SU-EPO-PRIME 10: is a two pack polyamide-cured epoxy primer containing Zinc Chrome as a corrosion inhibiting pigment. Primer is designed to give outstanding corrosion resistance and adhesion. It cures to a hard and tough film with excellent physical and mechanical properties. This product is universally recommended for direct application on Ferrous metals, suitably treated light alloys or galvanized surfaces, after proper surface preparation. Primer can be overcoated with epoxy and polyurethane intermediate coats and top coats. Two pack Epoxy-polyamide Zinc Phosphate Red Oxide Primer, direct application on ferrous metals.
2) SU-EPO-PRIME 20: is a two component Epoxy cold cured Zinc Chromate Primer with outstanding corrosion resistance and adhesion. Primer cures to a hard and tough film with excellent physical and mechanical properties. This product is universally recommended for direct application on Ferrous metals, suitably treated light alloys or galvanized surfaces, after proper surface preparation. Primer can be overcoated with our epoxy and polyurethane intermediate coats and top coats.
3) SU-EPO-PRIME 30: is a two component Epoxy cold cured Zinc Phosphate primer with outstanding corrosion resistance and adhesion. Primer cures to a hard and tough film with excellent physical and mechanical properties. This product is universally recommended for direct application on Ferrous metals, suitably treated light alloys or galvanized surfaces, after proper surface preparation. Primer can be overcoated with our epoxy and polyurethane intermediate coats and top coats.
4) SU-EPO-PRIME 31: is a two pack Epoxy cold cured Zinc Phosphate primer with high film build outstanding adhesion and corrosion resistance. Primer cures to a hard and tough film with excellent physical and mechanical properties. It is ideal for application in areas where higher thickness is recommended for achieving optimum performance. This product is universally recommended for direct application on mild steel or suitably treated light alloys or galvanized surface, after proper surface preparation.
5) SU-EPO-PRIME 32: is a two pack high solids polyamide cured epoxy resin surface tolerant primer with outstanding corrosion resistance. Primer contains good amount of anticorrosive pigment. It is ideal for application in areas where higher thickness is required for achieving optimum performance. The primer can be over coated with epoxy, chlorinated rubber or polyurethane topcoats. Primer has good adhesion to steel, galvanized steel and non ferrous metals.
6) SU-EPO-PRIME 40: is a two pack epoxy polyamide clear primer, recommended for direct application on concrete & wood substrates.
PRODUCT RANGE
1) SU-EPO-PRIME-10 : Two pack Epoxy-polyamide Zinc phosphate Red oxide Primer, direct application on ferrous metals.
2) SU-EPO-PRIME-20: Two pack Epoxy-polyamide Zinc chromate yellow primer, universally recommended for direct application on Ferrous as well as non ferrous metals like Aluminum, galvanized, stainless steel, zinc alloy, casting etc.
3) SU-EPO-PRIME-30 (H.B.) : This is high solid two pack epoxy-polyamide Zinc phosphate Grey primer, recommended for direct application on Ferrous metals.
4) SU-EPO-PRIME-40: Two pack epoxy-polyamide clear primer, recommended for direct application on concrete & wood substrates.
5) SU-EPO-ZR-PRIME-50: Two pack epoxy-polyamide Zinc rich Epoxy primer, recommended for direct application on steel surface prepared by abrasive blast cleaning.
6) SU-THANE-PRIME-60 : Two pack Polyurethane Grey primer, recommended to plastic substrates like FRP, ABS etc.
7) SU-THANE-SRF-70 : Two pack Polyurethane Grey Surfacer. This is an intermediate coat for preparing smooth surface for Polyurethane top coats, recommended for application on Ferrous metals & FRP substrates after Epoxy or Polyurethane primer coat. This product can be overcoated with our polyurethane top coats
8) SU-PP-PRIME-80 : Single pack excellent adhesion promoter primer for Polypropylene (PP) surface. It gives excellent intercoat adhesion when top coated with Polyurethane paint. Provides very good water resistance, petrol resistance etc.
9) SU-PRIME-SP-90 : Single pack zinc phosphate, Quick Drying primer.
10) SU-TOP-SP-94 : Single pack Alkyd base special polymer Quick drying finish paints for High
Performance. Excellent combination of mechanical & chemical resistance properties.
11) SU-EH-PRIME-92 : Single pack PVB primer, This product is universally recommended for direct application on Ferrous as well as non-ferrous substrate, after proper surface preparation. It provides excellent adhesion on these metals and provides very good formulation for subsequent top coat. This primer coat can be overcoated with alkyds, Chlorinated rubber paint , epoxy and polyurethane top coats.
12) SU-GUARD-TOP-100 : Two pack Epoxy-polyamide, cold cured finish coat. It possesses excellent abrasion resistance, very good adhesion, flexibility and chemical resistance etc.
13) SU-GUARD-CT-131 : Two pack Epoxy polyamide based self priming, high build Coal Tar coating system for high performance. This product is universally recommended to marine project structures, tanks, pipelines & process industries
14) SU-GUARD-MIO-133 : Two pack Polyamide cured Epoxy based Micaceous Iron Oxide pigmented Intermediate Coat. Suitable for protection of steel structure in aggressive coastal and industrial atmosphere.
15) SU-EPO-UNICOAT-150 : Two pack Epoxy cold-cured polyamide self-priming paint system, functions as a primer cum topcoat. This product is recommended for direct application on ferrous metals only.
1) SU-GUARD-TOP-100 : Two pack Epoxy-polyamide, cold cured finish coat. It possesses excellent abrasion resistance, very good adhesion, flexibility and chemical resistance etc.
2) SU-GUARD-CT-131 : Two pack Epoxy polyamide based self priming, high build Coal Tar coating system for high performance. This product is universally recommended to marine project structures, tanks, pipelines & process industries
3 SU-GUARD-MIO-133 : Two pack Polyamide cured Epoxy based Micaceous Iron Oxide pigmented Intermediate Coat. Suitable for protection of steel structure in aggressive coastal and industrial atmosphere.
4) SU-EPO-UNICOAT-150 : Two pack Epoxy cold-cured polyamide self-priming paint system, functions as a primer cum topcoat. This product is recommended for direct application on ferrous metals only.
5) SU-THANE 200: is a two pack Aromatic Acrylic Polyurethane finish coat. It possesses excellent combination of mechanical and chemical resistance properties, corrosion resistance, alkali resistance, solvent & water resistance. Universally recommended for various industrial applications, hygienic wall coatings in pharmaceutical industry, hospitals, cold rooms and computer, battery rooms, etc. for wood furniture industry for OEM industry etc.
