Epoxy & Pu Based Industrial Paints

PRODUCT RANGE 1) SU-EPO-PRIME-10 : Two pack Epoxy-polyamide Zinc phosphate Red oxide Primer, direct application on ferrous metals. 2) SU-EPO-PRIME-20: Two pack Epoxy-polyamide Zinc chromate yellow primer, universally recommended for direct application on Ferrous as well as non ferrous metals like Aluminum, galvanized, stainless steel, zinc alloy, casting etc. 3) SU-EPO-PRIME-30 (H.B.) : This is high solid two pack epoxy-polyamide Zinc phosphate Grey primer, recommended for direct application on Ferrous metals. 4) SU-EPO-PRIME-40: Two pack epoxy-polyamide clear primer, recommended for direct application on concrete & wood substrates. 5) SU-EPO-ZR-PRIME-50: Two pack epoxy-polyamide Zinc rich Epoxy primer, recommended for direct application on steel surface prepared by abrasive blast cleaning. 6) SU-THANE-PRIME-60 : Two pack Polyurethane Grey primer, recommended to plastic substrates like FRP, ABS etc. 7) SU-THANE-SRF-70 : Two pack Polyurethane Grey Surfacer. This is an intermediate coat for preparing smooth surface for Polyurethane top coats, recommended for application on Ferrous metals & FRP substrates after Epoxy or Polyurethane primer coat. This product can be overcoated with our polyurethane top coats 8) SU-PP-PRIME-80 : Single pack excellent adhesion promoter primer for Polypropylene (PP) surface. It gives excellent intercoat adhesion when top coated with Polyurethane paint. Provides very good water resistance, petrol resistance etc. 9) SU-PRIME-SP-90 : Single pack zinc phosphate, Quick Drying primer. 10) SU-TOP-SP-94 : Single pack Alkyd base special polymer Quick drying finish paints for High Performance. Excellent combination of mechanical & chemical resistance properties. 11) SU-EH-PRIME-92 : Single pack PVB primer, This product is universally recommended for direct application on Ferrous as well as non-ferrous substrate, after proper surface preparation. It provides excellent adhesion on these metals and provides very good formulation for subsequent top coat. This primer coat can be overcoated with alkyds, Chlorinated rubber paint , epoxy and polyurethane top coats. 12) SU-GUARD-TOP-100 : Two pack Epoxy-polyamide, cold cured finish coat. It possesses excellent abrasion resistance, very good adhesion, flexibility and chemical resistance etc. 13) SU-GUARD-CT-131 : Two pack Epoxy polyamide based self priming, high build Coal Tar coating system for high performance. This product is universally recommended to marine project structures, tanks, pipelines & process industries 14) SU-GUARD-MIO-133 : Two pack Polyamide cured Epoxy based Micaceous Iron Oxide pigmented Intermediate Coat. Suitable for protection of steel structure in aggressive coastal and industrial atmosphere. 15) SU-EPO-UNICOAT-150 : Two pack Epoxy cold-cured polyamide self-priming paint system, functions as a primer cum topcoat. This product is recommended for direct application on ferrous metals only.

Specifications 1.odorless 2.low VOC 3.antimicrobial 4. mildew resistant 5.environmentally friendly 6.waterproof 7.Scrub resistance Description It is an enhanced mildew proof product adopting nano-scale Ag+ antimicrobial and mildew proof technology, integrating odorless formula, with fresh product smell, smooth paint film, durable and beautiful paint.As an affordable and environmentally friendly product with excellent decorative performance, it is characterized by fresh smell, environmental health, strong covering power, large painting area, convenient constructionapplication, short constructionapplication period, etc. Specification Data Solvent: Water Pigment: Non-lead pigment Theoretical Solids By Volume: more than 50% Theoretical Coverage: Theoretically 1 litre of this product covers 12 sqm in 1 coat Coverage varies considerably depending on application methods and surface roughness and porosity. Shelf Life: Minimum 12 months at 77F(25C) unopened and store in cool and dry places. Recommended Film Thickness: Wet: 80 micron Dry: 30 micron Dry Time: At 77F (25C) and 50% R.H. to recoat Touch Dry: 1 hours Recoat : 2-3 hours Application: Brush, Roll, conventional spray or Airless Spray. Thinner: Thin up 15% depend on different application methods & temperature. Do not over thin by adding more than 30% water. Brush or Roller: For sealing new or bare surfaces thin with up to 1 part of clean water to 5-10 parts of paint(10%-20%) Conventional Spray: Add up to 1 part clean water to 5 parts paint(20%) Airless spray: do not thin Clean-up: Clean up equipment with water Typical painting system Substrate System All kinds of Wall surfaces 1.Alkali Resistance Primer (1 coat) 2.Emulsion Wall Paint (2 coats)

Supplier: Plastic scrap (ldpe, pp, pvc, pet, pmma, hdpe, bopp, pe, ps, abs etc)., textile waste (cotton hosiery clips, cotton thread waste), denim, unbleached, selvedges rama string, rags for mattresses, wiping rags, licekrin dropings 100% cotton bales, card fly etc.) paper scrap

Supplier: Chemical, chemical raw material, auxiliaries, solvents, paint, coating, rubber, plastic, plasticizer, surfactant, additives, steel pipe, steel tube, stainless steel tube, stainless steel pipe, pipe fitting, flange, fasteners, steel wire, steel accessories
Services: Transportation agent,customs clearance service,
Buyer: Import chemical raw materials, auxiliaries, bulk commodities

Supplier: Cast iron skulls, cast iron borings and turnings, steels skulls, eaf skulls, plate iron, mill scale, metal scrap, incinerated scrap (e46)