Origin from Hubei, China
Category other
The material is alumunium
Device size 1450x550x900mm
Linkage
Product name Rail welding joint grinding machine
- Color using a rail welding joint grinder
Apply a rail copying sander
Standard China Railway Construction
Quality control iso
Certificate CE
Warranty 1YEAR
Origin from Hubei, China
Type rail clamp
Material steel, alloy steel
Equipment size 20*10 * 15 cm cm
Linkage
Type: Railway fasteners
Product name: Railway clip
How to use: railway tools
Color: Custom
Application: Railway track fasteners
Approved: ISO
Certificate CE
Warranty: 1 year
Standard: China Railway Construction Corporation
Origin from Hubei, China
Type rail clamp
Material Stainless steel
Equipment size 335 mm * 175 mm * 42 mm
Linkage
Model LJ-JJQ-C
Application track type 43, 50, 60 kg
LJ-LDG1901 Electric Rail Drilling Machine
36V Intelligent lithium battery rail drilling machine
*Fully waterproof design, support rainy day work
*Clean energy, green and pollution-free
*Intelligent control system, keeps drilling at a constant speed, and displays the number of holes with remaining power
*Super endurance capability : Drilling more than 40 holes each charge (31 mm diameter hole)
Drilling more than 110 holes each charge (13.5 mm diameter hole)
Drilling more than 180 holes each charge (9.8 mm diameter hole)
*Ultra-light weight, only 15.9 kg including battery
*Overload reminder and protection design
*Quick-change design of the drill bit, do not need any additional tools
LJ-LDG1901 Electric Rail Drilling Machine
36V Intelligent lithium battery rail drilling machine
*Fully waterproof design, support rainy day work
*Clean energy, green and pollution-free
*Intelligent control system, keeps drilling at a constant speed, and displays the number of holes with remaining power
*Super endurance capability : Drilling more than 40 holes each charge (31 mm diameter hole)
Drilling more than 110 holes each charge (13.5 mm diameter hole)
Drilling more than 180 holes each charge (9.8 mm diameter hole)
*Ultra-light weight, only 15.9 kg including battery
*Overload reminder and protection design
*Quick-change design of the drill bit, do not need any additional tools
The internal combustion rail drilling machine is an essential tool for line maintenance, construction and emergency repair operations in railway works and engineering departments. It adopts a hollow drill bit and a screw nut tightening mechanism with a quick-opening function. Easy to operate and safe to use.
The machine is also equipped with an automatic water supply and cooling device for the drill bit. When the drilling starts, the cooling water is automatically supplied, and after the drilling is completed, it stops automatically.
Gasoline engine power 1.47kW (Mitsubishi) or 1.2kW (Thailand Honda)
Maximum hole diameter 31mm
Spindle revolutions 250~ 285r/min
Drilling time 40S
Dimensions
800 X 340 X 400mm
Net weight of the whole machine 23kg
The internal combustion rail drilling machine is an essential tool for line maintenance, construction and emergency repair operations in railway works and engineering departments. It adopts a hollow drill bit and a screw nut tightening mechanism with a quick-opening function. Easy to operate and safe to use.
The machine is also equipped with an automatic water supply and cooling device for the drill bit. When the drilling starts, the cooling water is automatically supplied, and after the drilling is completed, it stops automatically.
Gasoline engine power 1.47kW (Mitsubishi) or 1.2kW (Thailand Honda)
Maximum hole diameter 31mm
Spindle revolutions 250~ 285r/min
Drilling time 40S
Dimensions
800 X 340 X 400mm
Net weight of the whole machine 23kg
The internal combustion rail drilling machine is suitable for high-power track maintenance machinery working between areas without power supply. The machine uses Japanese internal combustion engine as power
Source, small size, simple operation, easy maintenance, it is the ideal machine for drilling 75kg, 60kg, 50kg, 43kg rail. Local borehole
The machine is suitable for the public works and engineering department to drill the joint hole of the rail and the basic rail of the switch, and is also suitable for the electrical and engineering department to guide the rail
The cable plug hole is drilled. The public works department uses �?31 hollow drill bit, and the electric department uses special twist drill bit. The drilling machine has safe and reliable,
Fast card loading, high drilling accuracy, short time, fast efficiency, light weight, simple operation, flexible and convenient features.
