Summarize
The NE100 Optical transmission platform can be as a converge center of optical transmission system in headend and hub to increase network reliability, scalability and cost-effective deployments. NE100 provide high usable module density (up to 14 modules in 4RU chassis), smart management in local or through SNMP, simplified installation, optional redundant powering, hot-swappable modules.
Features
Convenient: Blind-mate RF adaptors on the back-plane. Simple insertionand removal of modules; vacuum fluorescent display and navigation buttons for use as a simple interface for local status monitoring and control
High Density: Capable of accommodating up to 14 application modules in a 4RU chassis
Universal: Application modules can be located in any slot.
Hot-swappable Modules: All application modules are hot-swappable modules, time-delay and protection circuit inside
Intelligence: CPU intelligent system controller, monitoring the output voltage of power module and the system temperature; Blue-Screen VFD display the work status of the system; Element Management interface and independent TCP/IP server, ease to manage remotely
High Reliability: two additional slots in the rear accommodate the AC and/or DC power supplies (120/240 Vac or -48 Vdc). One is main power supply, another is redundant, heat switched automatically
Configurations
Chassis
Model
Descriptions
NE100-H
Housing (only),no power
NE100-H1
Housing, 1 NE100-PSAC
NE100-H2
Housing, 2 NE100-PSAC
NE100-H3
Housing, 1 NE100-PSDC
NE100-H4
Housing, 2 NE100-PSDC
Powering Modules
Model
Descriptions
NE100-PSAC
AC Power Supply 180~264V,50/60Hz
NE100-PSDC
DC Power Supply,-48v
Application Modules
Module
Descriptions
TFT100-(output power,mw)
Forward 1310nm Optical Transmitter 4~20mw
TFR100
Forward optical receiver
TRR100
Single Reverse Optical Receiver
TRR120
Dual Reverse Optical Receiver
TRT100F
Reverse Optical Transmitter,FP
TRT100D
Reverse Optical Transmitter,DFB
TRT100C
Reverse Optical Transmitter,CWDM
NE100-H Chassis
Technical Specifications
Items
Specifications
Dimensions(Hí-Wí-D) mm
177í-437í-550
Slots
14
Power supply
AC,180~264v 50/60 Hz, or DC,-48V
RF Connectors
F-Type
Weight kg
20
Ordering Information:
Model Number
Descriptions
NE100-H
Chassis (only),no power
NE100-PSAC
AC Power Supply 180~264V,50/60Hz
NE100-PSDC
DC Power Supply,-48v
NE100-H1
Chassis, 1 NE100-PSAC
NE100-H2
Chassis, 2 NE100-PSAC
NE100-H3
Chassis, 1 NE100-PSDC
NE100-H4
Chassis, 2 NE100-PSDC
PS100 AC & DC Power Supplies
Summarize
The PSAC and PSDC are power supply modules that provide AC and DC voltages for the NE100 optical broadband transmission platform, the module is installed in the rear of the Housing accommodates two power supplies for true power source redundancy. When two power supplies are used, the load is shared between both supplies. If one supply fails, the other immediately picks up the additional load.
Features
1. High reliability.
2. Low output voltage
3. Dual power supply hot-switched
Specifications
Input Voltage
180-270V 50HZ AC
40-72VDC
DC Output
+24.4V7A
+5.4V 8A
-5.4V 8A
Efficiency
>85%
Note: PSDC-48V, -48V DC Power Supply.
10KG
Summarize
The NE100 Optical transmission platform can be as a converge center of optical transmission system in headend and hub to increase network reliability, scalability and cost-effective deployments. NE100 provide high usable module density (up to 14 modules in 4RU chassis), smart management in local or through SNMP, simplified installation, optional redundant powering, hot-swappable modules.
Features
Convenient: Blind-mate RF adaptors on the back-plane. Simple insertionand removal of modules; vacuum fluorescent display and navigation buttons for use as a simple interface for local status monitoring and control
High Density: Capable of accommodating up to 14 application modules in a 4RU chassis
Universal: Application modules can be located in any slot.
Hot-swappable Modules: All application modules are hot-swappable modules, time-delay and protection circuit inside
Intelligence: CPU intelligent system controller, monitoring the output voltage of power module and the system temperature; Blue-Screen VFD display the work status of the system; Element Management interface and independent TCP/IP server, ease to manage remotely
High Reliability: two additional slots in the rear accommodate the AC and/or DC power supplies (120/240 Vac or -48 Vdc). One is main power supply, another is redundant, heat switched automatically
Configurations
Chassis
Model
Descriptions
NE100-H
Housing (only),no power
NE100-H1
Housing, 1 NE100-PSAC
NE100-H2
Housing, 2 NE100-PSAC
NE100-H3
Housing, 1 NE100-PSDC
NE100-H4
Housing, 2 NE100-PSDC
Powering Modules
Model
Descriptions
NE100-PSAC
AC Power Supply 180~264V,50/60Hz
NE100-PSDC
DC Power Supply,-48v
Application Modules
Module
Descriptions
TFT100-(output power,mw)
Forward 1310nm Optical Transmitter 4~20mw
TFR100
Forward optical receiver
TRR100
Single Reverse Optical Receiver
TRR120
Dual Reverse Optical Receiver
TRT100F
Reverse Optical Transmitter,FP
TRT100D
Reverse Optical Transmitter,DFB
TRT100C
Reverse Optical Transmitter,CWDM
NE100-H Chassis
Technical Specifications
Items
Specifications
Dimensions(Hí-Wí-D) mm
177í-437í-550
Slots
14
Power supply
AC,180~264v 50/60 Hz, or DC,-48V
RF Connectors
F-Type
Weight kg
20
Ordering Information:
Model Number
Descriptions
NE100-H
Chassis (only),no power
NE100-PSAC
AC Power Supply 180~264V,50/60Hz
NE100-PSDC
DC Power Supply,-48v
NE100-H1
Chassis, 1 NE100-PSAC
NE100-H2
Chassis, 2 NE100-PSAC
NE100-H3
Chassis, 1 NE100-PSDC
NE100-H4
Chassis, 2 NE100-PSDC
PS100 AC & DC Power Supplies
Summarize
The PSAC and PSDC are power supply modules that provide AC and DC voltages for the NE100 optical broadband transmission platform, the module is installed in the rear of the Housing accommodates two power supplies for true power source redundancy. When two power supplies are used, the load is shared between both supplies. If one supply fails, the other immediately picks up the additional load.
