NEOFLON FEP is melt processable perfluoro co-polymer of tetrafluoroethylene and hexafluoropropylene.
FEP has excellent electrical properties like PTFE because FEP consists of only fluorine atoms and carbon atoms. The chemical resistance capability and mechanical characteristics are the same as ones of PFA, however the heat resistance is lower than PFA.
NEOFLON FEP NP-Series
NEOFLON FEP is melt processable perfluoro co-polymer of tetrafluoroethylene and hexafluoropropylene.
FEP has excellent electrical properties like PTFE because FEP consists of only fluorine atoms and carbon atoms. The chemical resistance capability and mechanical characteristics are the same as ones of PFA, however the heat resistance is lower than PFA.
NEOFLON FEP NP-Series
NEOFLON FEP is melt processable perfluoro co-polymer of tetrafluoroethylene and hexafluoropropylene.
FEP has excellent electrical properties like PTFE because FEP consists of only fluorine atoms and carbon atoms. The chemical resistance capability and mechanical characteristics are the same as ones of PFA, however the heat resistance is lower than PFA.
NEOFLON ETFE EP-506 is a resin for extrusion of thin coatingsof small wire sizessuch as aerospace wire, automotive wire, appliance wire, thin film and tubing, etc.. Itmay be used for injection molding of thin wall parts.
Ethylene tetrafluoroethylene copolymer is a kind of chemical substance. ETFE is the strongest and toughest fluoroplastic. It not only maintains the good heat resistance, chemical resistance and electrical insulation properties of PTFE, but also greatly improves the radiation resistance and mechanical properties. The tensile strength can reach 50MPa, which is nearly twice that of polytetrafluoroethylene.
NEOFLON PFA AP-Series
NEOFLON PFA is a copolymer of tetrafluoroethylene and perfluoroalkyl vinylether. It is a perfluoro polymer consisting of only carbon atoms and fluorine atoms without any hydrogen atom.
It has the same excellent performance as PTFE in a wide range from extremely low to high temperatures. In addition, it has excellent transparency, mechanical strength at high temperature. It can be molded in the same molding method as general thermoplastic resins.
NEOFLON PFA AP-210 is excellent in melt flowability and is suitable for injection molding and extrusion molding.
Introduction
- AP-210 is a copolymer of tetrafluoroethylene and perfluoroalkyl vinyl ether.
- Good melt flowability while maintaining excellent properties of PTFE. It can be melt-molded as a thermoplastic resin by injection molding and extrusion molding.
- Excellent chemical resistance which is not affected by most of the chemicals.
- Excellent heat resistance. Continuous use temperature is 260 â??.
- It retains flexibility without losing toughness under the environment from cryogenic to high temperature.
- Low dielectric constant and dielectric loss tangent in a wide range of temperature and frequency.
- It shows high electrical resistance and dielectric strength.
- Nonflammable like POLYFLON PTFE and NEOFLON FEP.
- Excellent weather resistance. No properties change even when exposed outside for a long time.
- Non-stickiness. It shows excellent releasability and water repellency / oil repellency.
NEOFLON ETFE is a copolymer of tetrafluoroethylene and ethylene, and has the lowest specific gravity among all fluoropolymers. It has superior characteristics in melt processability and mechanical properties compared with PTFE and FEP, and has good electrical and chemical properties. It is suitable for applications requiring its mechanical toughness, chemical resistance, heat resistance and electrical properties.
DAIKIN POLYFLON PTFE Polytetrafluoroethylene Resin
POLYFLON PTFE is composed of polytetrafuluoroethylene, the most commonly used fluoroploymer. PTFE has a very long chain molecular structure in which all of the hydrogen atoms of polyethylene are replaced by fluorine atoms.
PTFE is superior in heat resistance and chemical resistance compared with the other plastics. These properties result from stable chemical structure consisting of only carbon and fluorine atoms with the highest electro negativity.