The drilling machine is composed of clamp, shaft sleeve feeding device, working device, reducer, gasoline engine, scale and other parts. Gasoline engine power through
Clutch, reducer, working device, transfer spindle to drive drill bit rotation.
The machine is suitable for tamping operation on various rail and concrete sleeper track after the overhaul and medium ballast cleaning operation, and also suitable for tamping operation on the ballast bed of new track. This machine has the features of high quality performance, reasonable structure, reliable and high working efficiency, which will satisfy the requirement of ballast tamping operation.
Specification
Model
YD-22
Type
Rail Tamping Machine
Material
Stainless Steel
Dimensions (L x W x H) (mm)
1300 * 750 * 1600mm
Engine
Diesel Engine SF190
Power
7kW
Vibrating force
22kN
Vibrating frequency
66.7Hz
Hydraulic system working pressure
5~6MPa
Max insert force
16kN
Max clamping force
6.5kN * 2
Production efficiency
270 pieces / (group hour)
Inserting depth
110mm ± 10mm (underneath the sleeper)
Weight
439kg
YCD-2 hydraulic tumout tamping machine is a special mainenance mechanical equipment for railway turmouts. it is mainly used for tamping the seeper bllast in the tumout section, and can also take into account the tamping efect of the main track bed ballast.
Specification
Model
YCD-2
Type
Rail Tamping Machine
Material
Stainless Steel
Dimensions (L x W x H) (mm)
1420*660*1380mm
Engine
HONDA GX390 petrol engine
Power
6.6 kW
Vibrating frequency
60~70 Hz
Exciting force
34kN
Clamping force
9.4 kN
Insertion force
2.9 kN
Working pressure
5.0 MPa
Tamping insertion depth:
90~ 120mm under sleepers
Weight
337 kg
Origin from Hubei, China
Type of railway maintenance equipment
Material steel
Device size 1760*900*1500mm
Linkage
Type rail vehicle
Usage Railway track maintenance
Product name Rail elevator
Engine Honda GX390
Power supply 6.6kW
Maximum lifting force 150 kNx2
Maximum lining force 130 kN
Maximum lift stroke 1020 mm
Maximum lining stroke â?¥ 310mm/ time
Warranty 1 year
Origin from Hubei, China
Category other
The material is alumunium
Device size 800mm x 400mm x 250 mm
Linkage
Product name Hydraulic rail tensor
- Color uses the railroad tensor
Apply hydraulic rail tensor
Quality control iso
Warranty 1YEAR
Custom. Yeah
Other names hydraulic rail tensor
Key words railway tensor
Lithium battery powered Rail bolt wrench machine (model: LJ-LDB171X) is composed of host, control system, battery system and rail traveling part. The utility model has the advantages of compact structure, light weight, flexible assembly and disassembly, convenient use and no exhaust emission. It can be transported separately, which is convenient for single person to carry on site. The weight of the separated part is less than 15kg. It is applicable to the laying, maintenance and emergency rescue of railway, and is specialized in various railway bolt operations
Specification
Model
LJ-LDB1701X
Type
Lithium Battery Torque Wrench
Material
Stainless Steel
Dimensions (L x W x H) (mm)
1100*700*450mm
Type
Battery powered rail bolt wrench
Rated voltage
(DCV) 24-48
Max. torque
3000 N.m
Motor speed (RPM)
0-3000 optional
Impact frequency (BPM)
0-5000 optional
Battery pack capacity
(ah) 24-48
Operating temperature range
(-40 ~ 50 â??)
Operating range
m6-m30
Torque control
adjustable and controllable
Weight
22kg
Lithium battery powered Rail bolt wrench machine (model: LJ-LDB171X) is composed of host, control system, battery system and rail traveling part. The utility model has the advantages of compact structure, light weight, flexible assembly and disassembly, convenient use and no exhaust emission. It can be transported separately, which is convenient for single person to carry on site. The weight of the separated part is less than 15kg. It is applicable to the laying, maintenance and emergency rescue of railway, and is specialized in various railway bolt operations
Specification
Model
NGM-4.4II
Type
Rail Profile Grinding Machine
Material
Stainless Steel
Dimensions (L x W x H) (mm)
1480*470*810mm
Engine
Two-stroke petrol engine/4.4KW
Main shaft rpm
4670r/min
Bolt screwing flat grinding wheel
125*65*M20
Grinding head angle of inclination
90 °
Grinding head stroke
45 mm
Total weight
61kg
Basic configuration description of switch laying unit: an internal combustion hydraulic pump station (four types of a tow), with 4 special lifting hydraulic
Cylinder (including rail top clamp, rail bottom hook, etc.), 6 meters long hydraulic hose 8.
