PRODUCT RANGE
1) SU-EPO-PRIME-10 : Two pack Epoxy-polyamide Zinc phosphate Red oxide Primer, direct application on ferrous metals.
2) SU-EPO-PRIME-20: Two pack Epoxy-polyamide Zinc chromate yellow primer, universally recommended for direct application on Ferrous as well as non ferrous metals like Aluminum, galvanized, stainless steel, zinc alloy, casting etc.
3) SU-EPO-PRIME-30 (H.B.) : This is high solid two pack epoxy-polyamide Zinc phosphate Grey primer, recommended for direct application on Ferrous metals.
4) SU-EPO-PRIME-40: Two pack epoxy-polyamide clear primer, recommended for direct application on concrete & wood substrates.
5) SU-EPO-ZR-PRIME-50: Two pack epoxy-polyamide Zinc rich Epoxy primer, recommended for direct application on steel surface prepared by abrasive blast cleaning.
6) SU-THANE-PRIME-60 : Two pack Polyurethane Grey primer, recommended to plastic substrates like FRP, ABS etc.
7) SU-THANE-SRF-70 : Two pack Polyurethane Grey Surfacer. This is an intermediate coat for preparing smooth surface for Polyurethane top coats, recommended for application on Ferrous metals & FRP substrates after Epoxy or Polyurethane primer coat. This product can be overcoated with our polyurethane top coats
8) SU-PP-PRIME-80 : Single pack excellent adhesion promoter primer for Polypropylene (PP) surface. It gives excellent intercoat adhesion when top coated with Polyurethane paint. Provides very good water resistance, petrol resistance etc.
9) SU-PRIME-SP-90 : Single pack zinc phosphate, Quick Drying primer.
10) SU-TOP-SP-94 : Single pack Alkyd base special polymer Quick drying finish paints for High
Performance. Excellent combination of mechanical & chemical resistance properties.
11) SU-EH-PRIME-92 : Single pack PVB primer, This product is universally recommended for direct application on Ferrous as well as non-ferrous substrate, after proper surface preparation. It provides excellent adhesion on these metals and provides very good formulation for subsequent top coat. This primer coat can be overcoated with alkyds, Chlorinated rubber paint , epoxy and polyurethane top coats.
12) SU-GUARD-TOP-100 : Two pack Epoxy-polyamide, cold cured finish coat. It possesses excellent abrasion resistance, very good adhesion, flexibility and chemical resistance etc.
13) SU-GUARD-CT-131 : Two pack Epoxy polyamide based self priming, high build Coal Tar coating system for high performance. This product is universally recommended to marine project structures, tanks, pipelines & process industries
14) SU-GUARD-MIO-133 : Two pack Polyamide cured Epoxy based Micaceous Iron Oxide pigmented Intermediate Coat. Suitable for protection of steel structure in aggressive coastal and industrial atmosphere.
15) SU-EPO-UNICOAT-150 : Two pack Epoxy cold-cured polyamide self-priming paint system, functions as a primer cum topcoat. This product is recommended for direct application on ferrous metals only.
1) SU-GUARD-TOP-100 : Two pack Epoxy-polyamide, cold cured finish coat. It possesses excellent abrasion resistance, very good adhesion, flexibility and chemical resistance etc. 2) SU-GUARD-CT-131 : Two pack Epoxy polyamide based self priming, high build Coal Tar coating system for high performance. This product is universally recommended to marine project structures, tanks, pipelines & process industries 3 SU-GUARD-MIO-133 : Two pack Polyamide cured Epoxy based Micaceous Iron Oxide pigmented Intermediate Coat. Suitable for protection of steel structure in aggressive coastal and industrial atmosphere. 4) SU-EPO-UNICOAT-150 : Two pack Epoxy cold-cured polyamide self-priming paint system, functions as a primer cum topcoat. This product is recommended for direct application on ferrous metals only. 5) SU-THANE 200: is a two pack Aromatic Acrylic Polyurethane finish coat. It possesses excellent combination of mechanical and chemical resistance properties, corrosion resistance, alkali resistance, solvent & water resistance. Universally recommended for various industrial applications, hygienic wall coatings in pharmaceutical industry, hospitals, cold rooms and computer, battery rooms, etc. for wood furniture industry for OEM industry etc.