Features
1. High reliability.
2. Low output voltage
3. Dual power supply hot-switched
Specifications
Input Voltage
180-270V 50HZ AC
40-72VDC
DC Output
+24.4V7A
+5.4V 8A
-5.4V 8A
Efficiency
>85%
Note: PSDC-48V, -48V DC Power Supply.
10KG
Features:
1) High quality, high linearity DFB laser
2) Advanced pre-distortion function
3) 1U, 19 inch standard chassis, 220VAC, 50Hz switching power supply or others.
4) 750 or 862 MHz bandwidth, supporting most broadband transport applications.
5) Unique thermal design provides superior heat dissipation, increasing the reliability of your system.
6) Automatic gain control helps maintain constant RF drive level to laser for consistent performance.
7) An interface LCD display allows you to monitor the transmitters performance. In addition, RS232 helps you monitor your transmitter performance in a long-distance
Specifications
Item
Unit
Specification
Bandwidth
MHz
47-750 or 860
Optical Wavelength
nm
1310 (í+ 20)
Optical Output Power (í+ 0.25 dB)
(4~20mW) all series
Safety Power Shutdown
Yes
Input RF Power, Main (í+ 0.1 dB)
dBµV
72.0(+3/-2)
Isolation, Auxiliary to Main Input
dBc
-32
AGC Input Range
dB
í+ 3
Response Flatness (maximum)
dB
í+ 0.75
Response Slope
dB
0 to 0.75
Input Impedance
ª+
75
Input Return Loss
dB
>14
RF Test Point (í+ 1.0 dB)
dB
-20
Carrier-to-Noise Ratio (CNR)
dB
>51.0
Composite Second Order (CSO)
dBc
í_60
Composite Triple Beat (CTB)
dBc
í_65
Powering
V
AC220í+10%
Power Consumption (maximum)
W
40
Mechanical Specifications
Optical Connector
FC/APC, or SC/APC
RF Connector
F-Type
Dimensions (height í- width í- depth)
cm
4.3í-48.5í-30.0
Environmental Specifications
Ambient Temperature
-25+65
Operating Temperature Range
0-50
Notes:
Optical link budget that provides a C/N of 51 dB when loaded with 59 PAL-D channels over a 10km single fiber.
Composite Triple Beat (CTB) is 65dBc typical (all models)
Composite Second Order (CSO) is -60dBc typical (all models)
Specifications are subject to change without notice.
6KG
1. Excellent photodiod
2. 1310nm and 1550nm two mode receiver
3. 862MHZ bandwidth,Bi-directional transmission
4. High reliability
5. GaAs amplifier module,4 high level output ports, low distortion
6. Excellent switching power supply
7. Return path optical transmitter: FP , DFB , CWDM available
Specifications:
Forward path
Item
Unit
Specification
Remark
Optical
Optical Wavelength
nm
1310 or1550
Optical Input Power
dBm
+1.5 -5
Optical Connector
FC/APC or SC/APC
Optical Link
Frequency Response
dB
í+1.5
Output level
dBµV
>104
Optical input power -1 dBm
Return Loss at Output
dB
í¦16dBí_550MHz
í¦14dB550-860MHz
C/N
dB
í¦51
1) Connected with TOT13 optical transmitter,10KM opticalfiber plus the loss of optical passive,4%OMI.
2) RF output levelí¦104dBuV,optical input power -1dBm.
CSO
dB
í¦60
CTB
dB
í¦65
Reverse Path
Parameter
Unit
Specification
Remark
DFB
FP
RF Input
dBmV
18
18
Optical Output Power
mw
1~4
1
Input Return Loss
dB
<-14
<-14
Flatness
dB
í+1
í+1
5~200MHz
C/N
dB
50
45
1) Four signal method: 19,25,31,37MHz
2.)Two signal method: 13,19MHz
3)Test Condition: standard receiver, 10dB link loss.
CSO
dBc
-51
-45
CTB
dBc
-55
-45
Optical Output Power
mW
1~4
1
Flatness
dB
í+1
í+1
5~200 MHz
Optical Wavelenth
nm
1310
1310
Operation Temperature
-20~+85
-20~+85