Portable Rolling Track Gauge is mainly used for railway track gauge and super-elevation (cant) . It can be used for track inspection and fine adjustment of rail gauge. This product has the advantages of fast measuring speed, stable pushing rod, easy to carry,and night-time and tunnel work,legible even in direct sunlight are supported.It is an ideal measuring tool for track fine-tuning, track construction,inspection and track laying.
Model (1435mm)
GJC-JJG0
Track gauge
1410-1470mm
Superelevation measuring range
-185~+185mm
Display mode
OLED display and hand-held terminal display
Supply Voltage
DC3.4V5.2V (rechargeable battery)
Superelevation division value
0.05mm
Working temperature
-30+55
Insulation performance
1M©
Track gauge division value
0.01mm
Superelevation division value
0.05mm
Track gauge max indication error
0.25mm
Superelevation max indication error
0.3mm
Length
1700mm
Net Weight
Net Weight
The tool is a necessary tool used for the repair of rail disassembly, stress release and rail joint adjustment of ordinary rail segments.
The Battery powered rail cutting machine has passed the strict verification of protection grade, and supports the work in rainy and snowy weather; Professional lithium battery platform for ultra long endurance operation; The equipment can be used normally under extreme conditions such as high cold and high altitude; The lithium battery has passed the safety test conducted by the national authority.
Voltage
72V
Power
5KW
Cutting time
Place of Origin Hubei, China
Type Rail Impact Wrench
Material Stainless Steel
Dimensions (L x W x H) (mm) 1300*510*760mm
Brand Name Linkage
Model NLB-300
Main shaft rpm 780r/min
Max. loosen torque 300 N m
Max. fasten torque 150 N m
Working efficiency 10 pieces/min
Petrol engine GX160
Weight 60kg
Place of Origin Hubei, China
Type Hydraulic Railway Track Jack
Material Stainless Steel
Dimensions (L x W x H) (mm) 310*165*520mm
Brand Name Linkage
Product name Rail Track Jack
Application Hydraulic Railway Track Jack
Quality Control: iso
Place of Origin: Hubei, China
Brand Name: Linkage
Keyword Track Jack
Material Stainless Steel
Place of Origin Hubei, China
Type Hydraulic Railway Track Jack
Material Stainless Steel
Dimensions (L x W x H) (mm) 310*165*520mm
Brand Name Linkage
Product name Rail Track Jack
Application Hydraulic Railway Track Jack
Quality Control: iso
Place of Origin: Hubei, China
Brand Name: Linkage
Keyword Track Jack
Material Stainless Steel
Place of Origin Hubei, China
Type Hydraulic Railway Track Jack
Material Stainless Steel
Dimensions (L x W x H) (mm) 310*165*520mm
Brand Name Linkage
Product name Rail Track Jack
Application Hydraulic Railway Track Jack
Quality Control: iso
Place of Origin: Hubei, China
Brand Name: Linkage
Keyword Track Jack
Material Stainless Steel
The Battery powered rail cutting machine has passed the strict verification of protection grade, and supports the work in rainy and snowy weather; Professional lithium battery platform for ultra long endurance operation; The equipment can be used normally under extreme conditions such as high cold and high altitude; The lithium battery has passed the safety test conducted by the national authority.
Specification
Voltage
72V
Power
5KW
Cutting time
NQG 5.1 Rail Cutting Machine
To furnish the varying desires of our customers, we are immersed in offering a world class consignment of Abrasive Rail Cutter. Abrasive Rail Cutter is suitable for cutting upto 60 Kg. 110 uts Rails. the machine has features of fast cutting speed, high utilization rate of cutting discs, high quality of cutting profile, convenient operation, easy motion and safe use. the machine comprises of petrol driven engine, integrated with a cutting unit fitted with an abrasive disc.