Specifications 1.odorless 2.low VOC 3.antimicrobial 4. mildew resistant 5.environmentally friendly 6.waterproof 7.Scrub resistance Description It is an enhanced mildew proof product adopting nano-scale Ag+ antimicrobial and mildew proof technology, integrating odorless formula, with fresh product smell, smooth paint film, durable and beautiful paint.As an affordable and environmentally friendly product with excellent decorative performance, it is characterized by fresh smell, environmental health, strong covering power, large painting area, convenient constructionapplication, short constructionapplication period, etc. Specification Data Solvent: Water Pigment: Non-lead pigment Theoretical Solids By Volume: more than 50% Theoretical Coverage: Theoretically 1 litre of this product covers 12 sqm in 1 coat Coverage varies considerably depending on application methods and surface roughness and porosity. Shelf Life: Minimum 12 months at 77F(25C) unopened and store in cool and dry places. Recommended Film Thickness: Wet: 80 micron Dry: 30 micron Dry Time: At 77F (25C) and 50% R.H. to recoat Touch Dry: 1 hours Recoat : 2-3 hours Application: Brush, Roll, conventional spray or Airless Spray. Thinner: Thin up 15% depend on different application methods & temperature. Do not over thin by adding more than 30% water. Brush or Roller: For sealing new or bare surfaces thin with up to 1 part of clean water to 5-10 parts of paint(10%-20%) Conventional Spray: Add up to 1 part clean water to 5 parts paint(20%) Airless spray: do not thin Clean-up: Clean up equipment with water Typical painting system Substrate System All kinds of Wall surfaces 1.Alkali Resistance Primer (1 coat) 2.Emulsion Wall Paint (2 coats)
Supplier: Led bulb, tube light, panel light, decoration light, wall light, steel wires, steel plate, stainless steel plate, twisted wire rods, galvanized wires, wire mesh, site fencing, mosquito mesh, thread rods, rebar, twisted rods, t bar, nuts and bolts, hardware, pvc pipes, upvc pipes, api pipes, melamine, mdf board, plywood, film faced, shuttering, packing, core veneer, face veneer, hdf molded door skin, door filler, tubular particle boards, pvc boards, wpc boards, doors, block board, hard board, gypsum board, canopy, carpet, flooring wooden, bamboo, laminated engineering, tiles, granite tiles, granite blocks, black galaxy, wash basin, water closets, washbasins, ss sinks, faucets, furniture, pvc edge bending, crew, locks, pvc seals, silicone cartridges, shower enclosures, shower door hinges, handles, knobs, brackets, slides, nails, solar panels, flexible solar panels, solar power station, battery, inverters, rechargeable fans, lights, spring, 3ply disposable face mask, oxygen concentrator ,
Services: Buying office, oem, components sourcing, value added services
Buyer: In shell pecan nut, macadamia nut
- Material : Solid SS304, SS316, SS316L ( also available in some models with hollow tube) - Shape at top of the spigot: Round/dome top or slopped as shown in the picture) - Also available in Square shape - Spigot no hole in the glass panel. - Spigot with base plate and cover ring - Dimensions: 48 x 155mm, 48*220mm, 48*300mm with base plate. - include the black gasket and stainless steel insert - Mirror polished or satin stainless steel.
1.We use imported base paper from Germany. For solid color, base paper most 80 to 120GSM. For wood base paper is between 70-85 gsm 2. High quality water-base ink- Available over 200 shades in Solid colors and wood grains 3. With clear texture ,high Fidelity meeting international standards. 4. With smooth surface coating 5. Germproof, mould proof, antistatic and wear-resistance. 6. Green environmental protection and Odorlessness which Conforms to the GB18584-2001 standard requirement 7. Can be used for the hot press molding craft, the production efficiency is high. 8. Melamine paper takes shape easily, is widely used for the panel furniture and the decorative yarn. Product Specification: Width: 1230-1260mm or 1300-1800mm Length: 500-1000m For storing: Put it in room to a cool and dry place keep the temperature 20-25°C in room. The best humidity is: 50-60% We can also give you complete decorative solution with Matching Melamine Edge Banding, PU Paper. If you need just need Melamine/prelaminated boards either in MDF / Particle board we can also do so
Base material:solid brass, ss304, ss316 Finish:chrome, satin nickel, pearl satin,pss-polished ss, sss- satin stainless steel, pvd, gold, brass polished For use on: tempered glass thickness 6mm to 12mm glass Edges:straight egdes/beveled edges Recommended glass door weight for three hinges:heavy duty hinges: 3 hinges- 54kgs Recommended glass door weight for two hinges: heavy duty hinges: 2 hinges- 34kgs Glass cuts: square glass cut, ear mouse glass cut, round glass cut Glass door swing:90,135, 180 degree, full swing.
Material: hdf Density:+950kg/m3 Door skin width: 660/740/840/920/1020mm Height: 2150mm Surface: natural wood veneer, melamine, enamel paint or plain door skin. We supply hdf moulded door skins, door panels, many designs to choose, with natural wood veneer, melamine finish, painted, with grains. Thickness 3.0 to 4.5mm, width of panel upto 1020. In natural wood veneer : sapele, mahogany, teak, golden teak, walnut. Wenge, black walnut, rosewood, oak, chinese oak, red white oak. Cherry, makore. Many of these veneers can be supplied with engineered veneered surface