DAIKIN PTFE M-Series:
M-18/ M-18F
M-111
M-112
M-139
M-531
M-532 / M-532C
M-533
DAIKIN PTFE F-Series:
F-104 / F-104C
F-106C
F-201
F-205
F-208/ F-208H
F-302
DAIKIN PTFE D-Series:
D-110
D-210 /D-210C
D-411
D-711
DAIKIN PTFE OTHER GRADE:
MG-1030 / MG-1030F
MG-1040 / MG-1040F
MG-1050 / MG-1050F
MG-1241 / MG-1241F
MG-1431 / MG-1431F
MG-2030
MG-2060
MG-3060
MG-5201 / MG-5201F
MG-5202 / MG-5202F
MG-6020 / MG-6020F
MG-6030 / MG-6030F
MG-6050 / MG-6050F
MG-7040 / MG-7040F
MG-7060 / MG-7060F
L-2
L-5 / L-5F
We can give discount according to order quantity
DAIKIN POLYFLON PTFE coating materials
EK-1908S-201L is a kind of non-stick coating based on PTFE resin with high-performance of corrosion resistance, non-stickness, high crack DFT and high gloss. 1.2 Main applications The film obtained can be widely used for ordinary kitchenutensils and household appliance
We can give discount according to order quantity
DAIKIN POLYFLON PTFE Polytetrafluoroethylene Resin
POLYFLON PTFE is composed of polytetrafuluoroethylene, the most commonly used fluoroploymer. PTFE has a very long chain molecular structure in which all of the hydrogen atoms of polyethylene are replaced by fluorine atoms.
PTFE is superior in heat resistance and chemical resistance compared with the other plastics. These properties result from stable chemical structure consisting of only carbon and fluorine atoms with the highest electro negativity.
DAIKIN PTFE M-Series:
M-18/ M-18F
M-111
M-112
M-139
M-531
M-532 / M-532C
M-533
DAIKIN PTFE F-Series:
F-104 / F-104C
F-106C
F-201
F-205
F-208/ F-208H
F-302
DAIKIN PTFE D-Series:
D-110
D-210 /D-210C
D-411
D-711
DAIKIN PTFE OTHER GRADE:
MG-1030 / MG-1030F
MG-1040 / MG-1040F
MG-1050 / MG-1050F
MG-1241 / MG-1241F
MG-1431 / MG-1431F
MG-2030
MG-2060
MG-3060
MG-5201 / MG-5201F
MG-5202 / MG-5202F
MG-6020 / MG-6020F
MG-6030 / MG-6030F
MG-6050 / MG-6050F
MG-7040 / MG-7040F
MG-7060 / MG-7060F
L-2
L-5 / L-5F
We can give discount according to order quantity
NEOFLON PFA AP-Series
NEOFLON PFA is a copolymer of tetrafluoroethylene and perfluoroalkyl vinylether. It is a perfluoro polymer consisting of only carbon atoms and fluorine atoms without any hydrogen atom.
It has the same excellent performance as PTFE in a wide range from extremely low to high temperatures. In addition, it has excellent transparency, mechanical strength at high temperature. It can be molded in the same molding method as general thermoplastic resins.
NEOFLON PFA AP-Series
NEOFLON PFA is a copolymer of tetrafluoroethylene and perfluoroalkyl vinylether. It is a perfluoro polymer consisting of only carbon atoms and fluorine atoms without any hydrogen atom.
It has the same excellent performance as PTFE in a wide range from extremely low to high temperatures. In addition, it has excellent transparency, mechanical strength at high temperature. It can be molded in the same molding method as general thermoplastic resins.
NEOFLON FEP NP-Series
NEOFLON FEP is melt processable perfluoro co-polymer of tetrafluoroethylene and hexafluoropropylene.
FEP has excellent electrical properties like PTFE because FEP consists of only fluorine atoms and carbon atoms. The chemical resistance capability and mechanical characteristics are the same as ones of PFA, however the heat resistance is lower than PFA.