NQG5III Internal combustion rail cutting machine is suitable for cutting rails of 43kg/m75kg/m . The quality of cutting section meets the requirement of railway industrial standards. Its a necessary tool used in railway overhaul, maintenance and rush repairing operation. It has features of fast cutting speed, high utilization rate of thin grinding wheel, high quality of cutting section, easy operation, easy movement, safe use and wide application range etc.
Brake Shoes braking is to place iron brake shoes on one or two rails, and the train rolling wheel slides along the rail after
pressing the brake shoes. The rolling friction between the wheel and rail changes into sliding friction to prevent the wheel from moving forward and play the role of braking.
Inward tilting of rails by 1 in 20. The wheel-set was first assembled by mounting the wheels symmetrically on to the axle at a clear spacing of 1600 mm, in accordance with the specifications. The wheel-set was further mounted on to the rails, aligning the wheels to travel in the forward direction of the rails, as shown in figure 2. The movement of wheels were allowed only in the longitudinal direction of rails, and the movements in the lateral and vertical directions were constricted. The implementation of high speed railways in India are in their early phases and vast studies are being conducted for the effective implementation of the system. Maintaining the traction required for efficient operation of trains at high speeds requires the net minimum frictional coefficient to be maintained at the wheel-rail interface.
*The depth of the feed, the real-time battery power digital display, the operator is clear at a glance
*Dual control system, both electronic feed and mechanical operation feed
*Electronic feed, the feed precision is adjustable, realize the dual purpose of primary grinding and precise grinding
*Preset the warning feed depth for grinding to prevent excessive grinding and cause grinding accidents
*Super endurance capability, can work continuously for 1 hour *The whole machine is waterproof and can be used below minus 30
Specification
Model
LJ-LGF2001
Type
Electric Rail Grinding Machine
Material
Aluminium
Operating speed
4500r/min
Rated power
5Kw (brushless DC motor)
Grinding wheel feed accuracy
0.1 mm
Grinding wheel size
150*55*75x4-M8 mm (outer diameter inner diameter thickness)
Maximum tilt range of the grinding wheel
90 ° in one direction
Operating temperature requirements
-30 to 45
Grinding wheel type
resin thick-walled cup-shaped grinding wheel
Battery pack capacity
21Ah
Rated voltage of battery pack
72V
Weight
70Kg
Profiling function
realize profiling grinding of the outer edge contour of different types of rails
Endurance capability(one charge)
thermit welding grind around 8 welds;
laser welding grind around 10 welds
Grinding wheel feeding mode
Dual control system, which can feed both mechanically and electronically
Electronic feed
It is divided into three gears for key switching and operation.
First gear: fine grinding, unit feed 0.1mm
Second gear: initial grinding, unit feed 0.3m
Third gear: initial grinding, unit feed 0.5mm
YD-22III Smart rail tamping machine unit is a renewal product developed by our factory with new material and new technology. It has collected the tamping experience of users at home and abroad. It can do tamping works not only on the ballasted track of concrete sleeper type II and III in China, but also on various kinds of concrete sleepers and steel sleepers in foreign countries. This machine is suitable for tamping operation of different types of rails and concrete sleeper line after large and medium repair and sieving operations, and also suitable for tamping operation of ballast on newly built track bed. The equipment has superior performance, reasonable structure, safety and reliability, and high working efficiency. It fully meets the needs of railway ballast tamping operation.
Specification
Model
YD-22III
Type
Hydraulic Rail Tamping Machine
Material
Stainless Steel
Dimensions (L x W x H) (mm)
2580*2150*1950mm
Engine
4-Stroke Gasoline engine
Power
9.5kw
RPM
3600r / m
Hydraulic system pressure
5~6MPa
Vibrating frequency
66.7Hz
Exciting force
22KN
Max . insert force
16KN
Clamping force
6.5KN*2
Production efficiency
260 sleepers/ hour
Weight
1385kg
ND-1 portable tamper is a special machine for ballast tamping on railway lines and turmouts. Choose high-vibration, high-power gasoline engine as power, with high output power and stable. performance. The air compression hammer impact pick is used to impact the ballat. The impact force is large and the tamping effect is good. The whole machin is smal in size, ight. in. weight, and convenient. to go up and down, which can ffectively guarantee driving safety during operation.
