1. Utilize safe water and electricity separation technology: heat will be transferred through the refrigerant and heat exchangers to achieve safe separation of water and electricity, the safety of users is assured.
2. It has great heating and insulation capacity, which will be saving more energy: it adopts the design of central water supply system to realize multi-point three-dimensional hot water supply, and it's able to meet the demand of domestic water such as bathing, washing, kitchen, etc.
3. The special compressor for heat pump not only guarantees the reliable operation of the production, but also greatly improves the operating efficiency of the product, especially for the low-temperature state, the effect is more prominent, and it can be stably operated under extreme and inferior climate.
There are 2 models of the product. ENE-3KR & ENE-4KR(V)
Heating capacity(kW) 3.1
Power Specifications 220V~50Hz
Water outlet(L/h) 75
Heating capacity(kW) 4.0
Power Specifications 220V~50Hz
Water outlet(L/h) 77
Outlet water temperature(â??) 40~60
Protection level IPX4
Dimensions(mm) 700*534*250
Configuration of the water tank(L) 200
Applicable ambient temperature range(â??)-7~45
Heating capacity(kW) 4.0
Power Specifications 220V~50Hz
Water outlet(L/h) 77
Outlet water temperature(â??) 40~60
Protection level IPX4
Dimensions(mm) 700*534*250
Configuration of the water tank(L) 200
Applicable ambient temperature range() -7~45
This commercial hot water heat pump is the best solution for hot water supply of commercial project, and can work with advantages of high safety, stability, much convenience, energy saving, and environment friendly, which assures 24 hours comfortable hot water using. It is widely used in hot water project of school, hotel, hospital, supper market and other large building, which needs large water volume supply. Commercial hot water heat pump series Model YINI-050S-RS Heating mode Circulating+Direct heat Ambient temp.range Rated heating capacity 18KW COP 4W/W Max. Running Current 9.7A Power supply 380V 3N 50Hz IP Code IPX4 Safety function High and low pressure protection, Overload protection, Temperature protection, Power phase sequence protection, etc. Refrigerant type/weight R407C/2.0kg Compressor QTY 1 PCS Compressor type Scroll Max. outlet water temperature 60 Water side heat exchanger type Casing/high efficiency tank Direct heat waterpipe nozzle G1 Internal thread (inch) Circulating waterpipe nozzle G1 Internal thread (inch) Air out type Top discharge Fan motor QTY 1 PCS machine dimension Packing dimension Net weight 130KG Gross weight 150KG Detailed Images Main Features 1) Copeland scroll compressor, quiet and high efficiency. 2) High efficiency heat exchanger. 3) 600 stage adjustment precision electronic expansion valve. 4) Schneider electrical components. 5) Intelligent controlling system. 6) Intelligent EE valve, excellent efficiency at different ambient temp. 7) Easy installation and LCD operation. 8) Automatically defrosting. Optional: R410a, R22, R407c refrigerant is available.
Supplier: Indoor heating products, mainly including electric heaters and water heaters
Model Number: Portable Air Conditioner ((WT-F26 gray) Power Type: DC Use: Room Condition: New After-sales Service Provided: None Warranty:1 year Type: PORTABLE Certification:CB, ce Cooling/Heating:Cooling Only Application:Car, Commercial, Garage, Hotel, Household, Outdoor, RV Power Source:Electric, usb Remote Control: Yes App-Controlled: Yes
Supplier: Towel radiators & towel warmers, bathroom accessories like robe hooks, toilet roll holders, etc, hvac (heating, ventilation, and air conditioning)
, heating systems, aluminium/aluminum panel radiators, electric heaters, boilers / solid fuel boilers / combi boilers, gas stoves & heaters, underfloor heating systems, radiant heating systems, plumbing & piping, pipes & fittings
Services: Product source research
private label production
logistics and customs clearance
quality control engineering
special production on demand
* PHOSCAST Phoscast : Phosphate Bonded Castables * PURPOSE customers using FBC boilers (Particularly underbed feed FBC boilers) for the protection of inbed coils against erosion potential by applying highly abrasive resistant refractory on inbed coils above fuel feed system. BACKGROUND * Two of such actions are providing special alloy studs on inbed coils and applying highly abrasive resistant refractory on the outer bottom loops of inbed Coils which are above the fuel feed nozzles. * GANESHAS has taken number of approaches to identify the key factors affecting erosion rates with an objective to enhance the life of inbed tubes as well as implementing the corrective action to reduce the erosion rates. Phosphate coatings are often used to protect steel parts against rusting and other types of corrosion * Erosion of inbed coils in fluid bed combustor is unavoidable phenomenon however the rate of metal wastage and thus the life of tubes depends on various factors like ash & fuel properties, design of Combustor / feeding system, flue gas velocities operating conditions etc. It has been also observed that maximum erosion prone inbed coils are those which come above fuel feed nozzles and an area of approximately 1 to 1.5 mts around fuel feed systems are badly affected. APPLICATION Phoscast-90 XR can be applied by ramming with wooden mallet having adequately large head @" dia x 5" length x 10â?? Jong handle). The desired lining or repair thickness is built up in several courses while ramming the mass to uniform thickness. Phoscast refractory should never be trawled to obtain smooth surface; ramming only should finish surface. Any excess mass is to be sliced off with trowel edge and then finished by ramming again for bed coil. Tube application of AFBC boiler, the material pasty mass should be finger pressed into the studs of the tube with maximum force. Finish should be given by pressing the hand palm against material applied, using surgical type thin rubber hand gloves.
