Welding rotator (turning roll, roller bed):
-Composed of driving/power unit, idler unit, electric cabinet and manually controlled panel.
-Manual controlled panel with buttons makes operation much convenient.
-Distance between rollers can be adjusted automatically to fit pipes/tanks with different diameters.
-Frequency speed control is applied for the adjustment of roller speed.
-Two steel rollers are used at both ends of rubber rollers to protect rubber rollers.
-Rollers material could also be polyurethane or steel.
-Widened rollers increase life span of rollers and reducer pressure on pipes/tanks.
Clear packing.
-The worktable could be rotated ( in 360¡ã)or tilted (in 90-120¡ã)allowing work piece to be welded at the best position.
-Variable Frequency control (VFD) speed by rotating and motor-driven speed regulation by tilting from which customers can choose in line with operational requirements.
-Electric control system composed of electric cabinet and manual control panel making it easy to operate.
-Equipped with slewing bearing which helps increase the loading capacity and makes the rotation smooth.
- Worktable is manufactured with six M30T bolt grooves used to clamp and position the work pieces.
-Several concentric grooves are processed onto the surface of the worktable to help position the work piece at the center.
-The whole rack will not deform even long time use because of annealing treatment.
ZHB-50:
Max Loading Capacity:5T
Power source: 380V 3 phases 50Hz
Rotating Speed: 0.05£0.5rpm
Rotating Angle:360¡ã
Tilting Speed: 0.2
Tilting Angle: 120¡ãrpm
Diameter of Table:¦µ1500mm
Output: rotate: 1.5kw
Tilt: 3 kw
Rotating Speed Adjust:VFD
Max Gravity: 300mm
Max Eccentricity:200mm.
clear packing.
Features
1. The column and boom are manufactured with cold-formed welded type structure. After the annealing process and finish machining, they possess fine rigidity and strength.
2. To ensure safety, the boom lifting device uses a ratchet-and-pawl structure and is equipped with a fall protection device.
3. Frequency control is applied for the adjustment of retracing speed, greatly improving the reliability and stability of the fixed welding manipulator.
4. The front end of the boom is manufactured with a cross adjustment structure which can be adjusted through the manual control box.
5. The eight guide wheels all utilize eccentric structure. During installation and set up, the lead rail tension can be adjusted by using the eccentric shaft. After this adjustment, the rail should be locked with double nuts. Fixed welding manipulator (column boom manipulator)
6. The column rotation can be carried out with manual and electric control then locked.
7. The electrical equipment of the fixed welding manipulator includes a manual control box and electric cabinet.
8. Trolley, manned seat and worktable, drag chain, seam tracing and monitoring system, and flux recovering system are optional.
Clear packing.
Material: st52, e355, a106b, c20, ck45
Id tolerance :h8
Bks or sr condition
In bundle, with plastic caps, oiled
Material: St52, E355, A106B, CK45
H8 tolerance, BKS condition. Ra0.2-0.4
in bundle, with caps, oiled
material: St52, E355, A106B, CK45
H8 tolerance, BKS condition. Ra0.2-0.4
in bundle, with caps, oiled