Specification
Model
ND-1
Type
Rail Tamper
Material
Stainless Steel
Dimensions (L x W x H) (mm)
840*470*350 mm
Engine
Two- stroke petrol engine,1.6kW
Rated RPM
4400 r.p.m
Impact energy
30~40 J
Impact frequency
22 Hz
Fuel tank volume
0.95 L
Weight
25 kg
This machine is an indispensable tool for railway maintenance, construction and emergency repair operations. It uses a hollow drill bit, fast clamping, accurate positioning, fast drilling, simple operation and safety use.The rail clamping device has self-locking function, and high drilling precision. The hollow drill bit is used, and special twist drills below 13.5 can also be clamped according to needs. It has automatic water supply function when drilling, and is suitable for maintenance, emergency repair and overhaul operations in public works departments.
Item
Petrol Engine Rail Drilling Machine
Dimensions (L x W x H) (mm)
650*230*250mm
Place of Origin
China
Model
NZG-31Internal Combustion Steel Rail Drilling Machine
Internal Combustion Engine
Honda Gasoline Engine GX35
Rotate Speed without load
270r/min
Rate of Power
1.2KW
Driling Diameter
31, 13.5, 9.8
Drilling Time
25s
Weight
17KG
Hydraulic Railway Track Jack
It is new type equipment that is used on the railway line's maintenance and repairing. The most important feature of this machine is that is a dual-purposed machine what meet the needs of the lifting work of the line, as well satisfy lining operations. Hydraulic Track Lifting and Lining Tool is mainly composed of: power part, operating mechanism, body, running gear, landing gear, hook rail device, starting device, dialing device, lower guiding device, lower track, etc. Hydraulic Track Lifting and Lining Tool is specially used for the railway track maintenance. It is used for the track lifting and lining. It has features with simple and compact structure, simple and flexible operation, easy maintenance,fast and reliable performance when go up and down the track.
Hydraulic Railway Track Jack
It is new type equipment that is used on the railway line's maintenance and repairing. The most important feature of this machine is that is a dual-purposed machine what meet the needs of the lifting work of the line, as well satisfy lining operations. Hydraulic Track Lifting and Lining Tool is mainly composed of: power part, operating mechanism, body, running gear, landing gear, hook rail device, starting device, dialing device, lower guiding device, lower track, etc. Hydraulic Track Lifting and Lining Tool is specially used for the railway track maintenance. It is used for the track lifting and lining. It has features with simple and compact structure, simple and flexible operation, easy maintenance,fast and reliable performance when go up and down the track.
Origin from Hubei, China
Old and New
Type hydraulic track blockers
Material Aluminum alloy
The device size is 300X300X150mm
Linkage
Product name Railway stopper
Usage Railway maintenance work
Quality control: iso
Origin: Hubei, China
Brand name: Linkage device
Keywords rail railway stopper
Material Aluminum alloy
Buffer head center height distance: 850mm
Origin from Hubei, China
Old and New
Type track maintenance
Stainless Steel
Device size 1900*1200 * 2500mm
Linkage
Product name Automatic hydraulic track tamper
Material Stainless steel
Origin: Hubei, China
Engine Honda GX390 four-stroke gasoline engine
RPM 3600r / m
Vibration frequency: 66.7Hz
Max. Insertion force: 16KN
Production efficiency: â?¥ 260 sleeper/hour
Hydraulic system pressure: 5 ~ 6MPa
Power supply 9.5kw
Origin from Hubei, China
Type Electrict Rail Profile Grinder
Stainless Steel
Device size 1500mm x 630mm x 760mm
Linkage
Electric motor Type:Y2-Y90L-2
Grinding wheel 125*65*M20
Spindle speed 2840r/min
Wheel distance 1000mm
Wheel stroke 50mm
Weight 54kg
Origin from Hubei, China
Type Angle Grinder
Aluminium
Equipment size 780*270 *310 mm
Linkage
Model SNGM-180
Petrol engine Two-stroke gasoline engine
Power 1.42kW
Speed â?¥7500r / min
Grinding wheel 180 *22.2 * 6 Or 150* 22* 6
Wheel speed 70m / s
The spindle speed 6000r / min
Machine weight 7k
Origin from Hubei, China
Type railway engine
Material Stainless steel
Device size 800mm x 560mm x 500 mm
Linkage
Type: Rail cutting machine
Apply track maintenance work
Engine model: GX270 Fuel injection 5.1KW
Specification Cutting disc: 400*32 * 4 mm cm
Cutting disc no. RPM: 3320 RPM/min
Linear speed cutting sheet: 70 m/s
Cutting accuracy: Verticality 0.4mm, flatness 0.3mm
Cutting time: 2 min (cut 60kg /m rail)
Warranty: 1 year
Origin from Hubei, China
Species Other
The material is alumunium
Equipment size 750 * 800 * 350mm
Linkage
Product name Rail Ultrasonic Flaw Detector
Usage Rail Ultrasonic Flaw Detector
Application Rail Ultrasonic Flaw Detector
Standard crcc
Quality Control iso
Warranty 1YEAR
Customize yes
Aluminium case is used for packing the track gauge .
