Daikin Neoflon Pfa Ap-230/ Ap-230Asl

NEOFLON PFA AP-Series

NEOFLON PFA is a copolymer of tetrafluoroethylene and perfluoroalkyl vinylether. It is a perfluoro polymer consisting of only carbon atoms and fluorine atoms without any hydrogen atom.
It has the same excellent performance as PTFE in a wide range from extremely low to high temperatures. In addition, it has excellent transparency, mechanical strength at high temperature. It can be molded in the same molding method as general thermoplastic resins.

Tehbotol Sosro.

Available Variants:
1. Tehbotol Sosro Glass Bottle (1 Box = 24 x 220 ml)
2. Tehbotol Sosro PET 450 ml (1 Box = 24 x 450 ml)
3. Tehbotol Sosro PET 350 ml (1 Box = 12 x 350 ml)
4. Tehbotol Sosro Pouch 230 ml (1 Box = 24 x 230 ml)
5. Tehbotol Sosro Tetra Pak 200 ml (1 Box = 24 x 200 ml)
6. Tehbotol Sosro Tetra Pak 250 ml (1 Box = 24 x 250 ml)
7. Tehbotol Sosro Tetra Pak 330 ml (1 Box = 24 x 330 ml)
8. Tehbotol Sosro Tetra Pak 1000 ml (1 Box = 12 x 1000 ml)

Shelf Life = 9 Months
Port of Loading = Semarang, Indonesia

NEOFLON PFA AP-Series

NEOFLON PFA is a copolymer of tetrafluoroethylene and perfluoroalkyl vinylether. It is a perfluoro polymer consisting of only carbon atoms and fluorine atoms without any hydrogen atom.
It has the same excellent performance as PTFE in a wide range from extremely low to high temperatures. In addition, it has excellent transparency, mechanical strength at high temperature. It can be molded in the same molding method as general thermoplastic resins.

NEOFLON PFA AP-210 is excellent in melt flowability and is suitable for injection molding and extrusion molding.

Introduction

- AP-210 is a copolymer of tetrafluoroethylene and perfluoroalkyl vinyl ether.

- Good melt flowability while maintaining excellent properties of PTFE. It can be melt-molded as a thermoplastic resin by injection molding and extrusion molding.

- Excellent chemical resistance which is not affected by most of the chemicals.

- Excellent heat resistance. Continuous use temperature is 260 â??.

- It retains flexibility without losing toughness under the environment from cryogenic to high temperature.

- Low dielectric constant and dielectric loss tangent in a wide range of temperature and frequency.

- It shows high electrical resistance and dielectric strength.

- Nonflammable like POLYFLON PTFE and NEOFLON FEP.

- Excellent weather resistance. No properties change even when exposed outside for a long time.

- Non-stickiness. It shows excellent releasability and water repellency / oil repellency.

HDPE Jerrycan Regrind Plastic Scrap
MATERIAL: HDPE Jerrycan Regrind
CATEGORY: HDPE
TYPE: Regrind
GRADE: Mix
SPECIFICATION: Post-industrial; Blow grade; Made from jerry can; MFI 0,22 g (230 C/2,16kg/10min); Humidity 0.02% and; Impurity <1%
ORIGIN: Spain
LOADING WEIGHT: 20 Tons
FOB (USD/Ton): 900-1100

Polypropylene Co-Polymer resins primarily made from battery and industrial waste, with black color, suitable for injection applications, MFR 10.0-12.0 g/10min-2.16kg @230 C. degree.

Polypropylene Homo Polymer resins primarily made from consumer and industrial waste, with blue, red, green and extra colors, suitable for extrusion mats and injection applications, MFR 14.0-18.0 g/10min - 2.16kg @230 C. degree.

Isotactic Polypropylene Raffia grade (PP Raffia), primarily made from woven sacks and jumbo bags, suitable for bitumen water proofing membranes application, with two main grades, first one is Black Color with MFR 7-10 g/10min-2.16kg @230 C. degree, and the second type is Dark Green Color with MFR 11-14 g/10min-2.16kg @230 C. degree which is suitable for high quality product of Bitumen Water Proofing Membranes as an additive to improve mechanical properties and also for injection application as vegetable crates and chairs.

NEOFLON PFA AP-Series

NEOFLON PFA is a copolymer of tetrafluoroethylene and perfluoroalkyl vinylether. It is a perfluoro polymer consisting of only carbon atoms and fluorine atoms without any hydrogen atom.
It has the same excellent performance as PTFE in a wide range from extremely low to high temperatures. In addition, it has excellent transparency, mechanical strength at high temperature. It can be molded in the same molding method as general thermoplastic resins.


Grades and Features of AP-Series
Grades MFR
(g/10 min.) Features
AP-201 20 - 30 Superior in melt flowability.
Suitable for injection-molded articles that have complex shape, and for ultrafine thin-wire coating (AWG34 - 44).
AP-202 65 - 80 Excellent melt flowability.
Suitable for injection-molded articles that have complex shape, and for thin-wire coating (AWG44 - 52).
AP-210 10 - 17 Good melt flowability.
Suitable for injection molding.
AP-230 1.5 - 2.5 Superior in stress crack resistance.
Suitable for extrusion and transfer molding.
AP-201SH 20 - 30 High purity grade.
Superior in melt flowability.
Suitable for complex shape articles.
AP-211SH 10 - 17 High purity grade.
Long-term flexibility and good stress crack resistance.
Suitable for joints and parts for pumps.
AP-215SH 10 - 17 High purity grade.
Suitable for injection molding.
Suitable for joints and parts for pumps.
AP-231SH 1.5 - 2.5 High purity grade.
Long-term flexibility and good stress crack resistance.
Suitable for extrusion and transfer molding.
AP-210AS 11 - 14 Anti-static grade.
Suitable for injection molding.
AP-230AS 1.5 - 3.0 Anti-static grade.
Suitable for extrusion molding.
AP-230ASL 1.0 - 2.5 Anti-static grade.
Suitable for extrusion molding.