1. Utilizing the American Copeland high-efficiency flexible jet booster, the unit has stable running performance and high heating efficiency, it has a special gas balance and oil balance design to ensure the stable operation of the unit.
2. The temperature difference between the inlet and outlet water of the unit is stable, the fluctuation range of the refrigerant pressure is small, the hot water is quickly prepared with small power consumption, the temperature of the outlet water is 55. High-efficiency casing heat exchanger with small volume, high heat exchanger efficiency, and long service life.
3. After the power is cut off, the unit will be automatically recorded tje current various working parameters. It is not necessary to reset the parameters when its restarted, and it will be working as usual, which is convenient and worry-free.
There are 4 models of the products. ENE-32DKCB/ ENE-95DKCB/ ENE-130DKCB/ ENE-160DKCB
Heating capacity(kW) 31.5
Input Power(kW 9.2
Protection level IPX4
Outlet water temperature() 40~60
Dimensins(mm) 1200*970*1420
Circulating water flow ratio(m/h) 8
Applicable ambient temperature range -25~45
Heating capacity(kW) 95
Input Power(kW27.6
Protection level IPX4
Outlet water temperature() 40~60
Dimensins(mm) 2400*1135*2150
Circulating water flow ratio(m/h) 18
Applicable ambient temperature range -25~45
Heating capacity(kW) 130
Input Power(kW38
Protection level IPX4
Outlet water temperature() 40~60
Dimensions(mm) 2400*1900*2150
Circulating water flow ratio(m/h) 20
Applicable ambient temperature range -25~45
Heating capacity(kW) 160
Input Power(kW47
Protection level IPX4
Outlet water temperature() 40~60
Dimensins(mm) 2400*2000*2420
Circulating water flow ratio(m/h) 24
Applicable ambient temperature range -25~45
1.High efficiency and energy saving: adopt an internationally famous brand compressor and heat pump special compressor, environmental protection refrigerant, high-efficiency heat exchanger, adhering to heat pump control technology, special high-temperature heating system. The system is more stable, with the high thermal efficiency of high-temperature drying (80-85â??), saving energy significantly, and the cost of producing heat is much lower than that of electric heating, gas, and fuel oil.
2.Easy to use: only power on can start the operation, no need for special room prevention equipment;
Green environmental protection: high-temperature hot water can be used as a thermal medium to bake the required drying materials through heat pump drying equipment. The unit eliminates the pollution of waste gas and waste residue caused by combustion.
Remarks:
1. All the above quotations are the EXW price with our standard packing.
2. Customized is available, samples can be provided.
3.Lead time: upon receipt of payment.
4. This quotation is valid within a month.
Shipping method: UPS/FedEx/DHL/TNT/By Sea/By Air etc.
1. Utilize safe water and electricity separation technology: heat will be transferred through the refrigerant and heat exchangers to achieve safe separation of water and electricity, the safety of users is assured.
2. It has great heating and insulation capacity, which will be saving more energy: it adopts the design of central water supply system to realize multi-point three-dimensional hot water supply, and it's able to meet the demand of domestic water such as bathing, washing, kitchen, etc.
3. The special compressor for heat pump not only guarantees the reliable operation of the production, but also greatly improves the operating efficiency of the product, especially for the low-temperature state, the effect is more prominent, and it can be stably operated under extreme and inferior climate.
There are 2 models of the product. ENE-3KR & ENE-4KR(V)
Heating capacity(kW) 3.1
Power Specifications 220V~50Hz
Water outlet(L/h) 75
Heating capacity(kW) 4.0
Power Specifications 220V~50Hz
Water outlet(L/h) 77
Outlet water temperature(â??) 40~60
Protection level IPX4
Dimensions(mm) 700*534*250
Configuration of the water tank(L) 200
Applicable ambient temperature range(â??)-7~45
Heating capacity(kW) 4.0
Power Specifications 220V~50Hz
Water outlet(L/h) 77
Outlet water temperature(â??) 40~60
Protection level IPX4
Dimensions(mm) 700*534*250
Configuration of the water tank(L) 200
Applicable ambient temperature range() -7~45
1.Rated heating conditions A7/W35: outdoor air temp. 7 DB/6 WB, inlet water temp. 30, outlet water temp. 35
2.Rated cooling conditions A35W7: outdoor air temp. 35 DB/24 WB, inlet water temp. 12, outlet water temp.
3. Due to product improvement, the above data are subject to change without prior notice, please take the nameplate as standard.
3KW-7KW R32/R410A refrigerant, CE standard mini pool heat pump for above-ground pool heating. Side discharge, Injection molded ABS plastic cabinet.
Product features:Â
1, Heating only. Side discharge. Injection-molded ABS Plastic.
2, Various safety protection:
Low-pressure switch, RCD plug, over ambient / water temp, compressor discharge, etc., ensures an unworried running.
3, Simple operation, With LCD display controlling panel (3 digits) and RCD plug. Authentically plug & play.
1.Touch-type man-machine interface, fully automatic operation, display equipment status, operation mode, water temperature, and fault code, and other functions. Access to the Internet opens up "Internet+" life.
2. Accurate control of air supply, to meet the requirements of greatly improving quality and energy efficiency at low ambient temperature, superheating capacity.
3. Large evaporation area, efficient heat exchange, fast defrosting, fast defrosting water, acid rain, durable.
4. Strong waterproof, strong toughness, no deformation, a large amount of air exhaust.
5. Special waterproof design, high efficiency, and energy-saving, stable and reliable, low noise.
6. Precise adjustment of refrigerant flow and pressure, easy to fully evaporate, absorb more heat.
7. Comprehensive heat transfer performance of wall side circulation and complex scour boundary layer, resistance to high-temperature steam, impact corrosion, and scale formation.
8. The original valve chamber design and refrigerant flow logic position arrangement scheme reduce the internal leakage of the high and low-pressure side and obtain a higher energy efficiency ratio.
9. Fully intelligent, automatic real-time monitoring and detection, fast and accurate to reach the preset temperature.
1. Quick installation
All component equipment and connection pipes are assembled in the factory and integrated into the overall structure. On-site installation with an outdoor rainproof shell, no machine room needed.
Ã?Â
2. Short debugging period
The operational testing is finished before leaving the factory, reducing on-site debugging time.
Ã?Â
3. High efficiency
The integrated cooling-water station including compressor, water pump, and cooling fan. Its COP and LPLV are significantly higher than the air-cooled and water-cooled machine room system.
Ã?Â
4. Stability
Equipment is assembled and integrated into the factory to ensure product safety and stability by pressure, airtight, electric, and performance test.
Ã?Â
5. Simple operation
Adopts industrial touch tablet as a human-computer interface, to monitor and control compressor, water pump, cooling fan, and other instruments in one interface.
6. Condensation heat recovery(optional)
While in the process of refrigeration, up to 60 hot water can be used for heating or sanitary water by heat recovery heat exchanger.
7.Multiple natural cooling modes(optional)
Intelligent Chiller Station
Remarks:
1. All the above quotations are the EXW price with our standard packing.
2. Customized is available, samples can be provided.
3.Lead time: upon receipt of payment.
4. This quotation is valid within a month.
Shipping method: UPS/FedEx/DHL/TNT/By Sea/By Air etc.