Different size: 1000mm ,1067mm,1435mm ,1676mm etc
Digital Track Gauge can directly read the measurement values of railway track gauge, super elevation , check rail gauge, back to back distance and flangeway clearance through microelectronics, embedded and sensor technologies and OLED display screen.
FEATURE
1. Large LED backlit display: especially suitable for day outside and dark night
2. Quick calibration operation: simple measurement process
3. Large capacity battery:long standby time
4. Accurate measurement:keep long-term stability
5. Temperature compensation :working temperature is -30~+55
6. Insulated design
7. Anti-electromagnetic interference
8. Waterproof:could use in rainy day
9. power saving function: no operation within 15 minutes, the system will automatically shut down.
10. Approval by CHINA ACADEMY OF RAILWAY SCIENCES
11.1000mm,1067mm,1435mm,1520mm,1600mm,1676mm track gauge is available.
Analogue track gauge is used for measuring the railway track gauge,check rail gauge, back to back distance,super-elevation.
It is Suitbale for railway speed not greater than 160km/h.Traditional compass is more easier for rail workers to accept and
operate.Light weight structure is convenient to carry.
FEATURE
Analogue track gauge has the advantages of affordable price,simple operate and easy calibrate.
Model
LJ-ZCM-A
Type
Digital Rail Frog Wear Gauge
Material
Stainless Steel
Dimensions (L x W x H) (mm)
380*166*25mm
Measure range
0~40mm
Score value
0.01mm
Indication error
± 0. 15mm
Working tempareture
-10~+40
Main ruler measure range
0~380mm
Model
LJ-ZCM-A
Type
Digital Rail Frog Wear Gauge
Material
Stainless Steel
Dimensions (L x W x H) (mm)
380*166*25mm
Measure range
0~40mm
Score value
0.01mm
Indication error
± 0. 15mm
Working temperature
-10~+40
Main ruler measure range
0~380mm
Origin from Hubei, China
Species fishbolt
Material 45 # steel, 45Mn
Device dimensions M22x135mm, M24x140mm
Linkage
Models M22x135mm, M24x140mm
Standard GB
Grade 4.8mm/8.8mm/10.9mm
Material Q235
The machine is suitable for tamping operation on various rail and concrete sleeper track after the overhaul and medium ballast cleaning operation, and also suitable for tamping operation on the ballast bed of new track. This machine has the features of high quality performance, reasonable structure, reliable and high working efficiency, which will satisfy the requirement of ballast tamping operation.
Specification
Model
YD-22
Type
Rail Tamping Machine
Material
Stainless Steel
Dimensions (L x W x H) (mm)
1300 * 750 * 1600mm
Engine
Diesel Engine SF190
Power
7kW
Vibrating force
22kN
Vibrating frequency
66.7Hz
Hydraulic system working pressure
5~6MPa
Max insert force
16kN
Max clamping force
6.5kN * 2
Production efficiency
â?¥ 270 pieces / (group â?¢ hour)
Inserting depth
110mm ± 10mm (underneath the sleeper)
Weight
439kg
The Rail Clamp is an innovative temporary rail joint clamp used prior to welding and to safeguard rail defects prior to repair. The Rail Clamp has been engineered to eliminate many of the disadvantages of other traditional rail clamp designs and provides enhanced performance under all conditions of use. The Rail Clamp design is radically different to the legacy design and guarantees a positive pre-torque angle so as the bolt is tightened the bolt holes remain aligned, eliminating the risk of bent bolts. We test have proved that bolts remain straight even at twice the recommended torque.
