 1m³/h to 6000m³/h.0

Our company produces the endless conveyor belt, jointless belt core with single layer framework fabric under winding process. both ends of shaped vulcanized conveyor belt are standardized, no bellmouth, no deviation.The covering rubber use high strength wear resistance rubber formulation, it has the features of long service life, uniform thickness, smooth surface, smooth running and accurate measurement. We produce various types of rubber products including fabric core layer conveyor belt,Steel cord conveyor belt,Raised edge conveyor belt,patterned conveyor belt,endless conveyor belt and the rubber plate.Please contact us to find products with reliable quality and competitive price!

Kevlar endless belt Item no. : cfl-02-480 Material : kevlar / kevlar+carbon Working temp : 480? Length : 1600mm-13800mm Thickness : 6-12mm Width : according to request Color: brown / green