Model: 19 SEER2 Inverter Air Conditioner with Heat Pump Condition: New: A brand-new, unused, unopened, undamaged item in its original packaging. Number of Cool Speeds: 3 Timer Control: 24 Hours Number of Fan Motors: 1 System Configuration: Multi-Positional Blower Motor Speed: Multi Speed High Efficiency Power Source: Corded Electric Number of Compressors: 1 Number of Heat Settings: 2 MPN: Does Not Apply Power Phase: 1-3 Phase BTU Heating Rating: 9000-36000 BTU Control Style: Remote Control, App Control Number of Zones: 1 BTU Cooling Rating: 9000-36000 BTU Energy Efficiency Ratio (EER): 12.1-13 Voltage: 115V-230V Area Covered: 450-2000 sq ft Features: Digital Display, App Compatibility, Eco-Friendly, Timer, Sleep Mode, Fan & Dehumidifier, Dust Filter, Fast Cooling & Heating, 4 Way Swing, Self Cleaning, Auto Defrost, Smart Control
Theodoor heat pump (unit) is the world's most energy-efficient water heating equipment, through the national association of energy recognized the "green energy-saving products, " theodoor heat pump is the use of the lessons of the heat in the air, making 55-60 centigrade ( up to 65 centigrade) water quality of life. Schools, hospitals, hotels, factories, villas, family and so on need to use all the hot places can be used to install. Theodoor heat pump user can set the temperature of hot water to run automatically in a row, for water heating, highly intelligent, flexible and easy to use, energy saving and environmental protection, safe, reliable, convenient maintenance features, is a unit of family life and ideals of hot water supply products
90kw R407 refrigerant commercial heat pump water heater KFXY-090UCII Heat Pump Water Heater , Commercial Heat Pump Water Heater 1) Copeland scroll compressor, quiet and high efficiency. 2) High efficiency heat exchanger. 3) 600 stage adjustment precision electronic expansion valve. 4) Schneider electrical components. 5) Intelligent controlling system. 6) Intelligent EE valve, excellent efficiency at different ambient temp. 7) Automatically defrosting. 8) Easy installation and LCD operation. Optional: R410a, R22, R407c refrigerant is available.
Swimming Pool Heat pump are specially designed and engineered for pool or spa water temperature control. Intelligent control system are let the units high efficiency and stable working performance. The COP could be 6.8 which saves at least 80% energy compared with traditional electric swimming pool heating equipments. Suitable for large pools in hotel, public parks, schools, sport center, gyms, etc. enter, gyms, etc. Wholesale Constant Temperature Heater Swimming Pool Heat Pump Main Features 1) PVC Titanium heat exchanger with full resistance against corrosion, more durable. 2) Compact structure, easy demountable for access. 3) High efficiency compressor, saving energy. 4) Flow switch for water flow protection. 5) Intelligent controller and adjustment by quick mind microprocessor. 6) Intelligent LCD display wired controller. 7) Air exchanger (fins-coil )with hydrophilic coating. 8) Automatic defrosting function included. Optional: R410a, R32, R407c refrigerant is available. Model YINI-010-YC Heating mode Circulating Ambient temp.range Rated heating capacity 7.8KW COP 6.7W/W Rated input power 1.15KW Max. Running Current 5.9A Power supply 220V-240V 1N 50Hz IP Code IPX4 Safety function High and low pressure protection, Overload protection, Temperature protection, Power phase sequence protection, etc. Refrigerant type R32 Compressor QTY 1 PCS Compressor type Scroll outlet water temperature 28 Heat Exchanger Titanium Air Flow Direction Horizontal Automatic defrosting by 4 way valve Casing Material ABS plastic Rated water flow 2.5 mh Air out type Top discharge Fan motor QTY 1 PCS Noise 56 dB(A) machine dimension Packing dimension Net weight 44kg Gross weight 55kg