· Allows suction jars to be attached to stand rail
· One rail clamp holds one canister
· Rail can hold up to four rail clamps and canisters
The device holds in position the rails during the welding operation and is adaptable to all rail types: vignole, crane rails and grooved rails.
Specification
Type
Shoulders
Material
Alloy Steel
Dimensions (L x W x H) (mm)
600*540*170mm
Place of Origin
LN, China
Span
460mm
Max. lifting force
15KN
This machine is powered by the M165 two-stroke petrol engine imported from Spain. It is a small machine used for forming and grinding the rail head welding joints and surface repairs. It is suitable for rails of 43~75kg/m. The special diaphragm carburetor make sure the engine does not stall after turning 90�°, and the output torque is stable without power attenuation, thus ensuring the precision of rail grinding.
Specification
Model
NGM-6.0
Type
Rail Profile Grinder
Material
Stainless Steel
Dimensions (L x W x H) (mm)
1410*500*850mm
Engine
2 stroke petrol engine M165
Power
6.0kW
Grinding stone speed
â?¥3900r/min
Grinding stone inclination
0~90�°
Grinding stone feeding stroke
42mm
Grinding stone specification
�?150x�?55x70mm
Fuel tank volume
4.5L
Profile wheel span
1000mm
Feed adjustment accuracy
0.125mm
Weight
60kg
This machine is powered by the M165 two-stroke petrol engine imported from Spain. It is a small machine used for forming and grinding the rail head welding joints and surface repairs. It is suitable for rails of 43~75kg/m. The special diaphragm carburetor make sure the engine does not stall after turning 90�°, and the output torque is stable without power attenuation, thus ensuring the precision of rail grinding.
Specification
Model
NGM-6.0
Type
Rail Profile Grinder
Material
Stainless Steel
Dimensions (L x W x H) (mm)
1410*500*850mm
Engine
2 stroke petrol engine M165
Power
6.0kW
Grinding stone speed
â?¥3900r/min
Grinding stone inclination
0~90�°
Grinding stone feeding stroke
42mm
Grinding stone specification
�?150x�?55x70mm
Fuel tank volume
4.5L
Profile wheel span
1000mm
Feed adjustment accuracy
0.125mm
Weight
60kg
Portable Rail Vertical Tamper a special small track maintenance machine for tamping ballast uinder sleepers. Because of its light weight, it can be on and off the track at the same time with the operator. Therefore, the interval between trains can be used for ballast tamping. It is suitable for the maintenance and tamping operation of main line and tumout.
SPECIFICATION
Model
ND-22
Type
Rail Tamper
Material
Stainless Steel
Dimensions (L x W x H) (mm)
1077mm 448mm 362mm
Engine
G5LS Two-stroke petrol
Power
2.2 KW
Impact frequency
128Hz 138Hz
Exciting force
5500N
Weight
19 Kg
The main part of the wheel tread is an inward inclination of 1:40 . In order to make the top of the rail track under the wheel load with cone tread stressed uniformly ,decrease load offset, reduce rail web stress , avoid slit between rail head and rail web, the railway track shall not be laid upright for straight line, it shall be inward inclined ,this inward inclination of rail called Rail Cant, it is a high precision ,portable , numeric rail geometrical testing tool.
Place of Origin Hubei, China
Type Battery Powered Rail Bolt Wrench
Material Stainless Steel
Dimensions (L x W x H) (mm) 1100*700*450mm
Brand Name Linkage
Product name Rail Battery-powered Coach screwing Machine
Place of Origin Hubei
Application Impact Torque Wrench
Customize: yes
Usage: lithium Impact Wrench
Warranty 1YEAR
Cutting time 110s( cut off 60kg/m rail)
type Rail battery Impact Torque Wrench
Place of Origin Hubei, China
Type Rail Bolt Wrench
Material Stainless Steel
Dimensions (L x W x H) (mm) 830*280*380mm
Brand Name Linkage
Petrol engine Two stroke petrol engine
Rated Revolution 12000r / min
Rated power 3.6kw
Spindle speed 1130R / min
Torque 1800n. M
NLB-300 railway construction rail fastener wrench is used for tightening and loosening sleeper bolts, hook-bolt nuts, etc. High power petrol engine ensure large torque and high working efficiency.
