NEOSHIELD PU Paints are 2 part polyurethane based top coat offering good resistance to chemical, UV. These products are designed to offer best gloss retention. The product has got excellent adhesion strength and also offers a balanced aesthetic and corrosion protection. NEOSHIELD PU Paints are available in Clear / High Glossy / Semi Glossy varieties. Special products with non yellowing fetaures are also available. These products cure at Room temperature and provides excellent flexibility, toughness, good abrasion, chemical & UV resistance
Turnkey dustless automatic plastic painting line:
1.Plastic spray painting line
2.Plastic painting line
3.Automatic painting line
4.Plastic painting line
5.Dustless painting line
5. Plc control panel
6 .Air handling unit for fresh air to oven, spray booth, dedusting booth and complete paint shop area.
7. Thermal coat / sandwich panel for the plant
8. 1.2mm-1.5mm-2.0mm ss sheet
9. Used for various plastic parts, automobile parts, injection moulded plastic parts
Two-component Air Drying Acrylic Aliphatic, Non Yellowing polyurethane finish coating.
Recommended Use :-
This product has excellent weathering resistance additionally it offers excellent resistance to various industrial chemical fumes and splash. This product is recommended as topcoat with suitable primers and undercoats for use in High Chemical & Saline atmosphere for better aesthetics and corrosion resistance in Chemical, Fertilizers, Petrochemical, industrial plants and also for premium industrial equipments. Not recommended for immersion application.
Physical Data
COLOUR : Industrial Shades
FINISH : Glossy / Semi-glossy
SOLIDS BY VOLUME : 40 + 3% (Depends on shade)
THEORETICAL SPREADING RATE : 13.33 sq.mt / ltr @ recommended DFT of 30
FLASH POINT : Base : Above 23 C Hardener : Above 23C
DRYING CHARACTERISTICS (At 300 C & 65% Relative Humidity) : SURFACE DRY : 30 minutes max HARD DRY : Overnight FULL CURE : 7 Days
SHELF LIFE : BASE : 6 months HARDENER : 6 months
Surface Preparation
This being a topcoat, which is applied over, primer or intermediate coats, the surface should be free from oil, moisture, dust and dirt. Aged epoxy / PU coating should be roughened by emery paper grade 400 / 600 for better bonding.
Application Data :-
MIXING RATIO : Base: Hardener - As per our recommendations
APPLICATION : By Brush / By Conventional Spray / By Airless Spray
THINNER : Type 290
POT LIFE : 4 hours min at 30C
RECOMMENDED DFT : 30- 40 .
OVERCOATING INTERVAL : MIN : 8 hours MAX : 24 hours
COMPATIBILITY : Can be applied over Epoxy and Polyurethane primers, intermediate coats and topcoats.
Commercial grade two components Polyurethane Topcoat, formulated with solid content combined with fast drying, good transparency, flow, and leveling characteristics, provides the excellent equalization of the matt effect. Combined with the high mechanical resistant and soft
slippery touch that enhances the overall beauty and feasibility of the finishing product.
USES
For interior use on all furnishings as wardrobes, closet, paneling, doors, windows, frame, and
casting, etc. The overall characteristics such as extensibility, Matt effect equalization, transparency and resistance to polishing have been developed to the maximum which in turn enables the product to have almost unlimited possibilities in the furniture industry.