Specification
Model
NLB-300
Type
Rail Impact Wrench
Material
Stainless Steel
Dimensions (L x W x H) (mm)
1300*510*760mm
Main shaft rpm
780r/min
Max. loosen torque
300 Nâ?¢m
Max. fasten torque
150 Nâ?¢m
Working efficiency
10 pieces/min
Petrol engine
1) Model: GX160
(2) Rated power: 4Kw
(3) RPM: 3600r/min
Weight
60kg
NQG5.1 Rail Cutting Machine
To furnish the varying desires of our customers, we are immersed in offering a world class consignment of Abrasive Rail Cutter. Abrasive Rail Cutter is suitable for cutting upto 60 Kg. 110 uts Rails. the machine has features of fast cutting speed, high utilization rate of cutting discs, high quality of cutting profile, convenient operation, easy motion and safe use. the machine comprises of petrol driven engine, integrated with a cutting unit fitted with an abrasive disc.
NQG-5.8 lightweight abrasive rail saw is a railway maintenance tool. It not only cuts rails with high speed and high quality, but also has low wear cutting discs. It is locked by rail clamps. It has a simple structure, light weight, safety and easy movement. It is suitable for maintenance, repair of broken rails of seamless tracks, and cutting of steel rails in long rail welding factories.
NQG-5.8 Abrasive Rail Saw
NQG-5.8 lightweight abrasive rail saw is a railway maintenance tool. It not only cuts rails with high speed and high quality, but also has low wear cutting discs. It is locked by rail clamps. It has a simple structure, light weight, safety and easy movement. It is suitable for maintenance, repair of broken rails of seamless tracks, and cutting of steel rails in long rail welding factories.
Specification
Model
NQG-5.8
Type
Rail Cutting Machine
Material
Stainless Steel
Dimensions (L x W x H) (mm)
850*480*500mm
Engine
Single-cylinder, air-cooling
two-stroke petrol engine
(imported from Sweden K1270R)5.8 kW
Cutting disc form
Double- layer reinforced wire mesh
Linear speed of cutting disc
100 m/s
Rated RPM
4500 r/min
Specification of cutting disc
355x 25.4 x3.8mm
Cutting accuracy
Vertical deviation of notch and rail 0.30mm
Deviation of bidirectional cutting interfaces 0. 35mm
Cutting time
110s( cut off 60kg/m rail)
Fuel tank capacity
1.25 L
Weight
22kg
CTS -1002 Handy Ultrasonic Flaw Detector
The CTS -1002 is a light-weight instrument with excellenterformance which accumulates the experiences of 50 years for making ultrasonic instruments . This instrument is EN12668-1 : 2010 compliance and has an industrial-leveled TFT display with full WVGA ( 800X480 resolution providing superior visibility in all lighting conditions including direct sunshine.
Hydraulic transmission, static torque stepless adjustment tightening torque; Accurate and constant output torque ensures accurate fastening of the sleeper nut;
High speed tightening at low torque, increased resistance torque, automatic
Switch to high torque low speed;
Torque visual display, night lighting (using LED hair
Photodiode), convenient and efficient;
The machine is powered by gasoline engine and carried out by hydraulic system
Drive and precise control, is the railway new and old lines, special
Especially the high-speed railway line is very suitable for construction and maintenance
Trade machinery;
The machine hydraulic system adopts advanced technical principle,
Achieves high speed tightening when the torque is small, and increases when the drag torque
Large to a certain automatic switch to large torque low speed, so that the liquid
The pressure wrench can output more tightening torque;
The mechanical part of the hydraulic wrench wear will not be affected
Hydraulic wrench accurate tightening torque output and display;
double head wrench, high efficiency, operation and adjustment
The section is very convenient and light in weight. The nut sleeve adopts 10,000
The floating mode makes it easier to insert or detangle the sleeper
Mother, sleeve stroke is convenient to change;
This machine is suitable for the construction and maintenance of various specifications sleeper nuts and bolts (including rectangular bolts) of various types of railway rail.
